Vertical Processing Centers used for sale (232)

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

x-travel: 700 mmy-travel: 550 mmz-travel: 500 mmcontrol: TNC 426 table-size: 900 x 550 mmtaper ISO: SK 40 speeds: 18000 U/mintotal power requirement: 50 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 3,3 x 2,43 x 2,98 mDECKEL MAHO DMC 70 V Hi-dyn machining centerfeaturing:30-station tool changerChip conveyorOil mist filtration systemTransport dimensions: 650 x 243 x 297 cm, 8 tonnesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

Manufacturer: YCM Model: XV 560 A Year: 2011 Condition: Used Stock number: 9493 Control system: FANUC MXP-100FA Switch-on hours: 11362 h Operating hours: 3460 h Work table length: 700 mm Work table width: 420 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 410 mm Travel Z axis: 450 mm

The machine is in good technical condition; testing is possible by prior arrangement. It is designed for machining parts made of wood, plastic, and composite materials. It features the Siemens SINUMERIK 840D/810D control system.

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Control OSP 100U Travel X/Y/Z: 560 x 610 x 560 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 60 Wkz., SK 40 Chip conveyor d

Manufacturer: AXA Model No.: DBZ Year: 2007 Condition: Used Stock number: 9465 Work table length: 1350 mm Work table width: 600 mm Number of axes: 4 pieces X-axis travel: 2x 750 mm Y-axis travel: 550 mm Z-axis travel: 600 mm In 2022, GO was carried out. Equipment: Technical documentation Chip conveyor Round Table Workpiece feeding Workpiece Remover Handwheel 2x hydraulic power unit for vices

Manufacturer: Hedelius Model: Forte 7 Condition: Used Stock number: 9457 Control system: Siemens Sinumerik Switch-on hours: 2682 h Operating hours: 640 h Work table length: 3080 mm Work table width: 700 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 18000 1/min X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Number of all tools: 45 pieces

Manufacturer: HAAS Model: VF 2SS Year: 2014 Condition: Used Stock number: 9442 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2013 Condition: Used Stock number: 9441 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 2x double 4th axle

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS Year: 2012 Condition: Used Stock number: 9440 Control system: HAAS Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 680 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3539 kg Equipment: 4. Axis

Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model: VF 2SS HE Year: 2007 Condition: Used Stock number: 9426 Work table length: 914 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Tool magazine: 24 pieces Maximum vertical spindle speed: 8000 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Cone: ISO 40 Equipment: Pallet system

Key data: 2134 mm, 1016 mm, 762 mm

Manufacturer: HAAS Model: VF 9 Year: 2008 Condition: Used Stock number: 9399 Control system: HAAS Work table length: 2134 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 2134 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 12837 kg 2025: Spindle replacement

CONTROLS  CNC controls WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 1040 mm  Y-axis travel: 510 mm  Z-axis travel: 640 mmTABLE  table surface (left-right): 1460 mmSPINDLE / HEAD  spindle revolutions (max): 7000 /minTOOL MAGAZINE  number of positions: 24 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 Hz

Key data: 1016 mm, 610 mm, 1032 mm

Manufacturer: TRENS Model: MC 100 VA Year: 2002 Condition: Used Stock number: 9396 Control system: Heindenhein 426 Switch-on hours: 108857 h Hours: 41979 h Work table length: 1080 mm Work table width: 580 mm Maximum table load (even): 1000 kg Maximum spindle speed: 8000 1/min X-axis travel: 1016 mm Y-axis travel: 610 mm Travel Z axis: 1032 mm Workpiece spindle drive power: 11 kW Machine height: 2950 mm Machine length: 3280 mm Machine width: 2260 mm Machine weight: 6200 kg

x-travel: 1016 mmy-travel: 610 mmz-travel: 760 mmControl: Heidenhain iTNC 530 total power requirement: kWweight of the machine ca.: 9,4 tdimensions of the machine ca.: mHeidenhain iTNC 530 CNC controlTravel ranges:X-axis 1.016 mmY-axis 610 mmZ-axis 760 mmSpindle speed 10.000 rpmTool holder HSK 80Power 12 kWTable clamping surface 1.250 x 590 mmTable load 900 kgFeed rate 40.000 mm/min.Machine weight 9.400 kgEquipment:Heidenhain iTNC 530 CNC contouring controlElectronic handwheel3D touch probetool changer2-position pallet tableCoolant system with internal coolant supply (ICS)Chip conveyorOil mist extraction systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 500 mm, 450 mm

Manufacturer: Mikron Model UME 600 TNC 360/4xx Year 1996 Condition Used Stock number 9378 Maximum vertical spindle speed: 5000 1/min X-axis travel: 600 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Machine height: 2000 mm Machine length: 2200 mm Machine width: 2800 mm Machine weight: 3550 kg

CONTROLS  CNC continuous-path control 3D MILLPLUS IT V600 WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 500 mm  Y-axis travel: 450 mm  Z-axis travel: 400 mmTABLE  table surface (left-right): 700 mm  table surface (front-back): 500 mm  workpiece load (max): 500 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 10000 /min  tool fixture: ISO SK 40   drive power: 13 kWAXIS DRIVES  traverse velocity X (max): 24000 mm/min  traverse velocity Y (max): 24000 mm/min  traverse velocity Z (max): 24000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour positions: 130 mm  tool length max.: 300 mm  tool weight max.: 6 kg  tool changing time: 8 sATTACHMENTS  European CE standards: yes No cooling system; the machine is connected to a central c ...

Key data: 1270 mm, 610 mm, 720 mm

Manufacturer: MAS Model MCV 1270 POWER Year 2018 Condition Used Stock number 9375 Control system: HEIDENHAIN TNC 640 Switch-on hours: 20815 h Hours: 7638 h Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Cone: ISO 50 Number of all tools: 40 pieces Machine height: 3330 mm Machine length: 5000 mm Machine width: 4165 mm Machine weight: 12200 kg

CONTROLS  CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 600 mm  Y-axis travel: 560 mm  Z-axis travel: 510 mmTABLE  table surface (left-right): 900 mm  table surface (front-back): 560 mm  workpiece load (max): 600 kgSPINDLE / HEAD  spindle revolutions (min): 20 /min  spindle revolutions (max): 12000 /min  tool fixture: ISO SK 40   drive power S6 40%: 13 kW  drive power S1 100%: 9 kW  spindle torque S6 40%: 82 Nm  spindle torque S1 100%: 54 NmAXIS DRIVES  traverse velocity X (max): 20000 mm/min  traverse velocity Y (max): 20000 mm/min  traverse velocity Z (max): 20000 mm/min  rapid traverse X: 30000 mm/min  rapid traverse Y: 30000 mm/min  rapid traverse Z: 30000 mm/minTOOL MAGAZINE  number of positions: 30   tool diameter max.: 80 mm  - with free neighbour position ...

The machine is in good technical condition; testing is possible by prior arrangement. It includes equipment and, where applicable, accessories (holders, tools, etc.). Complete, verifiable service history.

USED SERRTECH M1 VERTICAL MACHINING CENTERSerial No.: M1.005.06Year: 2006TableTable dimensions: 1200 x 600 mmSpindle Spindlespeed: 12,000 RPMSpindle taper: LV 40AxesAxis stroke: X=1000 - Y=600 - Z=640 mmToolmagazine Tool changer: 30 toolsFootprintMachine dimensions: 4450 x 2770 x H2450 mmMachine weight: 9,000 kgEquipped with1 FANUC 18i-MBNC 1 HP pump 1 ChipconveyorDimensions and weight5000x2750xH2790mm - 1 pallet weight 9000 kg Auction-ID: A1-50950-69

The machine is in good technical condition; it can be tested by prior arrangement.

x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmTable dimensions: 1300 x 600 mmtable load: 1,0 ttool taper: ISO 40 DIN 69871Aspindle turning speed range: 60 - 12000 U/minrapid traverse: 32 m/minpower capacity: 10 / 17 kWno. of tools in the magazine: 32 Stücktool length - max.: 300 mmTool diameter: 76 / 127 mmweight of tools max.: 8 kgtool changing time: 2,5 sectotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmInfrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer DMG Model DMC 100U duoBlock® Year 2007 CNC control HEIDENHAIN iTNC 530 Routes and advances Strokes (X/Y/Z) 1,000/1,000/1,000 mm. Fast forward axes (X/Y/Z) 60,000 mm./min. Max. working advance axes (X/Y/Z) 10,000 mm./min. NC rotary table Pallet changer for 2 pallets INCLUDED 2 Pallets INCLUDED Quick change system INCLUDED Pallet dimensions 1,000x800mm Maximum weight on pallet changer 1500 kg Table rotation (C-axis) 0.001º (Continuous) Table rotation speed 10.3 r.p.m. Head Horizontal Automatic Swivel Head / Vertical (A-axis) 0.001º (continuous) Head Cone HSK 63 Main Motor Power 26.9 kW Engine revolutions 24,000 rpm Automatic Tool Loader Type Loader Tools Horizontal Chain Tool warehouse positions. 120 Additional equipment Internal Cooling 80 Bar INCLUDED Compact cooling system INCLUDED Coolant tank with paper filer INCLUDED Chip Evacuator IN ...

x-axis: 2200 mmy-axis: 1700 mmz-axis: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control: WinMaxTravel ranges:X/Y/Z: 2200 x 1700 x 750 mmSpindle speed: 12,000 rpmTool holder: SK 40 Big PlusDrive power: 18/26 kWTool changer: 40-stationTable clamping surface: 2100 x 1600 mmDistance from spindle nose to table: 150 – 900 mmEquipment/Accessories:Workpiece positioning detection and tool length calibration via probeDirect measuring system (X/Y/Z axes)Production package for high-performance chip removalInternal coolant supply (ICS) 20 barChip conveyorCoolant system (1050 liters) with belt filter unitCoolant spray gunChip splash guard enclosureMachine status signal lightLED machine lightSet of machine leveling padsParts list and circuit diagrams on CDProgramming and maintenance manuals via control help functionThe data for this ad was cre ...