sheet metal working used for sale (3,314)

Key data: 3100 mm, 16 mm

- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg

Key data: 4 mm

Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at

Key data: 100 t, 3440 mm, 3550 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

Key data: 3020 mm, 6 mm, 750 mm

Combined CNC – controlled press brake / sheet metal shears Super compact machine with a very small footprint. Maximum cutting length 3,020 mm Nominal cutting capacity 6 mm sheet steel/ST 40 Cutting angle 1°30" 17 pieces of sheet metal hold-down, Ø hold-down plate 50 mm NC – controlled back gauge for guillotine shear station - adjustment range 750 mm Table height 750 mm. Maximum bending length between the side stands: 3,440 mm (column passage 3,550 mm) Maximum pressing force 1,000 kN Working height bending only 1,230 mm Lifting range bending station 170 mm Maximum installation height of the bending station is 250 mm (press beam surface in the lowest position), the backgauge adjustment range for the bending station is 750 mm. Dimensions including operating pendulum 4.25 m x 1.82 m x H 2.8 m Footprint 3.85 x 1.82 m Drive power 10 kW Weight 9,000 kg Equipment: ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Key data: 630 mm

Manual Tin Shears / Guillotine Shears with Table - Heavy-duty design - Adjustable front stop 360 mm - with table and runway Specification - Max. cutting length: 630 mm - Table dimensions WxD: 630 x 540 mm - Front stop: 360 mm - Dimensions WxHxD: approx. 1000 x 1200 x 2000 mm - Weight: approx. 300 kg

Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke

Nibbel, stamping and forming center with C frame (C – Frame stress-free annealed before mechanical processing – 15-year warranty on freedom from cracking) All with one machine: Nibbling – Stamping – Forming – Embossing – Tapping – Marking – Deburring Servo-electric punch head drive - up to 950 strokes per minute, adjustable depending on the material feed speed. Maximum punching force 300 kN Maximum sheet thickness 6.5 mm Largest workpiece weight 200 kg Machining area 1,500 mm x 4,000 mm (with repositioning up to 8,000 mm) Punching head with FANUC® drive - Programmable: - Punching stroke - Punching depth - Punching speed and - Stamping tool acceleration Tool magazine for 15 pieces up to optionally 150 pieces indexable tools Indexing accuracy 0.01° On request, the machine can be supplied with a TRUMPF® tool system Patented vertical tool magazine ...

High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm  ...

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydrau ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydrau ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydrau ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets wi ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets wi ...

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg

Robust, high-quality heavy beading and flanging machine with electric motor drive, electromotor bending roller delivery and electromotor displacement of the stop plate Largest sheet thickness that can be reshaped – 6 mm steel sheet/ST40, maximum extension 500 mm, maximum distance between the top and lower roller 48 mm, two working speeds 3 and 27 rpm – available at an additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 3 kW + 0.75 kW, weight 1.150 kg

Robust, high-quality beading and flanging machine with electromotor drive, hydraulic bending roller delivery and manual displacement of the stop plate Largest sheet thickness, which can be reshaped – 1.8 mm steel sheet/ST40, maximum extension 200 mm, maximum distance between the top and lower roller 30 mm, two working speeds 4 and 24 rpm – available at additional cost with infinitely adjustable working speed and frequency converter, time relay for limiting the working cycle, drive power 1.5 kW + 0.75 kW, weight 210 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

Mechanical manual sheet metal shears of excellent quality, for the burr-free precision cutting of fine sheets up to 1 mm sheet thickness steel sheet/ST40 – aluminium 1.2 mm, backdrop-guided knife beam, maximum cutting length 3,080 mm, cutting angle 1.5°, manually operated rear stop with 750 mm travel range - +/- 5 mm slantable for conical cutting, optional with sheet metal high-holding device and automatic tipping device for the sheet metal cuttings in the section collection trolley, scissor table height 800 mm - scissor table width 300 mm - scissor table support width up to 480 mm, dimensions 3.55 m x 1.6 m x H 1.3 m, weight approx. 790 kg

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

Mechanical sheet metal shears of excellent quality, for the burr-free precision cutting of sheet metal up to 1.2 mm sheet thickness steel sheet/ST40 – aluminium 1.5 mm, backdrop-guided knife beam Largest cutting length 4,080 mm, cutting angle 1.5° - up to 25 cutting strokes/min, NC - controlled rear stop with 750 mm travel range, slantable for conical cuttings - automatic removal of the stop rail at sections deeper than 750 mm - with forced-controlled sheet lifting device - automatic tipping device for the sheet metal cuttings into the section collection cart, Scissor table height 800 mm - scissor table width 300 mm - Scissor table extension up to 480 mm support width, dimensions 4.75 m x 1.68 m x H 1.46 m, drive power 2.2 kW, weight approx. 1,500 kg

For the production of snap folds and Pittsburgh folds, we supply folding forming machines, which produce a folded workpiece from a wide variety of sheet metal materials using a rollforming process from a flat sheet metal strip. Frm Rolling machine for the production of snaplock folds (snap folds) and S- or L-shaped folds up to 32 mm output length – as well as Pittsburgh folds with 13 mm folding height, Material thicknesses that can be rolled-reshaped - steel + aluminium 0.6 mm to 1 mm - stainless steel 0.6 to 0.7 mm, forming stations 9 pieces - throughflow speed 15 m/min, e-instances per meter 20 pieces - punch ingesrant distance 50 mm, dimensions approx. 2.3 x 0.7 m x H 1.1 m, drive power 3 kW, weight 450 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg

Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg