sheet metal working used for sale (3,310)

FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...

FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...

FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller  ...

BODOR P3015 fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. Distinguished by its use of the most advanced technology available on the market, the machine is the perfect choice for even the most intensive challenges. It enables the precise machining of sheet metal with a maximum length of 3000 mm and a width of 1500 mm by means of a stable 2 kW fibre optic beam. During the machining process, the cutting head with autofocus automatically adjusts the focal position depending on the thickness of the material. The nozzles, in turn, are automatically changed, calibrated and cleaned to ensure reliable operation throughout their service life. All this is completed by the 360° anti-collision system developed by BODOR, which predicts and detects any obstacles. The BODOR P 3015 fibre laser is also extremely easy to operate. The machine operator has an advanced nume ...

BODOR T230 tube and profile fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. The machine, which is distinguished by its use of the state-of-the-art technology available on the market, is the best choice for even the most demanding tasks in many industries. It enables precise cutting of tubes and profiles with a square cross-section by means of a stable 1 kW fibre-optic beam. During the machining process, the cutting head with auto focus function stores the focal length values in the control system separately for each type of material. The intelligent technology developed by BODOR, in turn, reduces the piercing time by 90%, regardless of the thickness and type of material. All these solutions reduce energy consumption and the amount of cutting gas to a minimum. The T230 tube laser cutting machine is also extremely easy to operate. The machine operator has an a ...

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...

SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine  ...

AMOB MAH 40/3 CNC 3-roll bending machine was built in 2021 in Portugal by AMOB Group. The machine, designed for bending tubes and profiles, ensures the highest precision and repeatability of the produced parts. The machining process is performed by three hardened rollers, of which the upper roller has hydraulic adjustment. Each of these is driven by a reliable, high-power motor, which is located inside a fully welded body. This solution enables bending of even the most complex shapes both vertically and horizontally. All this is complemented by an advanced CNC control with memory for numerous programmes. The MAH 40/3 CNC tube and profile bending machine weighs 540 kg. Technical specifications of the AMOB MAH 40/3 CNC bending machine - control panel with CNC control - number of rollers: 3 - roller diameter: 148 mm - roller rotational speed: 12 rpm - number of shafts: 2 - shaft di ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for precision cutting of sheet metal with a maximum thickness of 50 mm. The machining process is performed by a reliable plasma torch, which is powered by a CEBORA plasma source of the highest energy efficiency. Depending on the material type, high quality gas mixtures, i.e. oxygen, air, nitrogen and argon, are used in the cutting process. All this is complemented by an intuitive CNC control in which even the most advanced machining programmes are created in just a few steps. All this makes the offered STIGAL plasma cutting machine an excellent choice for both small businesses as well as large industrial plants. The total weight of the machine is approximately 2000 kg. Technical specifications of the STIGAL DYNAMIC SPEED HQ plasma cutting machine - operator panel ...

DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...

STROJARNE PIESOK NTC 2500/4 guillotine shears were built in 1985 in Czechoslovakia. The machine, distinguished by its extremely sturdy design, is used for cutting sheet metal with a maximum thickness of 4 mm. The machining process is performed by high-quality cutting blades with an electrically adjustable gap between the blades. The NTC 2500/4 guillotine shears weighs approximately 3800 kg. Technical specifications of the STROJARNE PIESOK NTC 2500/4 guillotine shears - maximum sheet metal thickness (Rm=450 MPa): 4 mm - minimum sheet metal thickness: 0.6 mm - maximum sheet metal length: 2500 mm - cutting angle: 1°33′ - reach: 200 mm - back stop stroke: 4-750 mm - back stop drive: electric - back stop motor power: 0,25 kW - main motor power: 4 kW - installed power: 6.5 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3100 x 1600 x 1500 mm - weight of the mac ...

AMADA VIPROS 2510 KING CNC punching machine was built in 1998 in Japan by AMADA CO., LTD. The machine, distinguished by its extensive machining capabilities, is an excellent choice for the production of precise parts with the highest quality. It is capable of punching holes in sheet metal made of, among others stainless steel and aluminium, with a maximum thickness of 6.4 mm. The machining process is performed on a large brush table, which prevents scratches and scrapes on the sheet surface, and also significantly reduces noise level. All this is completed by an intelligent FANUC CNC control in which the most advanced machining programmes are created in just a few steps. The AMADA VIPROS 2510K punching machine weighs 11000 kg. Technical specifications of the AMADA VIPROS 2510 KING punching machine - CNC control: FANUC Series 18-P - maximum press force: 20 t (196 kN) - feed in the X ...

AMADA EUROPE 255 CNC punching machine was built in 2004 in France by AMADA EUROPE S.A.. The machine, designed for machining thin sheet metal of a maximum thickness of 3 mm, is distinguished by its high efficiency and reliability. In order to obtain the highest precision of the produced parts, all the machining processes are performed on a large brush table. This table, thanks to its design, prevents scratches and nicks on the sheet metal during the material feed, and also significantly reduces the noise level. The EUROPE 255 punching machine is also offered with extensive equipment, including e.g. a cooling unit, light curtains and an advanced GE FANUC CNC control. The total weight of the machine is 11000 kg. Technical specifications of the AMADA EUROPE 255 punching machine - maximum press force: 20 t (200 kN) - feed in the X/Y axis: 1280/1320 mm - feed rate in the X,Y axis: 82 m/m ...

Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...

ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...

ERMAK GMR 2600 X 4 mechanical guillotine shears were built in 2007 in Turkey by ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. The machining process is performed by high alloy steel cutting knives with adjustable gap between blades. Automatic hold-down system, in turn, prevent the sheet metal from sliding during machining, ensuring uninterrupted production of repeatable parts. Moreover, the operator’s daily work is facilitated by the convenient foot switch control and the intuitive NC control, which allows the creation of machining programmes in just a few steps. The GMR 2600 X 4 guillotine shears weighs 3750 kg. Technical specifications of the ERMAK GMR 2600 X 4 guillotine shears - NC control - maximum workpiece length: 2600 mm - maximum workpiec ...

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A. The offered machine, apart from passing the start-up tests, has not worked in production and is like new. The ADIRA BB3515 CNC press brake is the perfect choice for precision machining of workpieces with a maximum length of 1500 mm. The machine is distinguished by the use of many state-of-the-art technical solutions, thanks to which it will meet all, even the most intensive challenges of modern business. The powerful electric drive developed in Bluedrive technology, is free of any filters, seals and hydraulic oil compared to a standard hydraulic system. This solution makes the machine much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its  ...

BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...

INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

Used vacuum coating machine - vacuum metalizer. PVD vacuum coating system Manufacturer: KOLZER Year of production: 2019 Chamber dimensions: Inner diameter - 1000mm. Centrifugal pump for swinging pistons: Motor power - 5.5kW Roots cam centrifugal pump - 2000m3/h, Motor power - 5.5kW 2 five-stage diffusion pumps "KOLZER" with a capacity of each - 5000 l/sec, Heating power of each - 4kW, Warm-up time - 30min, Water consumption - 8 l/min, Silicone fluid 702 cad. - 1.5L, PVD source: 100x120mm PVD generator power: DC20 kW Plasma systems: ACMF and PECVD Automation system: Industry 4.0 Ready Total installed power: 44.75 kW Power supply: 400V Air pressure: Max 6bar Weight 3000kg Dimensions: 2560x1700x2200mm