other metal working machines used for sale (10,792)

Weight: 1,5 tserial number: 4193 : ja vice: ja x-travel: 500 mmlength: 1200 mmwidth: 1300 mmheight: 1789 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: - mmworking heigth: - mm: - serial number: 2044 total power requirement: - kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 240 kg: max 50 mm : ja serial number: 2035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

balancing body min/max.: 30 - 5000 kgbalancing body diameter with machining unit: 2100 distance of bearings: kleinster 240 mmdia. axle journal: 35 - 180 mmweight of the machine ca.: 400 KGThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 Vbattery: 24V / 200Ah Brush diameter: 510 mmtank capacity: 50 / 50 Literweight: 90 kgrange L-W-H: 1,0 x 0,6 x 1,0 mmRTE Floor Cleaning Machine:- with drive system- battery charger- working capacity 2000 m²/h- suction width: 850 mm- cleaning width: 510 mm- fresh/wastewater tank volume: 55/60 LThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKDimensions (HxWxD): 280 x 190 x 190 mmdiameter: 60 mm-> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8°-> Module 16 F.20° 1gg Lks-> BP IV D-Stg < 5°40-> 5° 40 Sp Stg 00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKDimensions (HxWxD): 300 x 190 x 190 mmdiameter: 60 mm-> Gear hobbing cutter with HSS cutting material-> Module 18-> L1-> 5° 48`The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKDimensions (HxWxD): 300 x 190 x 190 mmdiameter: 60 mm-> Gear hobbing cutter with HSS cutting material-> Module 18 20°1 gg Lks.-> HSS-C 70.251VFThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKDimensions (HxWxD): 280 x 190 x 190 mmdiameter: 60 mmHSS hob for high wear resistanceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STKDimensions (HxWxD): 300 x 190 x 190 mmdiameter: 60 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis cnc machining center Type: UMC-750 Manufacturer: Haas Year: 2022 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine 30+1 positions Spindel taper: ISO 40 The distance between the tip of the spindle and the table (~ max) 610 mm Distance between spindle tip and table (~ min) 102 mm Maximum weight on the table (evenly distributed) 300 kg 25 micron filter Chip conveyor Spindle center cooling pressure 300 psi Wireless tool and workpiece probe Synchronized threading Rotating measuring ruler Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are going to replace the table support for positioning the metal sheets with a new one made of 1 mm sheet metal. Otherwise, the system underwent a general overhaul (mechanical and electrical) in 2020. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer:Keyence Model: IM6025 Year of Manufacture: 2016 Find more here - .ucymachines/ Contact us at - sales@ucymachines

workpiece weight: - kgworkpiece length: - mmdiameter: - mmdocumentation: vorhanden dimensions of the machine ca.: 4,10 × 1,20 × 1,40 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Type: TMM8i Manufacturer: Hurco Year: 2018 Control: Hurco WinMax 5 X: 198 mm Z: 508 mm Max turning diameter: 256 mm Swing over bed: 525 mm Swing over cross slide: 300 mm Max spindle speed: 4 800 rpm Spindle power: 13.2 kW Spindle nose: A2-6 Bar capacity: 50–52 mm 12-station servo driven turret Tool standard: VDI 30 (bi-directional indexing) Live tooling options available for milling/drilling operations Driven tools Tool probe Tailstock Chip conveyor Bar feeder: Samsys Multi 3000 Machine in good condition, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

length: 560 mmwidth: 730 mmheight: 1150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

enlargement: 10-100x diameter: 200 x 150 mmweight of the machine ca.: 0.15 tdimensions of the machine ca.: 0.4 x 0.5 x 0.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 6 St.: 70/100 kg: ca. 820 x 740x 560 mmweight: ca.110 kgdrawer measurements: 450 x 600 mmColour: 7035/5012 RALThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: ca. 1500 mmwidth: ca. 700 mmheight over floor: ca. 840 mm: 2 St.With 2 drawers, interior height approx. 140 mmand 2 storage compartments, door height approx. 380 mmMobile on casters, casters can be lowered so that the table remains stable when workingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: POS Model: POSmill E1100 Year of Manufacture: 2015 Axis Travel - X-axis: 1,100 mm - Y-axis: 600 mm - Z-axis: 510 mm Control System - Control: Heidenhain iTNC 625 Tool Changer - Automatic tool changer: 40-position Electrical Data - Rated power: 300 kVA - Voltage (3-phase): 400V / 50 Hz - Fuse: 250 A Machine Weight - Net weight: 8,800 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 550 mmy-travel: 400 mmz-travel: 360 mmb-axis: +/- 110 °c-axis: 360 ° 0Control: HEIDENHAIN iTNC 530 spindle taper: HSK63 spindle turning speed - stepless: 20000 U/mintools in tool magazin: 48 weight of the machine ca.: 10 tdimensions of the machine ca.: 3 x 5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1200 mmwidth: 800 mmweight of the machine ca.: 0.55 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1600 mmwidth: 1400 mmweight of the machine ca.: 2.1 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1300 mmwidth: 1100 mmweight of the machine ca.: 1.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

his Mazak VCN 510C is a vertical machining center manufactured in 2003, designed for precision 3-axis machining operations. It features a robust construction with a machine weight of approximately 6000 kg, ensuring stability during high-speed machining. Technical data Travel distances: X 1050 mm / Y 500 mm / Z 500 mm Spindle: 12,000 min⁻¹, SK40 Tool magazine: 30 positions Control: Fusion Table size: approx. 1300 × 550 mm Cooling: 15 bar IK Machine weight: approx. 6,000 kg Machine is in daily use, ready for immediate operation Chip conveyor IKZ Documentation available Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Mazak HCN 4000 is a high-performance Horizontal Machining Center (HMC).In the world of CNC machining, the HCN (Horizontal Center Nexus) series is Mazak’s workhorse for high-speed, high-precision production Technical data: Travel distances: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm Table: Pallet size: 400 x 400 mm Number of pallets: 2 Indexing: 1° increments Spindle: Spindle mount: SK-40 Max. speed: 18,000 rpm Power: 35 kW Tool magazine: Capacity: 60 tools Equipment: Control: Mazatrol SmoothG Tool length measurement Cooling through the spindle at 32 bar Niagara flushing Air through the spindle Renishaw OMP 60 probe Renishaw Inspection + (version 2022) Tool ID system Chip conveyor Additional filter cartridges Thread cutting without compensation chuck G00 tilt function CE marking Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Rösler Model: RBD 600-2/4 Year of Manufacture: 2007 Technical Data Connection Values / Power Requirements - Supply Voltage: 3 x 400 V - Compressed Air Quality: Cleaned, dried, oil-free, filtered, filter 40 um, residual moisture at 20 C less than 30% - Ambient Temperature / Humidity: +5 C to +40 C, per DIN 40040 G (annual average less than 65%, within 60 days less than 85%) - Blast Media Fill Quantity (kg): approx. 1500 - Required Dust Extraction Capacity (m3/h): 5600 Dimensions / Weights - Length (mm): 12400 - Width (mm): 3800 - Height (mm): 2300 - Weight of Heaviest Single Component (kg): 6000 Find more here - .ucymachines/ Contact us at - sales@ucymachines

5-axis two-spindle center with pseudo-palletization Type: DZ 24 Magnum Manufacturer: Chiron Year: 2015 Hours: 57000 Control: Siemens Sinumerik 840 D Table clamping surface 2X D 500 mm X: 830 mm Y: 630 mm Z: 630 mm A: rotating drum C: rotary tables Spindle speed: 0 - 20000 rpm Number of controlled axes: 5 No central cooling Spindle clamping cone: HSK-A63 Tool magazine: 2 x 30 positions Machine weight: 18500 kg Dimensions: 7000 x 3200 x 3500 mm BLUM aiming laser probe Chip conveyor Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: DONAU Model: DR 50 Find more here - .ucymachines/ Contact us at - sales@ucymachines