other metal working machines used for sale (10,729)

SCHNELL SHEAR LINE 300 rebar cutting and bending line was built in 2008 in Italy by Schnell S.p.a. The electrical installation was overhauled in 2024. The SCHNELL SHEAR LINE 300 is a reliable system designed for serial machining of rebar with a maximum diameter of 50 mm. It integrates all the necessary equipment that is responsible for cutting, bending, optimising, storing and handling bars. The entire production cycle, from feeding to the collection of the finished parts, is performed fully automatically. The SCHNELL SL 300 stirrup production machine is fully complete and consists of the following components: – control console – FA/6/14 storage rack for steel – SCHNELL CGS 300 HDY guillotine shears – SCHNELL VBM 12/2 measuring and cutting track with single-sided unloading – SCHNELL ROBOMASTER 45 automatic rebar bending machine – rebar storage and retrieval system ...

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Industrial polishing machines Hau and Metabo For sale are polishing machines from HAU and Metabo Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 See photos and installation plan plus accessories/spare parts (a.a. polishing paste feeder) together 4.5 - 5.3 tons. These have been standing unused since 2019 in 58-100 Świdnica in Lower Silesia in today's Poland. Until 2019, these were used in ongoing production in the Munich area and then brought to Poland to continue working with them there. However, the project in Poland was never implemented. Pricing: FOT 58-100 Świdnica, Poland, lashed to pallets. Viewing by arrangement. The photos are still from the original location in Munich. More photos on request

Hardening furnace G+H

Serial Number: 075388 Year of Make: 2007 X 800mm Y 1000mm Z 700mm Measuring head SP80

Pero Washing Machine 2600/016GR.2W-4667

Key data: 18

Machine name: Rotary Transfer Machine Pfiffner HB45 - 18 Hour Manufacturer: Pfiffner Machine number: HB45 Year of construction: 2006 Condition: used Functionality: Fully functional

Machine name: 3D Printer Manufacturer: DMG MORI Model: Lasertec 30 SLM Year of construction: 2018 Condition: as good as new (used)

IBG P/N11278-S/N 101 3.1. Physical Specifications Dimensions (L x W x H): approx. 0.85 m x 0.52 m x 0.55 m Weight: approx. 60 kg (of which 5 kg for the eddyliner®) 3.2. Power supply Mains voltage: 230 V, Frequency: 50 Hz, Power consumption: 300 VA, Pre-fuse (max.): 16 A, Power supply: IEC C13 plug according to IEC 60320 3.3. Operating conditions Ambient temperature: 15 °C to 40 °C, Humidity: max. 80% RH (non-condensing), Operating altitude: max. 2000 m Environmental conditions: Clean, oil- and dirt-free environment 3.4. Component Specifications Shaft geometry: Diameter Ø10 mm – Ø15 mm (without cone or groove), Length 80 mm – 150 mm Specified component types (at the time of receipt and delivery): Ø10 mm and Ø12 mm () --

Broaching machine Karl Klink Technical data can be found in the photo

NOVICK AF1300 die-sinking EDM was built in 2012 in China by Novick Digital Equipment Co., Ltd. The machine is used to produce parts with complex geometries that have applications in, among others, aviation and aerospace industries. The machining process is performed by means of electrical erosion, which minimises or completely eliminates the need for other secondary processes, such as polishing. The combination of a full closed-loop control system and dual feedback compression, in turn, guarantees exceptional machining accuracy in even the most demanding applications. The NOVICK AF 1300 sinker EDM weighs 2300 kg. Technical specifications of the NOVICK AF 1300 die-sinking EDM - feed in the X/Y/Z axis: 520/300/300 mm - work table dimensions (L x W): 600 x 400 mm - generator: NOVICK 560F - power: 10 kVA - power supply: 3x 380 V; 50/60 Hz - weight of the NOVICK AF1300 machine: 2300  ...

LS6/4 knotted mesh production machine was built in 2006 in Poland by Maszyny S.C. The machine enables the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. Technical specifications of the LS6/4 fixed knot fence production line - type of produced net: L, M, S, SL - maximum height of the produced net: 200 cm - vertical wires spacing: 15 or 30 cm - number of horizontal wires: 25 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa

LS8 2500 knotted mesh production machine was built in 2016 in Poland by Maszyny S.C. The machine is used in the efficient production of durable and damage-resistant L-, M-, S- and SL-type mesh. The entire production process, from wire feeding to net braiding, is performed fully automatically. The fixed knot fence production line weighs 2600 kg. Technical specifications of the LS8 2500 knotted mesh production machine - type of produced net : L, M, S, SL - maximum height of the produced net: 225 cm - horizontal wires spacing: 15 or 30 cm - number of horizontal wires: 26 pcs. - edge wires diameter range: 1.8-3 mm - inner wires diameter range: 1.5-2.5 mm - edge wires maximum stress: Rm=1200 MPa - horizontal wires maximum stress: Rm=450 or 1150-1200 MPa - vertical wires maximum stress: Rm=450-500 MPa - power: 11 kW - pneumatic pressure: 0.6 MPa - power supply: 3x 400 V; 50 Hz  ...

HEXAGON ROMER ABSOLUTE ARM RA-7525-3 coordinate measuring arm was built in 2014 in France by Hexagon Metrology. The device is used for the precise 3D measurement of complex parts, which are usually inspected on complex metrology devices. The process, thanks to the use of absolute encoders, is performed immediately. Simply switch on the arm and start measuring. What’s more, the universal mount allows the change of measuring probes at any time, without the need to recalibrate. The Zero G counterbalance minimises torque in the base of the device, increasing freedom in mounting options, i.e. lightweight tripods, magnetic and vacuum bases. This solution, combined with immediate acoustic and haptic feedback to the operator, allows the machine to be used in even the most demanding industrial environments. When the HEXAGON portable measuring arm is not in use, it can be locked safely in the ...

MACRI ITALIA PROVAR 6-45 U-D tube and profile bending machine was built in 2015 in Italy by Macri Italia srl. The machine, designed for precision bending of tubes and profiles with a maximum diameter of 45 mm, is an answer to the daily challenges of modern business. The machining process is performed by means of a moving head with reinforced gears, which allows the bending of standard and variable radiuses in 6 axes (X,Y,Z,B1,B2,A). Each axis, in turn, is driven by brushless servomotors, which ensure the achievement of high dynamics, combined with excellent positioning accuracy. The machine’s extensive range of equipment includes e.g. state-of-the-art MACRI software with many useful functions and the ability to run a anti-collision test with 3D simulation. The PROVAR 6-45 U-D mandrel bending machine weighs 4000 kg. Technical specifications of the MACRI ITALIA PROVAR 6-45 U-D tube be ...

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm

GALACTIC GAVA 500 CAPVD PVD sputtering machine was built in 2022 in Poland. This extremely technically advanced system is designed to coat, among others, cutting tools, moulds and punches with super-durable coatings with high resistance to abrasion and chemical agents. The CAPVD (Cathodic Arc Physical Vapour Deposition) method used, compared to standard PVD methods, allows highly dense and adherent coatings to be produced with good deposition rates and thicknesses (± 5 nm). In the process, atoms from a source (cathode) placed in the working chamber are vaporised using an electric arc. These atoms then transfer and deposit onto the surface of the workpieces, creating a thin coating. The GAVA 500 PVD sputtering machine is equipped with all the necessary components of the best technical specifications and meets the highest industry standards. Technical specifications of the GALACTIC  ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

MAX CAPASITY 63 T, DIAMETER ROLLING 110

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

SODICK AG40L die-sinking EDM was built in 2011. This highly efficient machine is used for precision electrical discharge machining of workpieces with a maximum weight of 550 kg, enabling complex shapes to be achieved in even the hardest materials. Furthermore, workpieces machined in this way do not require other secondary processes to be undertaken, such as polishing. The installed CNC control has a useful perfect active control” function for simultaneous control of high-speed electrical discharges and axis movements, using 1 Gbit/s serial communication technology. The SODICK AG40L LN2 sinker EDM is offered with extensive equipment, consisting of, among others, an EROWA measuring probe, a 4-position linear tool changer and tooling. The total weight of the machine is 3900 kg. Technical specifications of the SODICK AG40L die-sinking EDM - feed in X/Y/Z axis: 400/300/270 mm - work ta ...

3DYY 9-12PLC rotary transfer machine manufactured in 2020 in China by Zhejiang Mingwen Machine Tool Co., Ltd is designed for high-volume production of e.g. sanitary, gas and hydraulic fittings. The machine, which combines the features of several metal-working machines, performs sequential machining operations on parts placed in special holders, i.e. milling, threading and drilling, in just one working cycle. The finished parts, i.e. fittings, couplings and extensions, are distinguished by their high quality. In this way, the 3DYY9-12PLC transfer machine generates considerable savings, as well as ensuring production efficiency, thanks to its speed and flexibility. The multi-spindle machining center has so far been used to machine 1/2″ internal and external threads from fi 24 x 6k14 brass rod. It took less than 4 seconds to produce 1 external thread. The total weight of the machine is ...

Robot Laser Welding and Cutting Cell / Laser cutting and welding cell Year of manufacture 2018 Wenige Arbeitsstunden / not many working hours Robot Fanuc M-710iC/70 Control CNC: Fanuc R-30iB) + MFP Payload / lifting max: 70 kg Repeatability: ± 0.04 mm Working range: 2050 mm IP54 Fiberlaser source: IPG Photonics Model YLS-4000-S2T-Y16 Power: 4kW Cooling system. Two outputs optical and permanent connections of welding and welding Laser Cutting Heads / Two outputs optical and permanent connections of welding and laser cutting heads. Source dimensions: 856 x 806 x 1206 mm; Weight / weight: 330 kg; Power supply: 400–460 V/3P + PE at 50–60 Hz; Operating current at: 4000 W and 400 VAC: 20 A Laserschneidekopf / laser cutting head: HIGHYAG BIMO-FSC Laserschweißkopf / laser welding head: IPG Photonics. FLWO-D30 Vertical Welding: Fronius 7000 Doppe ...

KUKA KR30-3 industrial robot was built in 2015. This compact machine with a robust design is the perfect solution for many applications such as handling, milling or welding workpieces where short cycle times and high accuracy are required. The increased arm’s range of movement allows free operation in all positions, even in hard-to-reach places. In addition, in order to achieve excellent dynamic movements combined with high process reliability, each of the 6 axes is driven by a powerful servo motor. The KUKA industrial robot designed in this way optimises even the most intensive production processes, while maintaining the highest productivity. The KUKA KR 30-3 robot arm was used sporadically and worked a small number of hours. Its task was the operation of injection moulds (picking up, handling and depositing previously prepared cores). The KR 30-3 6-axis robot weighs 665 kg. Tec ...

KOLZER DGK36″ PVD sputtering machine was built in 2017. This specially constructed machine is used in the vacuum coating process, after which the workpieces are characterised by a metallic effect” with high resistance to abrasion and chemical agents, as well as innovative colours. The PVD sputtering process involves the expulsion of metal atoms from a target (evaporation material) placed in the working chamber, which are then transferred and deposited onto the surface of the workpieces. In this operation, the target is exposed to a technological vacuum, consisting of process gas and high voltage. At the end, the workpiece surfaces are cleaned and activated by the plasma installed in the machine. This solution offers virtually unlimited possibilities for coating any type of surface. In order to meet all demands and requirements, the KOLZER magnetron sputtering machine meets the hig ...

METRIS-NIKON MCA II 5124 measuring machine built in 2011 is a versatile device that can be used for measuring both small-sized objects as well as complex, large-sized parts. In addition, thanks to the computerisation of measurement procedures and its compact design, the machine can be used directly in the production environment or even inside the measured objects. The measurement process starts with an angular displacement of the arms to ‘pass’ through reference points. The operator then brings the machine’s measuring tip to the surface of the measured workpiece and validates the coordinates using a button located on the head. The coordinates are then transformed by the calculation procedures to the cartesian system (X,Y,Z), where they are used as the basis for determining the dimensions by approximation of the measured features and geometric figures, i.e. circles, cylinders and ...