other metal working machines used for sale (10,729)

Brand Sahinler Model: PK 35 Year of Make: 2024, Unused Capacity (Kw) 1.5 Voltage 400 Frequency (Hz) 50 Dimensions LxWxH (mm) 1000 x 750 x 1400 Weight (Kg) approx. 400 Quantity in stock 4 Made in Turkey Ø Diameter (mm) 50 Comments Unused machines for competitive prices, multiple units in stock, footpedal included

Key data: 450 mm, 320 mm, 162 mm

For sale Charmilles wire EDM machine type Robofil 4020.1. The machine is in very good condition. Still to be seen under power. Lots of accessories!

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

table length: 4100 mmtable width: 1050 mmtable height: 1600 mmtotal power requirement: 29 kWweight of the machine ca.: 28000 tdimensions of the machine ca.: 11X5X3,8 mMarke KiheungMaschinen-Nr F668Typ KNC-U1000CNC-Marke HeidenhainCNC-Typ TNC 426Baujahr 2002Tischlänge 4.100 mmTischbreite 1.050 mmMaximale Tischbelastung 8.000 kgX 3.600 mmY 1.250 mmZ 1.600 mmAufnahme BT50Schnell 10.000 m/minGeschwindigkeit 0 - 4.000 RPMBeweglicher Tisch Huron-Fräskopf CNC gesteuerter Fräskopf Späneförderer Maschinengröße (LxBxH) 11.000 x 5.000 x 3.800 mmMaschinengewicht 28000 kgMagazinplätze: 30Spindelantriebsmotor: 29 KwAusgestattet mit 4. Achse.Tischdurchmesser: 630 mm ØBelastung: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: mmturning length: mmswing diameter over bed slide: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand TakangMachine no D895Type TR1200x6000Year of make 2015Oil country LatheDistance between centers 6.000 mmCenter height 600 mmTurning diameter above the bed 1.200 mm øTurning diameter above the support 890 mm øPassage 150 mm øBed width 560 mmGlasses 400 & 550 mm4-Jaw Chuck 1.000 mm øDigital readout HeidenheinPower on the top supportRapid traverse along and transverse movement3 lane bedMachine size (lxwxh) 8.500 x 1.700 x 2.300 mmMachine weight 13.800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: - Cleansing load time: - internal dimension: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.

x-travel: 4300 mmy-travel: 1000 mmz-travel: 1050 mmtotal power requirement: kWweight of the machine ca.: 35 tdimensions of the machine ca.: mBrand: ANAYAKType: HVM-5000Build in : 1997CNC Control HEIDEHAIN, TNC 426Tablesize: 5000 x 1000 mmX= 4.300 mmY= 1.200 mmZ= 1.050 mmToolchanger for 40 toolsTools: BT 50CNC Controlled head 2,5 degreesCooling trough the spindleNumber of controlles axes: 4machineweight 35.000 kgMoveable columnThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 120 Amp. – 19 kVA X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Table dimensions: 1,100 x 700 mm Distance head - table: 950 mm (max) Oil retainer: 1,700 x 1,000 x 650 mm Workpiece weight: 4,000 kg (Max) Control: CNC Datic S120

turning diameter: 800 mmturning length: 4000 mmcontrol: cnc total power requirement: kWweight of the machine ca.: 7,3 tdimensions of the machine ca.: 6,6x2,2x2 mBrand: PhoenixType: FL 8040 CNC ITYear of make: 2001Distance between centers: 4.000 mmCentre height: 400 mmSwing over bed: 800 mm øSwing over support: 510 mm øSwing in the gap: 1.100 mm øSpindle boring: 250 mm øSteady rest: 350 mm ø3-Jaw chuck: 630 mm øMachine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mmMachine weight: 7.300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 8499 Omschrijving Projektor Fabrikaat Hilger Type TT 288.311 Serienummer 55211 Vergrotingen 10x, 15x, 25x, 50x en 100x

Code 6398 Umschreibung CNC Bahngesteuerte Drei-Koordinaten Messmaschine Fabrikat DEA Typ IOTA 1102 Maschine Nummer 514 Baujahr 1989 Steuerung DEA CU / 01 Tischabmessung L x H x B 1800 x 1000 x 700 mm Längs X = 915 mm Quer Y = 610 mm Vertikal Z = 610 mm Nutzbare Messvolumen 0.34 m3 Gewicht 2050 kg Bemerkungen Maschine hat KEINE Messkopf ( wie Renishaw ) Maschine ist ohne Computer

Code 111256 Description Hydraulic vertical Keyseatingmachine Make FRÖMAG Model RAPIDA D 63/425 Serial no: AKK 87370 ASK 1660 Year 1979 Capacity : 3 – 63 mm Stroke length: max. 445 mm Speed: 2 – 22 m/min max. weight on table: 30.000 kg Tabel size 685 x 455 mm Accessories Autom. Cycle Very much tooling Condition Good

table length: 0 mmtable width: 0 mmtable load: 0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine.

SPIRO BETA 3 elbow machine was built in 2018 in Switzerland by SPIRO International S.A. The machine is designed for the production of segmented elbows, duct reducers, duct end caps and other round-section fittings. It enables the forming of flanges, as well as the creation of lock seam along the edges of the segments and their permanent closing. This makes the SPIRO BETA 3 an excellent choice for manufacturing plants specialising in the production of components for the ventilation and air-conditioning industry. The process begins with the preparation of properly cut sheet metal segments. The machine precisely forms their edges, giving them the appropriate profile to enable subsequent connection. The formed edge is then closed by a set of rollers, creating a permanent lock seam. The circumference speed of the rollers can be adjusted within a range from 0 to 40 m/min, allowing the opera ...

AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine was built in 2008 in Switzerland by AGIE SA. The machine is designed for the production of precision dies, punching dies, punches and other elements with complex geometry using the electrical erosion. This technology enables the machining of workpieces made from difficult-to-machine and hardened materials, and also reduces or completely eliminates the need for further finishing operations, such as polishing. Electrical discharge machining is performed in a tank filled with a dielectric fluid, which affects the surface quality and dimensional accuracy of the machined workpieces. All process parameters are entered in an intuitive CNC controller, which facilitates the daily operation of the machine. The AGIE AGIETRON HYPERSPARK 2 HS sinker EDM is offered with tooling. The total weight of the EDM machine is 2800 kg. Technical specifica ...

PREWI measuring table was manufactured in Germany by PREWI Mess- und Steuerungstechnik GmbH. The device is designed for the precise dimensional inspection of larger workpieces in both industrial and laboratory conditions. The combination of precision guideways with a measuring system operating in three axes X, Y and Z ensures high repeatability of measurements. This solution allows for a measurement accuracy of ± 0,10 mm in the X and Y axes and ± 0,05 mm in the Z axis. The HEIDENHAIN ND 5023 digital readout, in turn, enable quick reading of values during measurements, facilitating the operation of the device. The PREWI measuring table is ideal for use in quality control departments, tool rooms and manufacturing plants, where it is used to verify dimensions and assess the conformity of workpieces with technological requirements. Technical specifications of the PREWI measuring table  ...

Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system

CHMER GX430L+ wire EDM was built in 2018 in Taiwan by CHING HUNG MACHINERY & ELECTRIC INDUSTRIAL CO., LTD. The machine is designed for the precision machining of workpieces using the electrical discharge machining. This technology enables the creation of complex shapes even in the hardest materials, whilst maintaining high dimensional accuracy and excellent surface quality. As a result, the wire EDM is ideal for the production of precision dies, cutting dies, punches and other parts that require high accuracy. The CHMER GX430L+ performs machining with a cutting head that moves in 5 axes. The X and Y axes are driven by linear motors, whilst the Z, U and V axes are equipped with precision servo drives and AC motors. This solution ensures smooth movement of the head, high positioning accuracy and stable operation even under intensive use. The automatic wire threading system reduces the t ...

ITF Coclea LC 5/4 rotary drum washer was built in 2006 in Italy by I.T.F. S.r.l. Impianti Trattamenti Finiture. The machine is designed to clean large quantities of very small metal parts that are contaminated with oils, greases, emulsions or other contaminants. Cleaning takes place inside a rotating drum, which ensures that the parts are constantly in motion. As a result, all surfaces of the parts are evenly exposed to the cleaning agent, enabling the effective removal of contaminants even from hard-to-reach places. The Coclea LC 5/4 rotary drum parts washer is used in manufacturing plants and wherever the rapid, effective and repeatable cleaning of large numbers of parts is essential. Technical specifications of the ITF Coclea LC 5/4 rotary drum washer - compressed air pressure: 6 bar - control voltage: 24 VAC - power supply of the ITF machine: 3x 400 V

LM 175 S solvent cleaning machine was built in 2000 in Italy by AMA UNIVERSAL. The machine is used for the effective removal of oil, grease and other contaminants from workpieces, machine parts and tools. Cleaning takes place inside a closed work chamber using perchloroethylene (PER). A basket with dimensions of 550 x 300 x 300 mm and a load capacity of 80 kg enables cleaning of a larger number of parts. Once the cycle is complete, the used solvent is fed into the filtration and distillation system, where it is cleaned and prepared for reuse. This solution reduces the consumption of the cleaning medium and helps to lower the machine’s operating costs. The LM 175 S is also equipped with an ultrasonic cleaning system with a power of 1200 W and a frequency of 23000 Hz. The use of ultrasonics helps to remove contaminants even from hard-to-reach surfaces, including holes, gaps and variou ...

MONTASTAMPI M30 die splitter was built in 2000 in Italy by ATTREZZERIA UNIVERSAL di Caramaschi Armando S.a.s. The machine is used to split and rotate stamping dies used in metal forming. It eliminates the need for manual handling, replacing traditional methods of spliting dies using cranes or other handling equipment. As a result, it is ideal for production facilities that use large-scale stamping tools. The MONTASTAMPI M30 enables the handling of large-sized and heavy stamping dies. The dies are attached to specially designed clamping systems, which ensure high stability during operation of the machine. The die rotation process is precisely controlled, which enhances ease of operation and ensures the safety of both the machine and the operator. The MONTASTAMPI die splitter weighs 6000 kg. Technical specifications of the MONTASTAMPI M30 die splitter - maximum load on the upper pla ...

SCHLEICHER WV-PL 160/800 coil feeding line was built in 1987 in Germany by H. Schleicher GmbH & Co. Maschinenfabrik. The line is used for the automatic feeding of material from a coil to presses and other machines used in metal forming. The automation of this process stage improves mass production, increases its efficiency and reduces the need for manual work. The SCHLEICHER WV-PL 160/800 coil feed line consists of a roller feeder, a straightening machine and a sheet metal decoiler. It is designed for coils with a maximum width of 800 mm and a weight of 200 kg. A 4 mm thick material strip is decoiled and straightened, then fed directly into the machine’s working area. The precisely adjustable feed rate ensures uniform strip feeding, which translates into process repeatability and stable operation of the entire line. All this makes the SCHLEICHER press feed line an excellent choice f ...

Automatic powder coating line was built in 2018. After a test launch, it has never been used. The powder coating line is designed for the automatic powder coating of metal components with a maximum length of 1500 mm and a width of 380 mm. It enables the performance of the entire technological process, from surface preparation, through the application of powder coating, to the final curing of the coating. The preparation of workpieces for coating takes place in a three-zone chemical section with immersion tanks. There, the elements are cleaned prior to the application of the coating. The process uses demineralised water, which ensures proper surface preparation and enhances coating adhesion and durability. Transportation of parts between successive stages is performed using a Power Free overhead conveyor system with height adjustment. Powder coating takes place in KC-08 spray boo ...