other metal working machines used for sale (11,045)

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm

Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm

1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

max. temperature: 1000 Gradsize of opening: 170 x 90 mmdepth of chamber: 280 mmtotal power requirement: 3 kWweight of the machine ca.: 80 kgdimensions: 0,7 x 0,55 x 0,72 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 2800 Wattvolume: 100 Lfilter: HEPA : 230 mbarmaterial: INOX Edelstahl Behälter: 5000 mmhose diam.: 32 mm: 5000 mmnoise: 82 dBdimensions: LxBxH 50 x 50 x 135 cmweight: 35 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

number of controlled axis: - workpiece weight: - kgthroat: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control

sheet width: 3050 mmplate thickness: 6 mmdistance between columns: mmblade length: 3050 mmtotal power requirement: 11 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: 2,1 x 3,3 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 5600 mmworkpiece height: 1500 mmtotal power requirement: 11 kWweight of the machine ca.: 150 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 0 mmy-travel: 0 mmworkpiece height: mmtotal power requirement: 0 kWweight of the machine ca.: tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 90 mmdrawing length: 430 mmworking speed: 4 - 12 m/minslot-milling length: 400 mmreturn speed: 15 m/mintotal power requirement: 5,5 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 1,3 x 1,7 x 1,5 m• div. pull broaches and guidancesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 9000 mmwidth: 6000 mmnumber: 6 T-slot - width: 35/62 mmT-slot - distance: 250 mmnumber of T-slots: 8 Plate thickness: 350 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe Palttenfeld consists of 9 plates,size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3250 mmwidth: 3000 mmnumber: 2 T-slot - width: 35/56 mmT-slot - distance: 180 mmnumber of T-slots: 7 Plate thickness: 245 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe Palttenfeld consists of 9 plates,size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber

Blasthouse components as a kit for self-assembly or by assembly by our specialist personnel. Flat conveying floor, transverse screw conveyor, bucket elevator, wind screening, sieve, abrasive bunker, blasting device, filter system, blow-in system, suction wall and electrical control.

Blasting container for blasting glass beads, ceramic balls, grnat sand, hard cast gravel with conveying floor, abrasive preparation, blasting device, filter system. Internal dimensions L=5850 B= 2300. Side Door Open for easy loading with the forklift

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Bosch Starter Lifetime Testing The machine is a Bosch in-house production. It is used to check the service life or durability of starters (including starters) of engines. Manufacturer: Bosch Type: Machine for service life testing of starters Condition: used The testing machine is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Hinst continuous cleaning system Continuous washing systems from the manufacturer Hinst are designed to treat series parts in large quantities with the highest purity requirements at the same time. Appendices No. 04.333 Year of construction 12.2004 Dimensions approx. WxDxH: 3.80 x 4.30 x 3.80m Incl. - 6 baskets: Basket dimensions: 48,5x48,5x H26cm - Roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored with a value of € 3,500 these are included in the purchase price. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines