other metal working machines used for sale (11,050)

Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible.

Drive: servo motors, individually for each axis, max. number of bending slides: 8, spring steel wire diameter: 0.2-1mm, copper wire diameter: 0.3-2mm, max. winding mandrel diameter: 10mm, max. winding spindle travel: 45mm, max. length of rotating initial leg: 50mm, end leg length: theoretically unlimited, winding spindle revolutions: limited by the winding spindle travel of 45mm, control system: 4-axis CNC positioning control Pronumerik Schleicher, the machine operates using DOS-based programming, including pay-off reel, accessories, operating manuals and documentation, well-maintained and in good condition. On-site inspection is possible.

General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolant Changing kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronism Additional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machinin Oil mist filter for emulsion or oilOil m ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machine DMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics IoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS) Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

GeneralCNC Grindingmachine; Control: Fanuc 32iA Special equipmentRMS-Sensor Special equipment-Transformer - Handwheel - 680l coolant system Special equipment- Program memory (512kb) - Registerable programs (1000 pcs.) - Signal light (3-stage) - High-performance magnetic separator (120 l/min) - Bed cleaning - Coolant temperature control unit - Wheel spindle cooling function - ATC unit (6 tools)

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changer Number of tools 32 NC rotary table w. swivel axisNC rotary table with swivel axis Type of Measuring system Direct measuring system Table surface 500 x 380 mmCentre bore 30H7 mmMaximum load (table centre) 200 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 63 mmRotation speed max.4. Axis 33 rpm4. Axes (swivelling range) 360 x 0,001 degree5. Axes (swivelling range) 0 - 180 x 0,001 degreeRotation Speed 5. Axis 26 rpmRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interface Special equipmentSealing air in swivel rotary table

GeneralCNC Swiss type lathe with Fanuc control; Control: FANUC 310 iTB Working areaTurning diameter33 mmDrive for support for back workingDrive for support for back working operation (slide 2) power 0.55/1.1 KW Special equipment-Chip convoyer with discharge height 1200 mm Special equipmentRMS-Sensor Special equipment-Self-regulating double-cone guide bushing -600 l cooling system. 8 and 20 bar pump, paper belt filter - IEMCA Boss 545/32 e automatic bar feeder, max. length 3200 mm.

Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 250°C. Approx. dimensions X/Y/Z: 3000mm/2200mm/2500mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

Offered for sale is an electric tempering oven with a maximum operating temperature of 100°C. Approx. dimensions X/Y/Z: 1800mm/1800mm/1600mm. Operation: 2020/2021 in two-shift operation. Inspection possible by arrangement.

FANUC ROBOCUT α-1iC wire EDM machine wire cut EDM machine Year of manufacture 2004 Type A04B-0316-B001#E5 FANUC ROBOCUT α-1iC Technical Data Specification Details Machine Type: CNC Wire EDM Machine Model No.: ROBOCUT α-1iC Your article number: A04B-0316-B001#E5 Date of manufacture: March 2004 Serial Number: P043C1119 CNC Control: FANUC Series 180is-WB Controlled axes: 5 – X, Y, Z, U, V Travel X: 550 mm Travel Y: 370 mm Travel Z: approx. 310–410 mm (depending on configuration) Travel U: ±60 mm / 120 mm total Travel V: ±60 mm / 120 mm total Rapid traverse speed X/Y/Z: 900 mm/min Rapid traverse speed U/V: 450 mm/min Table size: approx. 780 × 600 mm Maximum workpiece approx. 820 × 730 × 300 mm Maximum workpiece weight 1,000 kg Wire diameter 0.10–0.30 mm Automatic wire threading: Yes Maximum conicity approx. ±30° Minimum programmable increment 0. ...

Plastic 3D printer manufactured in 2002. This Stratasys FDM TitanTI supports various model materials including ABS and PC, with a tip size of T16. It features an envelope temperature set point of 145 °C and comes with optional accessories such as software, maintenance tools, and a large ultrasonic wash bath. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI machine we have for sale. Contact us for further details.

This 3-axis Stratasys FDM TitanTI T0031 was manufactured in 2004. It features a build envelope of 406 x 355 x 406 mm and is compatible with various model materials including ABS and PC-ABS. The machine includes additional accessories such as an ultrasonic cleaning tank and replacement print tips. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI T0031 machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15 touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details.

This 4-axis OPS INGERSOLL Gantry Eagle 1200 Plus was manufactured in 2014. It features a robust weight of 12,500 kg and includes a rotary tool changer magazine with multiple electrode holders. If you are looking to get high-quality die-sinking capabilities, consider the OPS INGERSOLL Gantry Eagle 1200 Plus machine we have for sale. Contact us for further details.

Machine tool manufactured in 2013. This ABK abk-TP-20-250 features a maximum pressure of 200 bar and a pressing force of 1962 kN. It has a connected load of 30 kW and operates at a voltage of 400V with a frequency of 50Hz. If you are looking to get high-quality pressing capabilities, consider the ABK abk-TP-20-250 machine we have for sale. Contact us for further details.

ALPHA LASER ALFlak300 M was manufactured in 2017. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The machine offers a movement range of 340 x 320 x 420 mm and a maximum movement speed of 25 mm/s. If you are looking to get high-quality welding capabilities, consider the ALPHA LASER ALFlak300 M machine we have for sale. Contact us for further details.

Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm -Miter cut: up to 45° -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg

• Cylindrical grinding machine HTG600 H.Tschudin built in 1975 • CNC universal tool milling machine Deckel FP4A built in 1985 • Fanuc Robocut a-OB CNC Wire EDM Machine built in 1995

For sale is a professional Hexagon Absolute Arm 8530 with AS1 laser scanner. The system was used professionally and is in very good technical and visual condition. Areas of application • Series accompaniment • Incoming goods inspection • Reverse engineering • Tool correction • Initial sampling • Area comparison • Quality inspection Scope of delivery: • Measuring arm 8530 • AS1 Scanner • Control Pack 3 (CP3) • Magnetic mounting plate • Transport and accessory case • Pushbutton set / reference accessories • Power supply, cables and other accessories

FANUC ROBOCUT α-C800iB Wire EDM MachineTechnical Specifications:Max. Workpiece Dimensions: 1,250 × 975 × 300 mmMax. Workpiece Weight: 3,000 kgWire Diameter: 0.10–0.30 mmMax. Taper Angle: ±30° / 150 mmMax. Wire Spool Weight: 16 kg

Key data: 600 mm, 400 mm

Measuring range: 500x400x400 mm, max. workpiece weight: 180 kg, with touch probe, Fabr. RENISHAW, type: MH20I, various ruby replacement probes in a box and evaluation hardware

Key data: 600 mm, 400 mm

with CNC control, Fabr. SODICK, type: LN2, travels: X-axis: 350 mm, Y-axis: 250 mm, Z-axis: 270 mm, with automatic Tool changer with 4 tool positions, resolution: 0.0001 mm, work table (ceramic), size: 600x400 mm, max. workpiece weight: 550 kg, max. electrode weight: 50 kg, dielectric capacity: 400 l, machine dimensions: 2080x1955x2350 mm, machine weight: 3200 kg, with CO2 extinguishing system, drained . Cutting time: 1690 h

with extraction system, Fabr. LOTUS LASER SYSTEMS, and other pre-filter extraction system, type: VACUAIR UML 350, as good as new

ZIPPEL REMA K1 400 3 LB Industrial parts cleaning plant (washing plant) Year of construction 2013 Washing, rinsing Drying in a continuous system with washing basket to remove oils, chips and dirt from workpieces before further processing or assembly. Approval according to WHG. System still under power. Machine description – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes and errors. All other accessories visible in the photos are not included in the scope of delivery, therefore not a component for this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively dismantling, spreading and loading Delivery time immediately Subject to prior sale / payment immediately upon completion  ...

Two Nabertherm melting furnaces are offered. Power 1/2: 46kW/90kW, volume 1/2: 600l. Inspection possible by arrangement.

A shot blasting machine is offered. Equipped with an overhead rail system. Inspection possible by arrangement.

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, orbital riveting machine type HN1 -Shaft diameter: 12 mm -Motor: 0.37 kW 1390 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg

Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, Orbital riveting machine type HN1B-2 -Shaft diameter: 10 mm -Motor: 0.37 kW 1400 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg