milling machines wood used for sale (598)

Panhans swivel spindle milling machine with 4-roller feed Type: 231 Series: 2000 Year of manufacture: 2000 CE Table size L 1100 mm x W 760 mm Table height 870 mm Motor power 5.5 kW Speeds 3000/4500/6000/9000 rpm. Height adjustment of the milling mandrel 120 mm Milling mandrel diameter 30 mm Swivel range -5° to +45° Height adjustment and swivel by handwheel Suction nozzle diameter 2 x 120 mm 400 V/N/PE / 50 Hz / 3 pH Current type AC Full load current 22 A with 4-roller feed with some tools complete with operating instructions Machine is in very good condition, as very little used, max. 100 operating hours Net weight 630 mm

Cross-section milling machine Festo Universal profiling cutter Type: UP 65 Milling finger tines and finger joints Cross-profiling in endless cycle succession Milling depth maximum 65 mm Maximum working height 100 mm Tool clamping width 200 mm Support table length x width 657 mm x 272 mm Motor power 7.5 kW Speed of the milling spindle 4,300 rpm Tool flight circle maximum 250 mm Milling spindle diameter 40 mm Cutting speed 56 m/sec. Working cycles maximum 8 per minute Air consumption per work stroke 14 NI (standard liters) Cutting cross-section per stroke maximum 60 cm² Air requirement 20 m³/min. Extraction connection 1 x 250 mm x 140 mm, 1 x 120 mm diameter Speed of table movement up and down can be regulated Weight: 300 kg L x W x H : 850 mm x 700 mm x 1,170 mm

Wooden sling jaws (with long right sling jaw) Tool Ø max. 180 mm Speed 1,700/3,500/6,000/8,000 rpm (manual belt reposition) Connection 400 V, 3~, 50 Hz, 5A, 2.2 kW Weight approx. 156 kg

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

Key data: 2500 mm, 1240 mm, 100 mm

CNC Machining Center SCM Type TECH Z 25 PLUS R4R4 Year of manufacture 2005 In 2022 new control system KVARA6 4A AN +6A MECH- ESA-GV (for 9,000 EUROS) Working range X between stops 2500 mm Vertical bores Y 1018 mm Milling Y 1240 mm Plate throughput maximum 180 mm Maximum panel thickness Z = 100 mm Stroke Z axis 200 mm Central lubrication at the top and bottom Drilling unit with 15 vertical spindles 6 horizontal spindles, 4 in the X direction and 2 in the Y direction Spindle speed 4000 rpm. Motor power spindle rotation 2.2 kW Travel speed of the X-Y axes 42.4 m/min. Travel speed Z axis 11.5 m/min. Main spindle approx. 6.6 kW Maximum speed of the main spindle 24000 rpm. Front tool changer with 4 tool holders Rear tool changer with 4 tool holders Rectangular Vacuum Cups 16 Pieces Tool holder HSK 63 Compressed air 6/7 bar, compressed air consumption 150 l Vacu ...

This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details.

This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details.

Table milling machine wood power with 3-roller feed Type: Minimax t45c LL Year of Make: 2022 CE Table milling machine with rigid milling spindle, gray cast iron work table, Table extension and pull-out workpiece support and 3-roller feed VSA 38 B1 - Work table L 1945 mm x W 695 mm, table height 900 mm - Spindle speeds 3500/7000/10000 rpm. - Spindle protrusion over table max. 130 mm - Milling spindle right-left rotation - Useful length of the spindle 100 mm - Spindle diameter 30 mm - Tool diameter can be lowered max. 180 mm - Tool profile milling diameter max. 210 mm - Motor 5 kW 400 V 50 Hz - Suction nozzle 2 pieces each 120 mm diameter - Incl. aluminium stop jaws, table extensions left and right, sheet milling protection cover and extendable workpiece support (up to 1950 x 550 mm) on the machine front Very good condition Machine dimensions L 1945 mm x W 575 mm  ...

This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details.

This 3-axis VITAP POINT 2 CNC processing center was manufactured in 2016. It features a unique patented belt transport system for uninterrupted panel movement and a maximum panel size with no limits. The machine includes 9 vertical independent spindles and offers high productivity with zero setup time. If you are looking to get high-quality drilling and grooving capabilities, consider the VITAP POINT 2 machine we have for sale. Contact us for further details.

This 4-axis Weeke PROFI BMG211/32/12/K was manufactured in 2015. It operates on a supply voltage of 400 V / 230 V and is designed for 3-phase power with a maximum operating full load current of 38 A. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke PROFI BMG211/32/12/K machine we have for sale. Contact us for further details.