Spindle moulders used for sale (55)

Table milling machine with 2 motors each 2 speed Research apparatus with 4 rollers

• Spindle moulder • Serial number 1152 • Motor power 5,50 KW • Spindle diameter 50 mm • Table size 1000 x 630 mm • Working height from the floor 850 mm • Maximum tool diameter under table approx, 150 mm • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 1300 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-143

SCM Spindle Moulder Model T150 with Tilting Shaft - spindle moulder shaft inclination -10 / +45 degrees - spindle moulder shaft diameter 35mm - max tool diameter with profile guide 250mm - maximum tool diameter that can be retracted under the table 320mm - "Fast" sector table for optimizing the support of the piece under the tool, adjustable from the outside, as an alternative to the table rings Machine with: Flat "LL" version with 2 profile extensions - length 2500mm, complete with adjustable front support bar for large pieces, and with emergency button Guide and spindle moulder shaft with electronic programming Complete with: - Hanging control panel - total excludability of the guide from the plane - 3-axis microprocessor electronic programmer for automatic programming of the different Positions : spindle moulder height Spindle moulder tilt Positioning ...

Table:Dimensions: 1200 x 800 mmWorktop height: 890 mmGeometry:Shaft / front of table face: 390 mmShaft / front extension distance output: 860 mmShaft: Rotational speeds: 3000 / 4500 / 6000 / 9000 rpmDiameter: Ø 50 mmInterchangeable fixed shaft – Morse taper n°5Standard shaft stroke: 185 mmTools: Maximum tool diameter: Ø 50 / 40 / 30 mmMotorization:Motor power: 5.5 kWStandard TS50 router: 5.5 – 7.5 kW / 400 VWeight:Approx. 720 to 900 kg Auction-ID: A1-45443-75

Table milling machine Bäuerle With long table topper Type SFM Machine No. 4702/81 Built in 1981 With 4 rollers feed Hol-Her Spindle diameter 30 mm Motor power 7.5/9.5 kW Table size 2000 mm x 920 mm Extendable table cover for large frames Table opening maximum approx. 400 mm Maximum clamping length of the spindle approx. 130 mm Spindle left/right rotation Speeds adjustable via straps 2800 - 12000 rpm Weight approx. 750 kg

Shaft:Diameter: Ø 50 mmWorking length above table: 150 mmVertical shaft stroke: 205 mmRotational speeds: 3,000 / 4,500 / 6,000 / 7,000 rpmAttachment:Machine with driveDimensions (estimate): approx. 1,800 × 1,300 × 1,350 mm (to be confirmed)Weight (estimate): approx. 780 kg (to be confirmed) Auction-ID: A1-45443-76

Table milling machine Bäuerle Type SFM With 3 rollers feed Spindle diameter 30 mm Motor power 3/4 kW Table size 1100 mm x 900 mm Table opening maximum 400 mm Clamping length of the spindle maximum 130 mm Spindle left/right rotation Speeds adjustable via straps 2800 / 4500 / 5600 / 6000 / 9000 / 12000 rpm With table extension Weight approx. 650 kg

Construction:One-piece cast iron frameTable:Width: 1,200 mmDepth: 800 mmShaft:Diameter: 50 mmRotational speeds:3,000 / 4,500 / 6,000 / 9,000 rpmEquipment:Swivel micrometric guideShaft clearance under the tableFoot brakeShaft locking at the footDimensions (estimate):approx. 1,900 × 1,250 × 1,250 mm (to be confirmed)Weight (estimate): approx. 820 kg (to be confirmed) Auction-ID: A1-45443-74

SCM T 130 LL heavy table milling machine Version LL - long table with extendable frame support Motor 7.5 kW 5 speeds 3000 - 10000 rpm. autom. Spindle adjustment high - low Top control panel Milling fence with fine adjustment WITHOUT feeder Machine is FUNCTIONAL TESTED in GOOD - CONDITION From stock Lieboch

MARTIN T20 Digital RouterMotor 5–6 kW (option 7.5/9.5 kW). Electric height and opening adjustment. Stroke 150 mm. Speeds 3000/4500/6000/9000 rpm (continuously variable option 1000–12000). Table opening Ø72–305 mm, option Ø70–220 mm. Suction Ø120 mm. Noise: 76.6 dB (vacuum) / 81.7 dB (machining). Weight approx. 860 kg. Auction-ID: A1-45443-82

Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

- 4 rotation speeds: 2900/4000/5800/8000 rpm. - With roller feeder. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44896-9

TECHNICAL DATA: Spindle: Ø 35 mm Spindle tilt: 0° - 45° Manual spindle height adjustment Adjustment of the direction of rotation Adjustable speed from 3000 to 10000 rpm Installed power: 5.5 hp EQUIPMENT: 1 3-roller drive (Maggi Steff 2034)

Auction-ID: A3-43501-20860

gebr. Table milling machine ALDINGER Type: S 15 Year: 1959 Engine power: 4 / 5 hp (2.94 / 3.7 kW) Doubling the speed via selector switch Left/right rotation via selector switch 6 Speeds: 2,800 / 3,500 / 4,500 / 5,600 / 7,000 / 9,000 rpm Height adjustment by handwheel Extraction connection: 120 mm Table size: 95 x 105 cm Table height: 85 cm 525 kg Unoverhauled - ACTUAL state from carpentry dissolution FIXED PRICE

Table dimensions: 1100 x 750 mmMotor output: 5 kWSpindle diameter: 30 mmreus: 2900/4400/6000/8000 U/minWeight: 500 kgYear: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS Table dimensions: 2530 x 400 mm Equipped with extendable table Spindle: Ø 35 mm Speed: max. 10,000 rpm Installed power: 4 kW

Table dimensions: 1.100 x 760 mmMotor output: 4,7 kWSpindle diameter: 30 mmreus: 3.000/4.500/6.000/9.000 U/minWeight: kgYear: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Table size: 2400 x 900 mm Extendable table 1 4-roller drive (with variator) Installed power: 5 kW Lockers Ø 35 mm Motorized spindle tilt +/- 45° Motorized height adjustment Dornfix clamping system

Table dimensions: 1200x730 mmMotor output: 5,5 kWSpindle diameter: 30 mmreus: 3000-4500-6000-7000-10000 U/minWeight: 810 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg

0: 4 St.0: 120 mmFeed speed: stufenlos, 3-18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg

0: 3 St.0: 80 mmFeed speed: (4 Stufen): 4/8/9/18 m/min.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Table milling machine MARTIN T27 Fix (rigid milling machine – not swivelling!) Year 2008 Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (amplified motor power) Rated current: 24 A Speeds: 3rd / 4th / 5th / 6th / 8,000 / 10,000 rpm Max. diameter milling tool: 250 mm Max. diameter of slitting tool: 350 mm electr. Height adjustment (stroke: 150 mm) Touch screen control (program memory: 100 / tool memory: 500) Table size: 125.5 x 90 cm Milling spindle: 30 + 40 mm MARTIN Cast Stop Jaws Engine brake Spindle blocking: pneumatic Central lubrication Suction nozzle: 2 x 120 mm Dimensions: 295 cm x 140 cm x 186 cm (L x W x H) Weight: approx. 1,300 kg Extras: Electrically adjustable table opening (infinitely variable) Electrical positioning of the milling fence (mechanical infeed jaw) Swivel device for milling fence Centrex Protection (Aigner) ...

Table dimensions: 2500x 780 mmMotor output: 7,5 kWSpindle diameter: , mmreus: 1.500 - 10.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine DROMA Type FM-4 Machine No. 8301 Built in 1994 Motor power: 5 kW With engine brake Spindle left and right rotation Speeds 3000/4500/6000/9000 rpm Spindle diameter 30 mm Spindle clamping length 150 mm Extraction connection diameter 2x120 mm Milling fence with fine adjustment left and right Table size 1010 mm x 900 mm Front and rear table extensions Dimensions 1 piece 1200 mm x 750 mm, 1 piece 1000 mm x 720 mm Machine weight 700 kg Weight of the table extensions each approx. 20 kg Dimensions Machine 1500 mm x 1200 mm x H 1400 mm With table extensions, total length 3220 mm Loading dimensions 1 pallet 1500 mm x 1200 mm x H 1600 mm Weight approx. 710 kg 1 pallet 1200 mm x 800 mm x 1200 mm, weight approx. 60 kg

Table dimensions: 680 x 1.000 mmMotor output: 4 kWSpindle diameter: 30 mmreus: 3.000/4.500/6.000/8.000 U/min: 200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Shaft: Ø 40 mm Table size: 1100 x 900 mm 1 4-roller drive Installed power: 6 HP

Connected load 380V 6.8kW 12A with sliding table 1100 mm Table size 1100 x 900 mm Height adjustment with hand crank Integral stop jaws Stops individually adjustable via Siko counter Aigner milling cutter protection device Suction 1x120 1x150 mm Speeds: 2900/4400/6000/8000/10000 rpm

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

TF170E Table milling machine with sliding table 1m with transverse stop

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and erro ...

Technical details: - Table dimensions (LxWxH): 2,500 x 800 x 890 mm - Max. extension of the additional workpiece support: 400 mm - Built-in spindle diameter: 30 mm - Spindle diameters: 30/35/40/50 mm (not included!) - Spindle speeds: 3,000/4,500/6,000/8,000/10,000 rpm - Speed display via light-emitting diodes - Max. opening of the work surface (diameter): 380 mm - Diameter of extraction nozzle milling fence: 120 mm - Diameter of suction nozzle under table: 120 mm - Height display for position of the milling spindle in the handwheel - Arc milling stop for curly workpieces with fine adjustment - Table extensions on both sides - Magnetic brake - Adjustable milling fence - Pressure device for milling fence Optional accessory: - Aigner integral stop - Cone spindle M5 - Right-left rotation according to CE standard - 1 x field feeder with right-left rotation and 2 speeds e ...

- Handwheel adjustment of spindle height/angle - Spindle angle displayed via viewing window, swivel range -4 to + 45° - Right-left rotation - double-sided table extension to 2,000 mm - Engine power 5 kW - Speed 3,000 / 4,500 / 6,000 / 9,000 / 12,000 rpm (manually adjustable) - Suction nozzle Ø 2 x 120 mm - Emergency stop switch) - Power: 380 V, 50 Hz, 3~, 10.8 A - with 4-roller feeder

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

SPECIFICATIONS: Table size: 2200x450 mm (extendable) Installed power: 5 Kw EQUIPMENT: Drive on 3 rollers Accessories

Brand: Martin Type: Table milling machine with heavy tenon table Spindle: ø30 mm Motor: 4 KW

Brand: Paoloni Type: T140 Motor power: 5 KW Milling mandrel : 30 mm Height adjustment milling spindle: 140 mm Speeds: 3000-4500-6000-9000 Spindle height adjustment: Handwheel adjustment with analog display Feed: HolzHerr 3 roll Option: Aigner integral stop

Detailed info: Aluminium format sliding carriage with hardened steel guide rods. Large solid work table made of grey cast iron. ø190 mm table opening with undercounter extraction. Electronic speed display. Milling stop ø250 mm. Built-in milling spindle lock. 4 speeds as standard. Milling spindle can be swiveled backwards. With integral stop 500 mm and telescopic stop 900 mm, extendable, with 2 stops and tensioners made in EU Technical data: 400V Spindle diameter 30 mm swiveling spindle 90°/45° Spindle height adjustment 175 mm Spindle clamping length 125 mm tool diameter 250 mm with optionally available tenon slot hood 320 mm Spindle speed 1400/3500/6000/8000 Weight 390 kg

TECHNICAL DATA: Vertical milling machine Tool shank diameter mm: 35 Dimensions of the work table mm: 2400 extendable in width 4 speeds, self-braking Installed capacity KW: 5,5

Weibert WJ-F40 Table milling machine Milling spindle 30mm 90° 4 speeds 1400/3500/6000/8000 rpm Table casting L= 1000mm W= 500mm 2.2 KW 400V Right+Left Run WJ-600300 + Options

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

Table dimensions mm: 1000 x 900 With drive system