sheet metal working used for sale (3,274)

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Accessories - Machine frame with Y-boom and integrated laser unit - Laser unit: CO2 laser TruFlow4000 High-frequency excited - Maintenance-free turbo centrifugal blower - Reflecting telescope - Refrigeration unit - Position laser diode - Laser power control - Logbook function - Drives: Maintenance-free three-phase servo motors - Lighting under the boom - Magnetic coupling for processing head - Head detection - AutoLasPlus - Hanging control panel - TFT color screen - Teachpanel - Network connection RJ 45 Machining Method: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) -

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick-change device - Autom. Sheet metal outer edge detection - Position laser diode - progr. Cutting Gas Selection/Pressure Adjustment - Microweld - PMS Plasma Sensors - Sprintlas - ContourLas - AutoLas Plus - Oil spraying device - Autom. Pallet Changer - Work area lighting - Conveyors for small parts/waste - Multi-chamber extraction - Compact dust collector - Automatic switch-off - Safety devices - ToPs 100 lite -RJ 45 network connection - 3.5 floppy disk drive

Double reel, reel, unwind reel -Unwind reel: Double reel with 2 servo motors (each reel driven individually) -Drive: 2 Nucleus NUDrive MP85 10A Bgr2 R Rev2 IP64 servo motors -Reel: Ø 1050 mm -Photos: see photos -Dimensions: 1050/840/H1755 mm -Weight: 200 kg

Key data: 2000 mm, 1 mm

Schechtl bending bench 2000mmx1mm in very good condition with foot switch. You will receive an invoice with VAT, net price incl. loading. Shipping available worldwide. for questions Watsapp 0049(0)1607838365

Key data: 200 mm, 1 mm

Schechtl manual bending machine KS 200 2000mmx1mm in good condition. You will receive an invoice with VAT and net price. Shipping available worldwide. for questions Watsapp 0049(0)1607838365

Key data: 2500 mm, 1 mm

Schechtl guillotine shears 2500mmx1.25mm in good condition with new knife and hand depth stop and foot switch. You will receive an invoice with VAT and net price. Shipping available worldwide. for questions Watsapp 0049(0)1607838365

We sell here a Schlebach EHA eaves notch unit in fully functional condition. You will receive a proper invoice with a guarantee. Shipping possible worldwide. For questions, for more informations and pictuers Watsapp 0049(0)1607838365.

2 pieces in stock No. 1.: Manufacturer Julius, type AH 630 Coil diameter inside from 250 - 450 mm Outer diameter max. 1000 mm Width max. 200 mm with brake good condition, ready to use 550.-€ No. 2: Manufacturer Julius, type AH 41 Coil diameter inside from 250 - 300 mm Width max. 295 mm with brake good condition, ready to use 550.-€

Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of leveling rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min: 0.4 mm Sheet thickness - max.: 2.0 mm Weight: 170 Infinitely variable feed speed Clockwise and counterclockwise rotation Operating mode selector switch for manual and automatic operation Belt loop control very good condition

Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Key data: 6020 mm, 1 mm

with roller scissors and emergency stop rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 1.5 mm Sheet thickness max. VA 0.7 Projection 1000 mm Color: Green Total power requirement 16 A Dimensions 7000 x 1400 x 1400 mm Weight 3200 kg Upper beam stroke (opening width) 150 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Machine number 301644

Key data: 40 mm, 40 mm, 10 mm

The machine is in extremely good condition, as it was not used much by us. We can also organize a complete transport for you. The price is net plus VAT. Punching force: 55 t Max. punching capacity: Ø40 mm for 10 mm steel Alternative: 20 × 20 mm solid material Projection: approx. 250 mm Stroke: 60 mm Stroke rate: approx. 37 strokes/min (at 20 mm stroke) Table size: approx. 550 × 250 mm ✂️ Flat steel shears Max. 300 × 15 mm (width × thickness) Alternative: 200 × 20 mm Knife length: approx. 305 mm Steel bar shears Round steel: Ø40 mm Square steel: 40 mm Profile shears (angle steel) 90°: up to 120 × 120 × 10 mm 45°: approx. 70 × 70 × 7 mm Notching station Max. sheet thickness: 10 mm Notch size: approx. 42 × 42 mm ⚙️ Drive & Machine Hydraulic motor: 5.5 kW Dimensions: approx. 1480 × 1800 × 1730 mm ...

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

Key data: 1020 mm, 2 mm

with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9

Key data: 1050 mm, 1 mm

with segmented upper/lower and bending beams, mobile on castors Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1050 mm Sheet thickness steel: 1.2 mm Colour: green Dimensions: 1400 x 700 x 1200 mm Machine weight: 150 kg Bending angle (max.): 145 degrees Machine number 4052-0691

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Key data: 1020 mm, 1 mm

3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685

Press force: 200t, bending length: 3100mm, frame distance: 2750mm, throat depth: 300mm, stroke: 400mm, installation height: 600mm, table width: 200mm, machine dimensions X/Y/Z: approx. 4300mm/2400mm/360mm, weight: approx. 18500kg. An on-site inspection is possible.

A hydraulic CNC press brake Trumpf is available. Press force: 500kN, stroke: 215mm, max. operating pressure: 290bar, frame width: 1040mm, working width: 1270mm, installation height: 385mm, back gauge: 860mm. Machine dimensions X/Y/Z: approx. 2000mm/2100mm/2400mm, weight: approx. 4750kg. Documentation available. An on-site inspection is possible. Expected to be available end of May 2026.

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Offer 26016 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Accessories - motorized bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm

Key data: 3200 mm, 1 mm

with motor depth stop 1000 mm, with CNC graphic touch control POS2000 on the swivel arm, with offset bending beam Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Max. back gauge: 1000 mm Colour: blue/grey Dimensions: 4450 x 2000 x 1850 mm Machine weight: 2700 kg Upper beam stroke: 150 mm without roller scissors Opening width: 150 mm Bending angle (max.): 160 degrees Machine number: 8500110