rubber machines used for sale (414)

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

Key data: 300 mm, 600 mm

Diameter: 300 mm Length: 600 mm Surface: smooth NIP setting: manual Motor: 30 kW Siemens Dimensions: approx. 1700 x 1560 x 1635 mm Weight: approx. 3000 kg CE marked from 2018 (engine with reverse gear, knee emergency stop)

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Key data: 400 mm, 1000 mm

Buzuluk 14231 CE conversion in 2010 Antifriction bearing Motor: 55 kW Motorized NIP adjustment Baseplate

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Key data: 560 , 1500

Mixing mill 560 x 1500 mm Buzuluk Type 14203 Roller bearing Motor: 132 kW Motorized NIP adjustment

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

Lab Mixer Tangential Chamber volume 2,8 l / 2 l netto Sliding door AC motor 22 kW Year 1971

Tangential nett volume 70 l drop door AC motor 320 kW / 380 V / 50 Hz, 1483 RPM Year 1987

Press 800 x 800 clamping force cca 3000kN electrical heated

pneumatic Bale cutter max. Width 550 mm max. Length 800 mm Blade stroke 280 mm

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

The DM 302 sealing foaming system sets new standards in the automated processing of electrical housings. Equipped with the MK 450 high-precision mixing head, this system is specially optimized for processing 2-component PU foam systems on plastic and aluminum housings. A central highlight of the system is the innovative high-pressure water flushing. By converting potential energy into kinetic energy, the mixing chamber is mechanically cleaned in a highly efficient manner within a few seconds. This not only provides the user with an environmental advantage by dispensing with conventional cleaners, but also significantly increases productivity by eliminating downtime for refilling or replacing cleaning chemicals. The technical equipment of the system is designed for maximum reliability and ease of use. The system is controlled via a wear-free industrial PC with central data storage on a co ...

Laboratory press for test plates, make RUCKS, built in 1998, 2 floors electrically heated, Press force 440 kN, max operating pressure 250 bar

Key data: 10 liter, 8 liter, 1

available 10l tangential mixer Description attached!

Powder machine Fabikat PEKU with 1000 mm passage width for powdering top and bottom for Plates, profiles, hoses, etc.

Sale of spare parts of EEK 125.22 V, including vacuum cylinder, screw and V-pump, 6 x TCU, Power cabinet with FU 165 KW

Offered is a rubber injection moulding machine of the company Klöckner DESMA, stroke volume 1600cm³, clamping force 2500kN, injection pressure 2078bar, machine weight approx. 11000kg. A visit on site is possible by arrangement.

Press No.1 Year of production: 2021 Working hours: 8185 h Price: EXW Slovakia Subject to prior sale Press No.2 Year of production: 2022 Working hours: 395 h Price: EXW Slovakia Subject to prior sale Heating plates size: 670 mm x 980 mm Injection volume: 3300 ccm Data attached. The Presses are still installed Subject to prior sale

machine measurements: ca. 1030 x 1110 x 1950 mmmachine weight: 800 kgpower capacity: ca. 2,8 kWCondition: usedSpecification: SiloStar 924 dosing system - used- For dosing liquid silicone LSR- LSR dosing with servo-hydraulic unit, servo motor 2.8 kW- Dosing with piston pumps- Uniform emptying of components A + B via proportional compensation cylinders- Variable mixing ratio- Touchscreen with visualised user interface- Containers: 200 litre drums- Operation via 10 inch touch display- Automatic mixing material pressure control with sensor directly on the mixing block- Pressure sensor for A + B- Circulation device A + B- Power connection: 380-480 VAC, 50/60 Hz (3P + PE), 16 A- Mixing head machine connection- Hose package 2x nylon DN 16 x 2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Test force: -- kNDimensions (HxWxD): -- mmweight: 76 kgCondition: Used, ready for useSpecification: Mitutoyo image processing and profile measuring deviceType: Quick Scope QS-250Z 1J- UsedThe Quick Scope QS-250Z is used to measure:- Outer diameter- Inner diameter- Distance measurement- Parallelism- AngularityThe device was used in quality assurance in a single-shift operation.Technical data:- Measuring range: X = 200 mm, Y = 250 mm, Z = 100 mm- Accuracy: 5 µ / resolution 0.5 µm- Image capture unit: 1/3 CCD color camera- Travel speed max.: 80 mm/s- Acceleration max.: 250 mm/s²- Table dimensions: 269 x 311 mmLighting:- Transmitted light: 12V / 30W halogen- Coaxial incident light: 12V / 50W halogen- Fiber optic ring light: 12V / 100W halogenSoftware: QSPAK Version 3.1Operating system: Win10proWorkpiece weight: max. 10 kgWeight:  ...

clamping force: 500 kNinjection volume: 76,5 cm³screw diameter: 32 mmplaten size: 360 x 335 mmCondition: used, as good as newSpecification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit:- clamping unit: horizontal- Clamping force: 500 kN- Opening stroke max.: 400 mm- Platen distance max.: 650 mm- Mould installation height min.: 250 mm- Clear width between the tie bars: 360 x 335 mm- Ejector stroke max.: 80 mmInjection unit SP 82:- Screw diameter: 32 mm- Screw L/D ratio: 16.3- Screw stroke max.: 95 mm- Injection volume max.: 76.5 cm³- Injection pressure: 1076 bar- Plasticising flow: 13 g/s- Injection flow:  ...

roll diameter: 200 mmroll length: 400 mmrolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monoblock laboratory rolling mill 200 x 400 mm - new- Roller diameter: 200 mm- Roll length: 400 mm- Roll bore: peripherally drilled- Individual drives: variable friction ratio- Roller bearings: roller bearings with manual grease lubrication- Gap adjustment: hydraulic- Gap adjustment: approx. 1 - 20 mm, during normal operation operation- Speed range approx.: 2.5 - 19.5 rpm- New hydraulic unit for roller gap and emergency system emergency system- New Johnson-Fluiten rotary joints- two adjustable guide plates Tecafine PE5 Natural ...

roll diameter: 250 mmroll length: 500 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kWCondition: new rolling mill, with CE marking, with 2 year warrantySpecification: Monobloc laboratory rolling mill 250 x 500 mm - new- roll diameter: 250 mm- Roll length: 500 mm- Roll bore: peripherally drilled- Single drives: variable friction ratio- Roller bearing: roller bearing with manual grease lubrication- Gap adjustment: hydraulic- new hydraulic unit for roller nip and emergency system- New rotary unions make Johnson-Fluiten- two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of ...

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- two safety brakes for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New  ...

roll diameter: 600 mmroll length: 1800 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch 0total power requirement: 132 kWCondition: used, completely overhauled, with warrantySpecification: Rolling mill 600 x 1800 mm - used monobloc model - motor under the rolls- roller diameter: 600 mm- roll length: 1800 mm- Roller core with central chamber for water cooling- Fixed friction between the rolls - hydr. gap adjustment: new- hydraulic unit: new- Tiltable steel guide plates- Rollers on bronze bearing bushes with oil circulation lubrication via pump- Rollers with new ball bearing slewing rings, make Maier, for connection to the water circuit to the water circuit- AC main motor: 132 kW - 400 V - 50 Hz- two Safety brake for EMERGENCY STOP- Roller tank made of stainless steel to hold the mixture-  ...

volt: 380 Vweight: 1,4 t: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 370 liter

PN-370l Mixer available Pneum. Hopper Gear Box 2 x 1050kW DC Motor with Inverter Feeding scale Oil scale Description attached!

Key data: 660 mm, 2100 mm

4 nos. Buzuluk 84" Mills available! Drilled Rolls, Rollerbearings, electrical Nip adj., Bullgear Drive 2 x left Hand Drive 2 x Right Hand Drive Description attached!

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,