Rubber injection presses used for sale (34)

Year of construction : 2011 Control CC200 Locking force 400 tons incl. various accessories ( Piovan cooling unit, Tooltemp cooling unit, vacuum pump ) Machine comes directly from production

clamping force: 2.700 kNinjection volume: 6.000 cm³screw diameter: -- mmplaten size: 560 x 630 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand, partially dismantled, but would be restored to its previous condition EUROMAP size 2500 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 2.700 kN- Platen size: 560 x 630 mm- Max. stroke: 550 mm (see data sheet) Injection unit:- Max. injection volume: 6,000 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 28,2 kW- Installed heating capacity: 49,9 kW- Weight: Clamping unit approx.: 6,040 kg Injection unit approx.: 2,700 kg Hydraulic un ...

110 Tons Press Machine 70-55 table size, 48-33 between colons with PLC Hydrolic

clamping force: 4.500 kNinjection volume: 3.300 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4000 – 7000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 3,300 cm³- Injection pressure: 2150 bar- Power supply: 3x 400 V, 50 Hz, N- Motor power: 35,5 kW- Installed heating capacity: 73,9 kW- Weight: Clamping unit approx.: 8,400 kg Injection unit approx.: 2,700 kg Hydraulic unit with oil and control cabinet 2,200 kg Additional equipment (approx.): 3,000 kg  ...

Desma Vertical Injection Moulding Machines Model Type D968 250 ZO ( S3 ) Stroke Volume 2000 cm3 Injection Pressure 1670 bar Platen 560 mm x 630 mm Extended Daylight 860 mm Top and Bottom Hydraulic ejectors 400 mm stroke Strip Intake Control With Vacuum Pump Years: 2014 / 2015

clamping force: 4.500 kNinjection volume: 5.600 cm³screw diameter: 610 - 985 mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 12300Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 610 - 985 mm (see data sheet) Injection unit:- Injection unit type: ADV- Max. injection volume: 5,600 cm³- Injection pressure: 2200 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Pump capacity: 27 kW- Weight: Cutting unit approx.: 10,200 kg Injection unit approx.: 3,500 kg Hydraulic unit with oil: 2,600 kg Accessories approx.: 4,700 kg Total weight approx.:  ...

Rutil Vertial Injection Moulding Machine Year of manufacture: 2001 Type: Injection Configuration: Vertical Clamping force: 350 tons Injection volume: 2000 cc Upper intermediate frame: Yes Lower intermediate frame: Yes Heater plate dimensions: 600×650 mm Tie bar distance: 600 / 340 mm Additional heating option: Yes Sliding plate: Yes

clamping force: 4.500 kNinjection volume: 5.000 cm³screw diameter: -- mmplaten size: 670 x 780 mmCondition: second-hand,Specification: rubber injection moulding machine - second-hand EUROMAP size 4500 – 10000Clamping unit:- Clamping unit: vertical- Clamping force: 4500 kN- Platen size: 670 x 780 mm- Max. stroke: 600 mm (see data sheet) Injection unit:- Max. injection volume: 5,000 cm³- Injection pressure: 2060 bar- Power supply: 3x 400 V, 50 Hz, N, PE- Motor power: 38 kW- Installed heating capacity: 67.5 kW- Weight:Clamping unit approx.: 8,900 kgInjection unit approx.: 3,200 kgHydraulic unit with oiland control cabinet 2,350 kg- For dimensions, see the installation data in the appe ...

Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

clamping force: 300 kNinjection volume: 180 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine for rubber - second-handClamping unit:- Clamping unit: vertical- Clamping force: 300 kN- Platen size: 300 x 300 mm Injection unit:- Maximum injection volume: 180 cm³- Mains supply: 3x 400 V, 50 Hz- Power rating: 11 kW- Control system: MAPLANThe machine is still in production and can be viewedin operation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

clamping force: 350 kNinjection volume: 170 cm³screw diameter: 36 mmplaten size: 380 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 350 kN- Platen size: 380 x 300 mm- Heating power of the plates: 6 kW- Clamping/opening stroke: 200 mm- Clearance between the plates: 250 mm- Clamping direction: from belowInjection unit:- Pressure: 1,050 kg/cm²- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Max. screw speed: 30–110 rpm- Metering stroke: 165 mm- Injection: from above- Voltage: 3 × 400 V, 50 Hz, N, PE- Pump drive power: 11 kW- Hydraulic motor power: 10 kW- Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm- Weight ap ...

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

clamping force: 800 kNinjection volume: 154 cm³screw diameter: 35 mmplaten size: 430 x 660 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 800 kN- Mould mounting area: 430 x 660 mm- Clamping/opening stroke: 450 mm- Maximum mould installation height without heating plates: 300 mm- Maximum plate spacing without heating plates: 750 mm- Clamping direction: from below- Ejector stroke: 130 mm- Ejector force: 40 kNInjection unit:- Increased injection pressure: 2,180 bar- Maximum injection volume: 154 cm³- Screw diameter: 35 mm- Screw length: 20D- Maximum screw speed: 20–400 rpm- Metering stroke: 160 mm- Injection: from above- Nozzle stroke:  ...

REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table

clamping force: 250 kNinjection volume: 134 cm³screw diameter: 35 mmplaten size: 300 x 300 mmCondition: second-hand,Specification: C-frame injection moulding machine - second-handClamping unit:- Clamping force: 250 kN- Heating plate dimensions: 300 x 300 mm- Heating power of the plates: 5.3 kW- Clamping/opening stroke: 330 mm- Platen distance with heating plates at maximum: 380 mm- Clamping direction: from below- Side ejector: yes- Stroke of side hydraulic ejector: 100 mm- Ejector stroke/force: 70 mm / 24 kNInjection unit:- Increased injection pressure: 1,580 bar- Maximum injection volume: 134 cm³- Screw diameter: 35 mm- Screw length: 17.1D- Maximum screw speed: 20–480 rpm- Metering stroke: 140 mm- Injection: from above-  ...

LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW

clamping force: -- kNinjection volume: -- cm³screw diameter: -- mmplaten size: -- mmCondition: second-hand,Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising3x machines, model SAD 114/30- Year of manufacture: 1999- Problems with the control system1x machine, model Super AD 76/15- Year of manufacture: 2006- Problems with the control systemThere are 3 machines built in 1999 and 1 machine built in 2006 available.The price is per unit. If you purchase several unitsa package price can be arranged.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

clamping force: 500 kNinjection volume: 76,5 cm³screw diameter: 32 mmplaten size: 360 x 335 mmCondition: used, as good as newSpecification: Injection moulding machine for LSR - Demonstration machine as good as new clamping unit:- clamping unit: horizontal- Clamping force: 500 kN- Opening stroke max.: 400 mm- Platen distance max.: 650 mm- Mould installation height min.: 250 mm- Clear width between the tie bars: 360 x 335 mm- Ejector stroke max.: 80 mmInjection unit SP 82:- Screw diameter: 32 mm- Screw L/D ratio: 16.3- Screw stroke max.: 95 mm- Injection volume max.: 76.5 cm³- Injection pressure: 1076 bar- Plasticising flow: 13 g/s- Injection flow:  ...

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

clamping force: 350 kNinjection volume: 58,5 cm³screw diameter: 28 mmplaten size: 260 x 254 mmCondition: used,Specification: injection moulding machine for TPE - usedclamping unit:- clamping unit: vertical- clamping force: 350 kN- opening stroke max.: 300 mm- platen distance max.: 500 mm- Mould installation height min.: 200 mm- Clear width between tie bars: 260 x 254 mm- Ejector stroke max.: 80 mm- Clamping unit: VV- Lift of protective bonnet: 500 mmInjection unit:- Screw diameter: 28 mm- Screw L/D ratio: 18.6- Screw stroke max.: 95 mm- Injection volume max.: 58.5 cm³- Injection pressure: 1577 bar- Plasticising flow: 8.6 g/s- Injection flow: 85.5 g/s- Connected load: 3x 400 V, 50 Hz- Max. heating power: 5.8 kW- Drive power: 7,4 kW- Total power:  ...

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

clamping force: 4.000 kNinjection volume: 2.700 cm³screw diameter: -- mmplaten size: -- mmCondition: used,Specification: Rubber Injection Molding Machine - second-handclamping unit:- Clamping force: 4000 kN- ejection device: 2-layer- Brush system: 2-layerInjection unit:- Injection volume max.: 2,700 cm³Two identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 600 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 2,250 kgTwo identical systems are available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 550 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-hand, Modell TTV-C40-125 C40P01Bclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 550 x 400 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 90A fuse protectionApprox. dimensions: 1,550 x 1,050 x 3,120 mmWeight approx.: 3,200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 400 kNinjection volume: 125 cm³screw diameter: -- mmplaten size: 300 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 40 t- clamping force: 400 kN- Heating platen size: 300 x 300 mmInjection unit:- Injection volume max.: 125 cm³- Connected load: 3x 400 V, 50 Hz 76A fuse protection (incl. peripherals)- Pump output: 7.5 kW, 14.9 A- Total output: 28 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmWeight approx.: 2,250 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 200 kNinjection volume: 80 cm³screw diameter: -- mmplaten size: 350 x 300 mmCondition: used,Specification: C-frame injection moulding machine for TPV - second-handclamping unit:- Clamping unit: vertical- Tonnage: 20 t- clamping force: 200 kN- Heating platen size: 350 x 300 mmInjection unit:- Injection volume max.: 80 cm³- Connected load: 3x 400 V, 50 Hz- Pump output: 11 kW- Total output: 44 kWDimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mmSpace requirement approx: 5 m²Weight approx.: 3.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 350 kNinjection volume: 59 cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: injection moulding machine for rubber - used International size: 350-90 clamping unit:- clamping force: 350 kN- clamping platen size: 400 x 400 mm- Clear distance between tie bars: 270 x 270 mm- Mould installation height min.: 225 mm- Distance between clamping platens: max. 550 mm- Opening stroke max.: 325 mm- Ejector stroke: 125 mmInjection unit:- Screw diameter: 25 mm x 20D- Injection volume max.: 49 cm³- Injection part weight: 59 g/hp- Max. injection pressure: 1,860 bar- Screw circumferential speed: 37 m/min- Cylinder heating: 4x 900 W- Nozzle heating:  ...

clamping force: 1.300 kNinjection volume: 230 cm³screw diameter: 45 mmplaten size: 685 x 685 mmCondition: used,Specification: injection moulding machine for TPE - usedincluding Koch dosing unitclamping unit:- clamping force: 1.300 kN- heating platen size: 685 x 685 mm- Clear distance between tie bars: 470 x 470 mm- Mould installation height min.: 250 mm- Distance between platens max.: 900 mm- Opening stroke max.: 650 mm- Ejector stroke: 225 mmInjection unit:- Screw diameter: 45 mm x 18D- Injection volume max.: 230 cm³- Injection part weight: 210 g/hp- Max. injection pressure: 1,670 bar- Screw circumferential speed: 75 m/min- Cylinder heating: 4x 2,200 W- Nozzle heating: 600 W- Connection value: 3x 400 V, 50 Hz- Electrica ...

clamping force: 450 kNinjection volume: 135 cm³screw diameter: 35 mmplaten size: 600 x 400 mmCondition: used,Specification: C-frame injection moulding machine for TPE - usedclamping unit:- clamping force: 450 kN- heating platen size: 600 x 400 mm- sliding table: yes- Clamping direction: from below- Ejector / lifter: Up + LoInjection unit:- Injection volume max.: 135 cm³- Screw diameter: 35 mm- Connected load: 3x 400 V, 50 Hz- Weight approx.: 5,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.