Rubber extruders used for sale (25)

Sale of spare parts of EEK 125.22 V, including vacuum cylinder, screw and V-pump, 6 x TCU, Power cabinet with FU 165 KW

screw ø:: 70 mmscrew length:: 22D screw speedl:: -- U/minCondition: usedSpecification: rubber extruder line – used COLMEC Extruder, Hot Air Channel, Cooling BathConsisting of:Extruder COLMEC 70 x 22D- Screw diameter: 70 mm- Screw length approx.: 22D- Extruder motor power: 37 kW- Cooling unit for extruderHot air oven:- Hot air oven power: 80 kW- Fan power: 2x 0.36 kW, 2x 1.5 kW- Stainless steel cooling bathThe system is in good condition and wasstill in operation until approx. 6 months ago- Sold as seen. The buyer is responsible for safety regulations. Without CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cold feed vacuum extruder Troester 90 mm x 18 D, with feed roller, drive 46 kW, pie speed 10 to 60 rpm, 5 TCU,

screw ø:: 60 mmscrew length:: 15D screw speedl:: -- U/minCondition: usedSpecification: rubber extruder – used- Screw diameter: 60 mm- Screw length approx.: 15D- Sold as seen. The buyer is responsible for safety regulations. No CE marking.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cold feed extruder - 60 mm x 18 D vacuum, with feed roller, drive 22 KW, screw speed 10 to 60 rpm, with gear pump, 5 TCU,

screw ø:: 60 mmscrew length:: 11D screw speedl:: -- U/mindrive power:: 18,5 kWCondition: used, reconditionedSpecification: rubber extruder – used- Screw diameter: 60 mm- Screw length approx.: 11D- New screw- Cylinder refurbishment- Feed roller refurbishment- New safety cage- New rotary joint for water- New AC motor: 18.5 kW- New control cabinet with Siemens S7-1200 PLC system- New control panel with Siemens KTP700 Basic touch panel- New Siemens G120 frequency converter for variable speed- Remote maintenance device- New cabling- Pressure sensors on the extruder head- Safety device- CE marking and an operating and maintenance manual in EnglishRefurbished in accordance with CE standard safety regulationsWarranty: 1 yearOption: TCU for temperature control of the water up to 95°C, for placement near the extruderThe data for thi ...

90s cold feed extruder, GE 90 x 16 D Vac, make Troester, with large hose / profile spray head, drive 52 KW Siemens AC, 4 TCU Siengle

screw ø:: 90 mmscrew length:: 16D screw speedl:: ca. 40 U/mindrive power:: 48,5 kWCondition: used, overhauled to order, including warranty, including CE markingSpecification: extruder – used with feed roller- Screw diameter: 90 mm- Screw length: L = 12D- Screw speed approx.: 40 rpm- Motor rated power: 48.5 kW- Belt drive, number of belts: 5- Number of heating/cooling zones: 4- Voltage: 3x 380V, 50Hz, NFor further details, please refer to the attachment.Price on request, depending on design and customer requirementsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

120 mm cold feed pen convert-extruder, GE 120 SC, make Berstorff, output capacity up to 1,000 kg /h as a power extruder with strip spray head, complete rebuild mechanically and electrically in 2024

screw ø:: 30 mmscrew length:: 16D screw speedl:: -- U/minCondition: used,Specification: Extruder - used- screw diameter: 30 mm- screw length: L = 16 D- with feed roller- Extruder water tempered,- Cylinder and head one tempering zone- Feed section can be cooled or heated- Flow rate adjustable- Screw compression approx.: 1:1.2- Spraying head for hoses and profiles- Various injection moulds are available- Extruder complete incl.: - Motor from Techno Drives, type: MD 321 MA Drive power: 5 kW, 360 V Motor current max.: 19.7 A N/max.: 1,750 rpm - Control cabinet mounted directly next to the extruder - Profile/tube extrusion head with clamp - Temperature control Extruder is mounted on a base plate- Mass pressure measurement and display available- Operating and display elements are installed in the switch  ...

Barwell Hydraulic Extruder – Used For sale: a used Barwell hydraulic extruder, designed for processing rubber compounds and elastomers. Barwell machines are well known worldwide for their robust construction, reliability, and consistent performance in industrial applications. The machine has been operated in an industrial environment, regularly maintained, and remains in good technical condition. Ready for further use after installation. Key features and advantages: Hydraulic drive ensuring smooth, stable, and precise extrusion Heavy-duty, solid construction for long service life Reliable operation, even with demanding rubber compounds User-friendly operation and easy integration into existing production lines Proven Barwell quality, widely trusted in the rubber industry Applications: Extrusion of rubber profiles and semi-finished products Preparation o ...

screw ø:: 90 mmscrew length:: 20D screw speedl:: 0 - 60 U/minCondition: NEW,Specification: Rubber vacuum extruder - with warranty- Screw diameter: 90 mm- Screw length: L = 20 D (approx. 1,800 mm conveying length)- Screw speed: 0 - 60 rpm- Centre height of extruder: approx. 1,125 mm incl. base frame- Max. permissible injection pressure: 500 bar- with feed roller- Extruder water-tempered- Extruder base frame as welded construction, to accommodate the extruder with drive motor, the temperature control, the vacuum pump- Funnel piece with intermediate flange: two tempering zones approx. 4D = 480 mm- Vacuum cylinder: three tempering zones BL = 1,057 mm- End cylinder: one temperature control zone  ...

AST 220 / POMINI-FARREL flat head / POMINI-FARREL 18"x15" Slabber / BANDERA Slabber. Refer to code 1043-1044-1045-1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

screw ø:: 120 mmscrew length:: 17D screw speedl:: 42 U/mindrive power:: 138 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!

screw ø:: für Extruder 90 mmscrew length:: -- screw speedl:: -- U/mindrive power:: 13,6 kWCondition: little used, as good as newSpecification: gear pump ZP 75/50 for extruder size 90- SEW helical gear units: R 97- Siemens direct current motor: 1 GG5 118- Drive power: 13.6 kW, 57 A- curved tooth coupling- With clamp for the head connection,- Clamping flange for extruder and head connection,- Base plate with linear guide rails,- Tooth shaft diameter: 75 mm- tooth width: 50 mm- helical gearing, hardened steel bearings, right-hand drive- without controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

available Troester Triplex Extruder Top machine QSM 90x 16D Middle machine 200W x 6D Below machine QSM 150 x 16D Head MW500 Description attached!

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Colmec 150mm Extruder Model: TGF 150/ 16D LD ratio 16:1 Screw length 2340mm Siemens Motor, 178kW, 1860rpm Hydraulically operated crosshead With Control cabinet With Temperature control unit Spare screw Year 2001

Key data: 215 mm, 304

Pomini 12” x 8.5” Dump Extruder Type 12/8.5 Year of Manufacturing: 1993 Conical screw 300mm 215mm diam. Pneumatic crammer feed with DC variable speed motor Pelletizing head Without controls

Key data: 50 mm

50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel