404 rubber machines used for sale

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

1 x Berstorff GmbH 250mm strainer extruder, Year of manufacture: 1988, L/D ratio 7:1, power roller feed (300mm wide), with 120kW, 1800rpm DC variable speed motor mounted on top of gearbox (belt drive), with tube head and knife at top for sheet extrusion. Complete with control panel etc and in very good condition.

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

1 x Buzuluk 240 litre Internal mixer Model: 14630, year: Dec 2008 (body and hopper), Batch size: 200 kgs, Drilled sides, Self sealing type dust seals, Oil injection, Hydraulic drop door with linear actuator and toggle latch, Stellite faced drop door, Two wing tangential rotors. 20in pneumatic hopper. 3 zone TCU Full unidrive gearbox (Make Skoda), with 630kW, 6000V, 739rpm, 73.5A slip ring motor and Oil filled starter. In very good condition.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls wit ...

Troester.200mm H/F strainer M/C Number 7175-71 L/D 6.5/1 Roller Feed 350mm. Hinged strainer head with hydraulic clamp. 125KW AC v/s motor. On single bedplate. With controls.

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

1 x Meccaniche Moderne 1500mm x 560mm dia two roll mill, Type: DUPLOCOM, Year 1984 but refurbished in 2001 to CE regulations. Peripherally drilled rolls, motorised nip adjustment (2.2kW to each roll), with 37kW, 1450rpm motor fitted to each roll, Friction ratio 1:1.24, Back roll speed 16.1rpm, front roll speed 12.9rpm, 3ph, 380V, 50Hz.

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

1 x Francis Shaw model K1 Intermix MK4, Installed new in 1991, fully maintained and checked over by HF in 2005. Net chamber volume: 5.5litres, pneumatic hopper, hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor and controls. Castell Key interlock system Complete and in excellent condition. Chamber and rotors are like new! O/a dimensions: 3m x 1.2m. Can be seen working. All manuals/documentation available.

1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Francis Shaw 45mm dia coldfeed rubber extruder, M/c no. 4513, Year: 1992, power roll feed, L/D ratio 15:1, hinged straight head with c\clamp, cored scred + jacketed barrel with built in temp control unit. Complete with control panel and in very good condition. Box of dies included.

1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.

1 x Werner & Pfleiderer 400mm dia dump extruder, Type: EAE400, Fabrik nr 221284, Werk nr 416295, Year: 1985, double hydraulic crammer feed, feed section 965mm wide, L/D ratio 8:1, with 235kW DC variable speed motor, Sheeting head to produce up to 1000mm wide sheet. Complete with controls and hydraulics etc.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

Francis Shaw 18/22\ Dump Extruder, Crammer feed Length of Screw 9ft 6\. Reliance 400hp D.C., 1150 r.p.m., 480 volt. Large Hopper/Chute to next floor level.