presses used for sale (1,820)

pressure: 55 tthroat: 200 mmstroke: 10-80 mmram - range of adjustment: 60 mmno. of strokes: 120 Hub/mintable surface area: 600x450 mmram surface: 290x230 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 195 mmstroke: 8-78 mmno. of strokes: 76-190 Hub/minram - range of adjustment: 60 mmtable surface area: 650x380 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: BxTxH 1450x1220x2110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 730x600 mmram surface: 540x360 mmtable height: 850 mmtool hole in ram: Ø40 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 2000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 595 x 410 mmram adjustment: 70 mmno. of strokes: 150 Hub/mintable adjustable in height: 240 mmtotal power requirement: 1,1 kWweight of the machine ca.: 1,45 tdimensions of machine L x W x H: 1,30 x 0,80 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

pressure: 110 tthroat: 290 mmstroke: 20-124 mmno. of strokes: 60 / 90 Hub/minram adjustment: 85 mmtable surface area: ca. 920 x 590 mmram surface: ca. 530 x 280 mmdistance table to upper part of the press: ca. 450 mmhole in the table: ca. 180 x 300 mm mmtable height: ca. 750 mmtool hole in ram: Ø 50 mmNumber of working hours: 8214 hdistance table to upper part of the press: mmweight of the machine ca.: 5,5 tdimensions: ca. 2000 x 2000 x 2600 mmoverhauled by the manufacturer Helmerding in 2014 including conversion to new onespress safety control.Operating hours read since overhaul in 2014: 8214Documentation of press safety control availableelectrical grease central lubricationHydraulic clutch-brake combinationMechanical break plate in the ramtwo-hand operationfoot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 tthroat: 185 mmstroke: 100 mmtable surface area: 380 x 350 mmdayligth: 250 mmtable height over floor: 840 mmtotal power requirement: 4 kWweight of the machine ca.: 1,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

pressure: 160 tdistance between columns: 850 mmstroke: 150 mmtable surface area: 850x650 mmtotal power requirement: kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,5 x 2,5 x 3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional

Hydraulic press

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block

very well preserved automatic machine with/without motor reel