presses used for sale (1,652)

Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded

- Minimum width 65 mm- Maximium width 185 mm- Load is 200 Metric Ton / Meter- Operation angle from 60 - 180 Gr- Die length 1000 mm and 500 mm sections

Segment radius top tooling for 1000 and 2000 Ton machineFull sets segmented on 835 mm and 10 sections to make 8000 mm- Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35- Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42- Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50- Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58- Radius 60 / Radius 62 / - Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80-   

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeiten und schnelle Umrüstzeiten ausgelegt ist. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 kombiniert diese Gebrauchtmaschine bewährte SAFAN-Qualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten.Was das für Sie bedeutet- Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bewältigen eine breite Palette von Teilen in Stahl, Edelstahl und Aluminium.- Genauigkeit über die volle Länge. Wila CNC-Bombierung und eine Einlauftiefe von 400 mm sorgen für gleichbleibende Winkel und reduzieren Nacharbeiten.- Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugklemmen besc ...

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeit und schnelle Umrüstungen entwickelt wurde. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 vereint diese Gebrauchtmaschine die bewährte SAFAN-Bauqualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten. Was das für Sie bedeutet - Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bearbeiten ein breites Spektrum an Teilen in Stahl, Edelstahl und Aluminium. - Genauigkeit über die gesamte Länge. Wila CNC Crowning und eine Ziehtiefe von 400 mm helfen, konstante Winkel zu halten und Nacharbeit zu reduzieren. - Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugspannu ...

- Rebuild in 2010 with SIEMENS TOUCH- Rebuild cost EUR 200.000- Distance measuring device with double taster- Big package with pressing tools in several diameters

Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction- Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal- Build in height 2950 mm- Maximum die height 1500 mm- Movable Table & Piston in X-Ways- Large package Die tooling radius 10/20/30/50/60/80/100 - Pressing force 210 kg/cm2- Maximum stroke 800 mm- Machine 2350 mm placed in ground 

- CNC Crowning- Hydraulic tool clamping- EFL Easy form laser measuring & correction system- Set Tooling - Laser guide protection- Controlled axis Y1/Y2/X/R/V-Axis

- CNC Crowning- Hydraulic tool clamping- EFL Easy form laser measuring & correction system- Set Tooling - Laser guide protection- Controlled axis Y1/Y2/X/R/V-Axis

- Closing force up to 18000 Kg- Opening force up to 15000 Kg- Driven table in & out feed- Upper table 270 Gr- Upper size 900 x 550 

- Work load 7000 Kg- Rotation table load 3500 Kg- Table height over floor 665 mm - Upper mould half can be freely swiveled out up to 180 Gr.- Lower mold half can be swiveled hydraulic using push button- Lower mould tiltable 2 sides- Optimum handling, free working positions- All movements are hydraulic controlled 

- Table load sliding table 20000 Kg- Table load upper table 9000 Kg- Table out feed stroek 2100 mm- Column diamater 180 mm- Closing force 1500 Kn- Opening force 700 Kn- Laser safe CE Safety- Power 15 kW 

- Decoiler- Max. width 350 mm- Clamping area coil internal  mm- Coil diameter 1500 mm- Work load 1000 Kg - Straigtner- Width 250 mm- Roll diameter 30 mm- Number off rolls 21 units- Working speed 40 M/Min - Max. thickness 6 mm at 240 N/mm2- Max. Thickness 5 mm at 400 N/mm2

- Long stroke CNC Press brake- 8 Axis controlled- ASTRO 50Y AMADA Robot- ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot.- When machining medium / fine thick and large dimension parts.- Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers.- Programming has become particularly easy through EASY CAM software- Safety CE Fence around machine and tobot

- C-Frame construction- Die height 850 mm- Thickness bolster plate 100 mm- Throath C Side 360 mm-  

- Pressure 0 - 250 Bar- T Size T-22- Opening force 35 Ton- Closing force 150 Ton- Distance between column 2130 mm- Table height over floor 770 mm- Upper table rotation 180 Grad

- Table size 3500 x 2500 mm- Siemens Simatic OP7 controller- Max. work load 80 Ton- New price 1 Mil EUR- Working force up to 250 Bar- Power 30 kW

Key data: 80 t, 400 mm, 112 mm

Printing capacity: 80 ton Table surface: 750 x 550 mm Plunger adjustment: 80 mm Stroke length: 8 - 112 mm Stroke rate: 78 p/min. Projection: 400 mm Equipped with: - Air coupling - Safety screen Country of origin: Germany Motor power: Machine LxWxH: 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

pressure: 25 tstroke: mmtable surface area: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: WPCapacity: 25 TDistance between columns: 760 mmDistance between cylinder and table: 950 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mBrand: LVDType: PPEB 320/40CNC brand: MorrisCNC model: Solutions ESA 630Year of make: 1990HydraulicCapacity: 320 TBend length: 4.000 mmMulti V + J-kniveSteered backstop X+RIncl. 1 Set of toolsMachine weight: 25.000 kgMachine is flat on the groundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 140 tchamfer lenght: 3000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2010012Type of machine PressbrakeMake COLLYType 3000/140Build in nbChamfer lenght 3000 mmPressure 140 tonStroke 250 mmThroat 310 mmDaylight 520 mm Additional informationincl. 1 set of toolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

ZTS KOSICE LEK 160 eccentric press was built in 1984 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is used in cold metal forming. It is capable of performing operations such as precise punching, stamping and bending. All these machining processes are performed with a high press force of 160 tonnes, which, combined with a very dynamic slider, guarantees the best machining results. The slider makes between 32 and 50 strokes per minute and its stroke is adjustable in the range from 25 mm to 160 mm. The ZTS KOSICE LEK 160 is also distinguished by its very rigid C-shaped design, which offers excellent process stability during even the most intensive challenges. The work table with a length of 1000 mm and a width of 740 mm enables mounting of both larger workpieces and tools. All this makes the offered LEK 160 eccentric press an excellent choice for the producti ...

Used eccentric press from VSS type LE 250 C. Year of manufacture 1979. General renovation 2016 Specifications: Nominal shaping force 250 T Desktop dimensions 1120 x 800 mm Maximum slider stroke 30 mm Slider sizes 800 x 475 mm 110 mm slider adjustment Clamp height 360 mm Main motor power 20 kW Dimensions: L x W x H 1350 mm x 2550 x 2915 mm Machine weight 12880 kg

NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...

ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...