presses used for sale (1,705)

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 2000 mm  height above floor level: 540 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 460 mm/s  working velocity min.: 25 mm/s  working velocity max.: 44 mm/s  return velocity max.: 460 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mmELECTRICAL SPECIFICATIONS  total power consumption: 180 kWDIMENSIONS / WEIGHTS  total weight approx.: 95000 kgATTACHMENTS (PRESSES)  press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes  & ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 75 toPRESS TABLE  table surface (left-right): 1250 mm  table surface (front-back): 1110 mmSLIDE  table surface (left-right): 960 mm  table surface (front-back): 750 mmSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke adjustment: yes   stroke min.: 10 mm  stroke max.: 50 mm  stroke rate (min.): 120 /min  stroke rate (max.): 600 /minSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 300 mmELECTRICAL SPECIFICATIONS  total power consumption: 15.5 kWDIMENSIONS / WEIGHTS  total weight approx.: 13500 kgATTACHMENTS (PRESSES)  strip feeder: yes   feeder type: roll feeder

PRESS FORCES  total force (nominal): 100 toPRESS TABLE  table surface (left-right): 950 mm  table surface (front-back): 660 mm  thickness of bolster plate: 68 mmSLIDE  table surface (left-right): 540 mm  table surface (front-back): 450 mm  spigot hole diameter: 60 mm  stroke: 130 mm  stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 370 mmDIMENSIONS / WEIGHTS  total weight approx.: 7000 kgLocated in Barcelona - Spain

pressure: 63 tdistance between columns: 360 mmstroke: 400 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1.8x1.6x2.7 mwww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max. ...

Key data: 100 t, 3000 mm

Hydr. CNC Press Brake AMADA 3m, 100 ton without tools !

CONTROLS  PC controller BECKHOFF C 6140 PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 410 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 8 mm/s  working velocity max.: 80 mm/s  return velocity max.: 150 mm/sCOUNTER RAM  nominal force: 120 to  stroke: 40 mmV-RING  nominal force: 250 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 820 mm  lower table (front-back): 1250 mm  upper table (left-right): 820 mm  upper table (front-back): 1250 mm  shut height max.: 410 mmSTRIP-FEEDER  feeder t ...

pressure: X ttable-size: 550x390 mmthroat: 550 mmmagnetic plate size: 250x100 mmweight of the machine ca.: 0.25 tMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS  PLC BECKHOFF PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 67 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 125 toV-RING  nominal force: 125 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 560 mmSTRIP-FEEDER  feeder type: roll feeder DIMENSIONS / WEIGHTS  total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet  ...

CONTROLS  PLC SIEMENS S7 300 PRESS DESIGN  drive system: hydraulic PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  height above floor level: 700 mmSLIDE  table surface (left-right): 2000 mm  table surface (front-back): 2000 mm  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 400 mm/s  working velocity min.: 5 mm/s  working velocity max.: 160 mm/s  return velocity max.: 300 mm/sTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1700 mm  distance between columns (H-frame): 2100 mmELECTRICAL SPECIFICATIONS  total power consumption: 370 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS /  ...

CONTROLS  PLC SIEMENS S7-400 PRESS DESIGN  drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES  total force (nominal): 1000 toPRESS TABLE  table surface (left-right): 2066 mm  table surface (front-back): 2000 mm  height above floor level: 630 mmSLIDE  stroke: 900 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 600 mm/s  working velocity min.: 15 mm/s  working velocity max.: 40 mm/s  return velocity max.: 390 mm/s  return force: 100 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1710 mm  distance table - slide max.: 1700 mmELECTRICAL SPECIFIC ...

PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 72 /minCOUNTER RAM  nominal force: 40 to  stroke: 60 mmV-RING  nominal force: 50 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 470 mm  lower table (front-back): 470 mm  upper table (left-right): 500 mm  upper table (front-back): 470 mm  shut height max.: 277 mm  ram adjustment: 80 mm  distance between columns (H-frame): 500 mm  passline opening (free passage in side columns): 220 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  feeding step max.: 180 mmELECTRICAL SPECIFICAT ...

CONTROLS  PLC SIEMENS S5 SLIDE  total force (nominal): 160 to  stroke: 60 mmCOUNTER RAM  nominal force: 80 toV-RING  nominal force: 80 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 600 mm  shut height max.: 335 mm  ram adjustment: 125 mm  distance between columns (H-frame): 630 mm  passline opening (free passage in side columns): 270 mmCROP SHEAR  cutting force: 150 kNDIMENSIONS / WEIGHTS  total weight approx.: 11000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machine !2016 Overhaul by Fei ...

max. pressure in kg: 6000

Technical dataPressure: 4.5 kNTable surface:Length: 170 mmWidth: 145 mmDepth of throat: 100 mmOverall dimensions machine:Length: 380 mmWidth: 300 mmHeight: 700 mm

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

nominal force - 4000 kN table - 1250x825 mm

Key data: 63 t, 500 mm

table - 750x560 mm lower ejector

The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.

This HIDROLIKSAN PH4C 200T hydraulic press was manufactured in 2015. It features a robust press force of 200 tons and a large table measuring 1800x1400 mm, ideal for various pressing applications. Consider the opportunity to buy this HIDROLIKSAN PH4C 200T hydraulic press. Contact us for more information.

This Sangiacomo T.450 RCE Bending machine was manufactured in the year 2018 in Italy and has 7062 production hours. It is equipped with a Siemens Simatic HMI control unit. The machine has a pressing force of 4500 kN, is in excellent condition, and has low hours.

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

Inv. Num. : 8723 Type: PREU 100 Producer: Kieserling Solingen Created: 1971 Parameters: Compressive force: 100 t

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

I am selling this machine. It can be tested when connected. The machine is located in the Czech Republic. Very good condition. Price includes dismantling and loading. Rated deformation force 400 t Working area of table 3100 x 6000 mm Max. ram stroke 1000 mm Clearance between columns 3100 mm Output of main motor 15 kW Height of the machine 4170 mm Widht of the machine 4150 mm Lenght of the machine 6000 mm Weight of the machine 44190 kg

Key data: 250 t

Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg

Inv. Num. : 8643 Type: LEK 250 Producer: ZTS Generated: GO Parameters: Compressive force: 250 t

Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg