presses used for sale (1,627)

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Control: Siemens S5

Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

Key data: 125 t

Single-column press – manufacturer Durendus – 125 t servo press – table 2200 × 750 mm For sale is a hydraulic C-frame servo press from the manufacturer Durendus with an adjustable press force of up to 125 t and an integrated 50 t ejector. Thanks to modern servo hydraulics, the machine offers significantly reduced energy consumption of up to 40% compared to conventional systems and is ideal for demanding assembly, forming and production processes. = Technical data + information: Hydraulic servo press – C-frame – 125 t General information - Manufacturer: Durendus - Model: Single column press / servo press - Type: C-frame press Laobqcjx Aqtqotxvoa - Press force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm Table &  ...

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

Offer 25275 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2200 kg

Offer 25274 Hydraulic – single-column press with drawing cushion Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - Drawing cushion 10 t - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2400 kg

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

Offer 26015 Technical data: - Max. pressing force approx. 160 t - Max. ram stroke approx. 300 mm - Double-acting cylinder with hydraulic return - Max. retraction force 110 T - Stand width approx. 1540 mm - Table width 1500 mm - Table depth 1000 mm - Table height 590 mm - Max. installation height approx. 850 mm - Drive 400 V / 11 kW - Space requirement with unit approx. W 2350 x H 2200 x D 1750 mm - Weight approx. 3500 kg

Key data: 40 t, 1280 mm, 900 mm

For sale is a spotting press from the manufacturer REIS with a maximum pressing force of 40 t. The machine has a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm and a stroke of up to 1,100 mm, making it suitable for spotting work, coordination processes and tool adjustments in mold and tool making. Technical data + information: Spotting press – 40 t – 1,280 × 900 mm General information - Type: 4-column press - Manufacturer: REIS - Year of construction: 1984 - Press force: 40 T (adjustable) - Restoring force: 20 T - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (WxDxH): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Hydraulic cylinders - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm  ...

Key data: 40 t, 450 mm, 160 mm

Press force 400 kN , table 450x560 , ram 375x300 , distance table joints 340 stroke 160 , puncture hole 100 diameter, silky column passage 220x410

Key data: 300 t, 2 mm, 600 mm

Pressure: 300 tons Distance between the uprights 1800mm Side passages: Yes Installation height: 1000mm Table: 1800x1000mm Plunger: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemes S7 Controller Ground-level installation Sick Light Barrier Cushion: Stroke 200mm

Press brake Amada Astro HDS 1030 / NTR BJ 2010

A hydraulic press brake Steiner is available. Power: 30kW, max. pressing force: 300Mp, passage width: 2550mm, max. stroke: 240mm. Machine dimensions X/Y/Z: approx. 2700mm/2350mm/3450mm, weight: approx. 21000kg. An on-site inspection is possible.

A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible.

Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic thermoforming press with integrated drawing pad function for forming processes, drawing work and precise sheet metal processing. Base price: 76000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. T-slots and drilling patterns according to customer specifications Ad ...

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

Key data: 300 t

For sale is a hydraulic gantry straightening press (H-frame) from the manufacturer Durendus with a maximum pressing force of 300 T. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm and a stroke of up to 600 mm, making it particularly suitable for straightening, tuning and heavy forming work in industrial use. Technical data + information: Hydraulic gantry straightener – H-frame – 300 t 1,500 × 2,000 mm General information - Name: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Press force: 300 T (adjustable) - Distance between the stands: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from the ground: 950 mm - Plunger extension: 200–400 mm - Total weight: approx.  ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton