presses used for sale (1,704)

: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 tno. of strokes: 50-250 Hub/minsheet width: 250mm mmstroke: 8-120 mmram - range of adjustment: 100 mmtable surface area: 1600x800 mmram surface: 1600x800 mmhole in the table: 1100x250 mmtable height: 1000 mm: 370 mmweight of the machine ca.: 24 tdimensions of the machine ca.: BxTxH 3900x2500x3800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 310 mmstroke: 30-120 mmno. of strokes: 20-60 Hub/minram - range of adjustment: 90 mmtable surface area: 820x600 mmram surface: 550x430 mmhole in the table: 330x200 mmtable height: 750 mmtool hole in ram: Ø50 mmweight of the machine ca.: 9,5 tdimensions of the machine ca.: BxTxH 2500x2500x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 tthroat: 240 mmstroke: 12-84 mmno. of strokes: 135 Hub/minram - range of adjustment: 70 mmtable surface area: 600x450 mmram surface: 360x180 mmhole in the table: 220x130 mmtable height: 630 mmtool hole in ram: Ø35 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1500x2000x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 tstroke: 8-40 mmno. of strokes: 120-600 Hub/minram - range of adjustment: 40 mmtable surface area: 380x240 mmram surface: 220x140 mmhole in the table: 220x110 mmtable height: 910 mmtool hole in ram: Ø 30 mmthroat: 135 mmtotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: BxTxH 1000x1500x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 375 mmstroke: 20-125 mmno. of strokes: 60 Hub/minram - range of adjustment: 80 mmtable surface area: 920x660 mmram surface: 700x450 mmhole in the table: Ø90 mmtool hole in ram: Ø50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 2100x1500x3300 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 260 mmstroke: 8-100 mmram - range of adjustment: 63 mmno. of strokes: 115 Hub/min: 316 mmtable surface area: 630x490 mmram surface: 315x260 mmhole in the table: Ø 140 mmtotal power requirement: 4 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet thickness - max.: 8 mmpressure: 200 tchamfer lenght: 3200 mmengine output: 15 kWreturn speed: 105 mm/minworking feed: 9 mm/secx-travel: 600 mmMax. opening height: 570 mmcontrol: DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press BrakeCNC axis accuracy1) Machine sliders (Y1, Y2) – synchronisation precision:The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision.Positioning accuracy: ±0.02 mmRepeatability: ±0.02 mm2) Machine backgauge (X axis):The forward/backward mo ...

throat: 350 mmstroke: ca. 400 mmram diameter: 95 mmpress capacity: 25 ttable depth: 450 mmtable width: 1.500 mmtable height: 900 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,0 x 2,0 x 2,3 mStraightening Press - Single ColumnMÜLLER - CR 25.2.1- Power-On Hours: 543h- incl. working lampThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 3550 mmcolumn daylight: 3050 mmcolumn arm: 400 mmstroke of ram: 200 mmControl: Cybelec DNC 70 power capacity: 15 kWweight: 9500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 4050 mmdistance between columns: 3700 mmControl: CybTouch 15 weight: 13.000 kgrange L-W-H: 5000 x 2700 x 2500 mmEquipment:- controlled axes: Y1, Y2, X, R, Z1, Z2, BH1, BH2- Lateral safety guards- Light barrier in front of the machine- Parking space for bending aids- foot switch- Protective grille behind the machine- Die displacement- Hydraulic upper and lower tool clamping- WEINBRENNER tool holder- hydr. crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmtable width: 140 mmtable height: 750 mmtotal power requirement: 8 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manual back stop• upper and lower tools• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20.0 tchamfer lenght: 850 mmdistance between columns: 850 mmback stop - adjustable: 375 + 400 mmstroke of upper beam: 196 mmdayligth: 470 mmajustment speed: 200 mm/sectable height: ca. 900 mmtotal power requirement: 5.0 kWweight of the machine ca.: 2500 kg New price ~ 85.000 euros well-kept / very good condition () with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil- in checked condition - machine video -https://www.youtube.com/watch?v=foxzKIA7vX8Description :High performance, fast travel speeds and the best ergonomicsthis bending machine to a perfect tool in terms of productivity andAccuracy.This allows an unrivaled high productivity in the field of small andmiddle bending parts can be achieved, since even complicated bending sequencesseveral stations can be processed very quickly.A large number of different and universally ...

pressure: 80.0 tchamfer lenght: 2550 mmdistance between columns: 2130 mmcolumn arm: 420 mmajustment speed: 100 mm/secworking feed: 10.0 mm/secreturn speed: 80.0 mm/secstroke: 200 mmdayligth: 470 mmtable width: 60.0 mmtable height: 910 mmNumber of working hours: ca. 37.102 htotal power requirement: 9.0 KWweight of the machine ca.: 5750 kgrange L-W-H: 3100 x 2180 x 2540 mm good / well-maintained condition ()- Inspected condition - Machine video -https://www.youtube.com/watch?v=fwdjSiQYq_AEquipment:- CNC electro-hydraulic press brake- OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2- CNC-controlled backgauge adjustment (X-axes)- CNC-controlled vertical adjustment of the stop fingers (R-axes)- CNC-controlled left-right adjustment of the stop fingers (Z-axes)- Freely movable two-hand control & foot switch- Tool crowning - AMADA type- Various tools- CE marking- Side guards ( ...

pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmthroat: 200 mmtable width: 140 mmtable height: 750 mmdistance table - lower edge of ram: 300 mmmax. ram stroke: 100 mmclosing speed: 9 - 160 mm/secreturn speed: 55 mm/secvoltage: 380 V / 50 Hzengine output: 4,1 kWtotal power requirement: 5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manuel back stop• upper and lower tools Split , lower tool 2000 mm long• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.