planing machines used for sale (515)

Stroke speed cut/return: 80m/min, feed cross support/long support: 27mm/stroke, table dimensions X/Y: 4000mm/1250mm, max. table load (table center): 2000kg, tool holder: planing steels with rectangular cross-section, tool dimensions X/Y: 50mm/50mm, bed length: 9400mm, planing length: 4500mm, planing width: 1520mm, planing height without/with cross support: 1310mm/1250mm, connected load: 64kVA. Total system dimensions X/Y/Z: approx. 10000mm/3300mm/2500mm, weight: approx. 26000kg, foundation weight: 60000kg. The machine was electrically re-equipped in 1986. Documentation available. On-site inspection is possible.

Key data: 510 mm

Rex Trainers Surface planing machine Type A 510/3 Machine No. 18.752 Year of manufacture 1980 Working width 510 mm 2 knife shaft Slit table lips Chip removal 6.5 mm Table length 1550 mm + 1180 mm Stop length 1000 mm, height 140 mm Swivel stop Blade shaft speed 5500 rpm. Motor power 4.0 kW Extraction connection diameter 140 mm Weight with pallet 635 kg Dimensions 2800 mm x 950 mm x H 1000 mm

Weinig Uniplan Hydromat with jointer 220mm

Superset NT 31 with 14 axis control and 1000 programs Feed rollers in front of the dressing spindle Position 1 - Dressing spindle Position 2 - Right spindle with 2 axis ( up / down ) Position 3 - Left Spindle Horizontal Top with 3 Axis (Up/Down and Diameter Setup) Position 4 - First Horizontal Spindle with 2 Axis (On/Off and Diameter Setup) Up/Down Coupled with Position 5 Position 5 - Second Lockers Horizontal Top with 3 Axis ( Up/Down and Diameter - Setup ) Position 6 - Second Spindle Horizontal Bottom with 2 Axis ( Up / Down ) Motors 6 x 7.5 KW Feed Continuously variable from 6 to 36 rpm with 4 KW Feed roller before and after position 2 Vertical Right with axis control ( on / off ) Planer heads 5 pieces on position 1-2-3-4-5 type. TERSA

Number of spindles: 5 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2000 mmFeed motor: 1,1 kWFeed speed: stufenlos regelbar 2 - 12 m/min.1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table----------------------------------------------------------------- -------------Machine is functionally tested before deliveryTechnical manufacturers description:--------------------------------------Working width: 20 - 230 mmWorking height: 8 - 120 mm1st spindle horizontal, bottom---------------------------------------Motor with brake: 5.5 kWDiameter 40 mmSpeed 6000 rpmTool radius 125 - 145 mmAxis adjustment range 5 mmFolding device including rebate cutterMarathonCoating for table insert before and after the 1st lower spindle2nd spindle vertical, right---------------------------------------Motor with brake: 11 kWCommon motor with left verti ...

Key data: 4 , 180 mm, 105 mm

Profiset 40 EP with 2 axis control and 99 programs Finished size maxi. 180.mm / mini. 25.mm Engines. 2 x 7.5 KW 380 V. 50 H. Dressing table 2300 mm Feed roller in front of the dressing room 4 x planer heads TERSA Suisse 1st year warranty after delivery and commissioning

Number of spindles: 5 St.Working width: 250 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER-------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carrier motor-controlled- Additional motor-controlled positioning:right spindle radial and axialleft spindle axial- working width 250 mmTECHNICAL DATA-------------------------------Working width (perimeter of tools 163 mm) 15 - 230 mmWorking height(perimeter of tools 163 mm) 10 - 150 mm(perimeter of tools 123 mm) 10 - 160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pi ...

Planer and moulder with grinding unit Position 1. Abricht Spindel Position 2. Right Vertical Spindle Spindle Position 3. Left Vertical Spindle Position 4. 2. Right Vertical Spindle Position 5. 2. Left vertical spindle Position 6. Upper Horizontal Spindle Position 7. Bottom Horizontal Spindle Position 8. Grinding unit at the top Position 9 Grinding Unit Bottom Position 10 Universal Spindle

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

Number of spindles: 5 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 6-24 m/min.Control: K2 Basic 7-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER -------------------------------LIKE NEW, showroom machine !- 5 spindles: bottom, right, left, top, bottom- Speed: frequency-controlled 4,000 - 6,000 rpm- Width and height motor-controlled:left spindle radialupper spindle axial- Feed carriage motorized adjustmentTECHNICAL DATA in Detail-------------------------------Working width (for tool diameter 125-163 mm): 15-230 mmWorking height (for tool diameter 125 mm): 10-160 mm(Tool diameter up to 163 mm): 10-160 mmMin. workpiece length:single piece: min. 800 mmpiece by piece: min. 300 mmThe processing of the work pieces is depending on thefollowing operating parameters:material, wood moisture, tools, diameter of the chip removaland f ...

x-travel: NA mmy-travel: NA mmworkpiece height: mmstroke length max.: 450 mmtable length: 450 mmtable width: 350 mmtotal power requirement: 1,7 kWweight of the machine ca.: tdimensions of the machine ca.: mShaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4 , 23 mm, 10 mm

Exhibition machine! Working width (mm): 23 - 180 Minimum workpiece length (mm): 300 Feed speed (r/min): 6 - 12 Engine: Feed: 0.7/1.1 kW (1/1.5 HP); Horizontal spindle (single): 7.5 kW (10 hp); Vertical spindles (single): 7.5 kW (10 hp) Speed (r/min): 6000 Spindle ø (mm): 35 Feed table length (mm): 1700 Working height (mm): 10 - 105 Suction nozzle ø (mm): 120

Key data: 5 , 260 mm, 160 mm

Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V

Key data: 520 mm, 1750 mm, 4 St.

Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°

Number of boring spindles: 4 St.Working width: 220 mmWorking height: 120 mmLength of the planing table: 2.000 mmFeed motor: 1,5 kWFeed speed: 4,5 - 27 m/min.total power requirement: 15,5 kwDimensions (L/W/H): 3.700 x 1.500 x 1.300 mmweight of the machine ca.: 1.600 kgturning speeds: 6.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 8 St.Working width: 20 - 230 mmWorking height: 8 - 120 mmLength of the planing table: 2.500 mmFeed motor: 4 kWFeed speed: 5 - 24 m/min.total power requirement: ca. 60 kwDimensions (L/W/H): mmweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 2850 mm, 3 St.

Power connection 400V 4.0kW Planing width 500 mm Extraction 1x140 mm Stop angle adjustment 3-knife shaft with strip planer blades WxDxH: 2850 x 910 x 940 mm Weight approx. 750 kg Workshop overhauled

Key data: 630 mm, 300 mm, 9 kW

EXHIBITION MACHINE Weight 950 kg Voltage 3 x 400 V Engine power (S6) 9.2 kW / 12 hp Dust extraction connection 160 mm Diameter knife block 120 mm Number of knives 4 Dimensions knife 630 x 30 x 3 mm Max. cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 – 300 mm Dimensions thickness planing table 1160 x 630 mm 8D9Qxjdewy Variable feed speed 5 – 22 m/min. Diameter of feed rollers 70 mm incl. TERSA. Knife shaft Image includes optional accessories

Key data: 4

EXHIBITION MACHINE Specifications: - Max. dimension (WxH) Finished part 180x105mm - Working width min. 23mm - Working height min. 6mm - Long min. single workpieces 300mm - Feed speed 6 - 12m/min. - Spindle speed 6,000 rpm. - Spindle diameter 35mm - Usable length horizontal spindle 190mm - Usable length vertical spindle 120mm - Adjustment of feed table and infeed guide 10mm - Horizontal spindle tool diameter 100mm - Min./Max. tool diameter Verticel spindle 100/124mm - Roll forming option Verticel spindle 12mm - Unit adjustment range for the planing heads +/- 1mm - Motor power horizontal spindle 7.5 kW - Motor power Verticel spindle 7.5kW - Motor power feed 0.75 / 1.1 kW - Length of material feeding table 2300mm - Diameter of extraction hoods 1x150mm, 2x120mm

Key data: 4 , 180 mm, 120 mm

Connected load 380V 46A Planing width 180 mm Planing height 120 mm Length of mounting table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds Electric height adjustment 4x star-delta switch 2x Low Pressure Holder Iewdlj0 1x Side Pressure Holder 2x steel feed shafts 1x rubberized pull-out roller Extraction connection 4x120 mm Workshop overhauled

Working width: 630 mmWorking height: 3 - 250 mmMotor output: 7,5 kWFeed speed: 7 und 14 m/min.Dimensions (length / width): 2700 x 1700 mmweight: ca. 1.450 kgDust suction hood: 2 x 160 mmCOMBINED PLANNING AND THICKNESSING MACHINE 546|100Manufacturer descriptionSolid German mechanical engineeringConvenient planing and thicknessing without machine conversion, dimensionally stable andprecise dressing tables, as there is a folding upomitted, for planing widths up to 630 mm and dual operation up to 315 mm eachPANHANS solid steel cutter block with 4 Tersa reversible knivesSURFACE PLANE:Table length 2555 mm, planed with toothed table lipsElectromotive adjustment of the feed table via button with digital displaythe chip removal max. 5 mmDressing fence can be inclined up to 45°, in an extremely smooth-running steel guidestoredDressing ruler, anodised, with swiveling auxiliary stop 1545Bridge prot ...

Number of spindles: 6 St.Working width: 230 mmWorking height: 160 mmLength of the planing table: 1050 mmFeed motor: 7 kWFeed speed: 6-40 m/min.Weinig Powermat 1200------------------------------------------------------------------ -----with infeed automation Weinig wheel magazine EM 100 and linkedwith outfeed automation Weinig High-Mech A 1The machine will be completely checked in our warehouse before delivery!Detailed description:---------------------------------------------------------- -------------1. Weinig planer and moulder Powermat 1200------------------------------------------------------------------ -----Technical data:------------------------Working width 20 - 230 mm (with tool flight circle 93 - 163 mm)Working height 10 - 160 mm (with tool flight circle 93 - 163 mm)1. Spindle-----------------------------First lower horizontal spindleMotor with brake 7.5 KWSpindle diameter 50 mm ...

Weibert FS32 Spiral Dressing thickness planer FS32 Dressing Thickness Planer with Spiral Knife Shaft Weibert FS32 Planing width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 Special price: OPTIONS AT EXTRA COST: Slotted Hole Drilling Device Wescott Drill Chuck 0-16mm Driving equipment Dressing table extension adjustable 750mm

2 KW, 400 V, 50 Hz, 3-knife shaft 250 mm, Chip removal max. 3 mm, Thickness height max. 180 mm, Dressing tables each 525x255 mm, Thickness table 600x250 mm, Dressing stop adjustable up to 45°, Suction nozzle 100 mm, Weight 147 kg

Key data: 6 , 200 mm

Front side planer / automatic planer

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Weibert SD 510 Dressing thickness planer including 4-tersa knife shaft Planer width 510mm Dressing table length 2250mm Planer fence 1500 mm 90°-45° Machine Grey Cast Iron Tables 5.5 KW (7.5 HP) 400V Thicknessing table 1050 x 510mm Passage of 250mm Numerical display thickness table Electric height adjustment of the thickness table 2 infeed speeds 6 & 12 m/min Dual folding system of the tables to the rear Weight of 900 kg G&RO-SD510NE-TER

Number of spindles: 6 St.Working width: 230 mmWorking height: 120 mmLength of the planing table: 2500 mmFeed motor: 4 kWFeed speed: 5-24 m/min.total power requirement: 27 kwDimensions (L/W/H): 3900 x 2200 x 2000 mmweight of the machine ca.: 2500 kgWeinig four-side planer Profimat 23 window version withglazing bead removal,ATS control and program control-------------------------------------Machine will be checked !Technical data summary(please inquire about any additional accessories included)-------------------------------------Generally--------------- ----------------------> Working width: 230 mm> Working height: 120 mm> Number of spindles: 6 pieces.> Dressing table length: 2500 mm> Feed motor: 4 kW> Feed speed: 5-24 m/min> Total power requirement: 27 kW> Dimensions: 3900 x 2200 x 2000 mm> Machine weight, approx.: 2500 kgSpindle arrangement-------------------------------------> Spindle  ...