planing machines used for sale (515)

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

Weibert PS 63 Tersa Thickness Planers Planing width 630 mm Dimensions thicknessing table 630 x 1000 mm Depth of cut of Max 8 mm At least 210 mm working length Working height of min. 3.5 mm Working height of Max 300 mm Blades number 4 PCs. Drum diameter 120 mm Drum speed 4500 min-1 Feed rate 5/8/12/18 m / min Electrical connection 400 V / 50 Hz / S6-40% Motor power 9.0 kW Dust nozzle diameter 150 mm Dimensions (L x W x H) Weight 750 kg G & PIECES-5220164

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

VakkuCar3 Bench Planer Modern mobile workstation with vacuum clamping device and height adjustment. Make your workplace on your workpiece. Vacuum flat suction; d = 190 mm Flat suction pad 250 mm x 80 mm Flat suction 240 mm x 45 mm built-in socket for auxiliary equipment Size 1800 x 800 mm Height-adjustable 874-1074 mm G & FE-VAKUUCAR-3 Extras: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WEIBERT WJ-D53 Thickness Planers WEIBERT WJ D53 NEUMASCHINE! 400V 5,5 KW (7,5 HP) n = 5000 RPM Planing width 530 mm Max.Spanabnahme 8 mm Planer shaft D = 125mm 4 turn blade shaft Clearance height from 3 to 300 mm Feed speed of 8 and 16 m / min. Feed motor 1.5 KW (2 HP) Dust nozzle by 160 mm Electronic height adjustment of the Thicknesser table with display Machine table, Planer shaft bearing block and table management from GRAUGUÃ?! G & WJ-D53

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

Weibert D51 Thickness Planer 510 mm new 510 mm planing width Planing height 250mm Electric height adjustment of the Thicknesser table Digital display of the planing height Four pillar guide of the Thicknesser table Thicknessing table cast iron planed 1150 x 510 mm Motor 5,5 KW 400V 50 Hz 5-8-10-16 m / min feed rate Suction connector 160 mm G & RO-D510-CE Options: 7.5 KW motor power Autom. Star - Delta connection 4 knife - TERSA wave 2 sliding rollers in the thicknessing table

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

4 CUTTER HEADS, MAX. DIMENSIONS OF THE WORK PIECE: 180/120 MM, MIN. DIMENSINS OF FINISHED WORK PIECE: 16/7 MM, SPINDLE SPEED: 6000 RPM, OPERATION HOURS: 30 HOURS ONLY!

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

Key data: 410 mm, 240 mm, 4 kW

SCM 2041 FS Planer and Thicknesser Manufacturer SCM Italy AB 66989 Ref 110830 Year of manufacture approx. 1994, from school use in good condition 3 cutterblock Planing shaft speed 5000 rpm Planing: Table length 2000 mm Planing width 410 mm Support table length 1040 mm Support table length 910 mm Max. Chip thickness: 10 mm Jointing fence swivelling 0 - 45° Table adjustment for planer with rotary lever Pressure link vibration guard Thickness planing: Planing width 410 mm Max. chip thickness: 7.5 mm Chip thickness: 7.5 mm Min. planer thickness: 3 mm Max. planer thickness: 240 mm Planing thickness: 240 mm Thicknessing table length: 730 mm Sliding table roller Planing shaft speed 5000 rpm Feed speeds 6 and 10 m/min Height adjustment of thicknessing table with handwheel Infeed roller steel Exit roller steel Connections: Motor power: 4 kW with motor brake  ...

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

Key data: 4 mm, 80 , 20

Heavy Duty Four-Sided Planer Still in operation until the end of July 2024! Detailed technical description in the PDF document (attached in the photo gallery).

WEINIG planer/moulder Unimat 22A with 9 heads Year of construction: 1987 Serial number 222-896. The planer is in good working condition and has been partially overhauled, cleaned and subjected to careful technical controls. • The machine has been thoroughly cleaned and technically checked. • Some wear parts have been replaced. • A test run was carried out to ensure functionality. • The machine is bolted to a wooden structure and is ready for shipment. • The planer and moulder is equipped with all the tools and is sold as such. Further technical data of the machine: Maximum planing width: 220 mm Maximum planing height: 140 mm Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Length of the inlet table: 2 m The machine has a total of 9 spindles with the following configuration: 1. Lower spindle / dressing spindle : 5.5 kW 2. Right spindle /  ...

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

Gubisch planer and moulder 172/7 S/N 3425 80 Year of construction 1980 Length of the dressing table 1950 mm Planing width maximum 170 mm Planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.Bottom dressing shaft 7.5 kW 2.Right joining shaft 3.0 kW 3.Left wave 4.0 kW 4.Right shaft 4.0 kW 5.Top Thickness shaft 4.0 kW 6.TopDickenhaft 5.5 kW 7.Uniwelle top / bottom 3.0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1.5 kW Feed speed infinitely variable 5 – 30 m/min. Weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical information subject to reservation

Key data: 400 mm, 150 mm, 39 kW

Refurbished: Ledinek Rotoles 400 2V face milling and planing machine (calibration machine). "2V" version stands for two-sided (top and bottom) machining/calibration. Technical Specifications (Model 400 2V) • Working width: min. 40 mm / max. 400 mm • Working height: min. 15 mm / max. 150 mm • Workpiece length: min. 1,200 mm (for Rotoles 2V systems) • Feed speed: infinitely variable up to approx. 60 m/min • Weight: approx. 3,600 kg Key Benefits of Rotoles Technology • Face face milling process: Better surface quality than conventional Planing. There is no planing stroke or wave shadow. • No deformation: The cell structure of the wood remains untouched, creating an extremely smooth and open-pored surface. • Highest precision: Ideal for error-free processing of knots and sensitive branches Materials (e.g. hardwood top layers for multi-layer parquet). • Long  ...

Key data: 5 , 230 mm, 120 mm

5-spindles automatic planer with grooved table WEINIG PROFIMAT 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentat ...

Code: 0447 Brand: TB Model: 29 Jack planer for planing and trimming wooden edges Technical data: Rpm 14000 Power 1000 watts, single-phase 220 V Knives 60 mm Large work surface for comfortable and safe working Overall dimensions cm 25 x 35 x 15 h Weight kg 4

TECHNICAL DATA: Length of inlet planer: 1950 mm Working width: 240 mm Working height: 180 mm Spindle: Ø 40 mm Number of Spindles: 6 Drive via cardan shaft Grooved contact surface Speed: 8000 rpm Installed power: 41 kW Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) 3: Left (5.5 kW) 4: Top (7.5 kW) 5: Top (5.5 kW) with PowerLock HSK 6: Bottom (5.5 kW) EQUIPMENT: Complete with milling cutters Complete with cabin

Key data: 520 mm, 250 mm, 5 kW

TECHNICAL DATA: Working width: 520 mm Working height: max. 250 mm 04 Knives Electric height adjustment 2-speed feed Installed power: 5.15 kW

Used SCM S520 NOVA thickness planer useful working width mm. 520 Standard 4-knife shaft working height min/max mm. 3,5/300 max removal mm. 8 Double rubberized drive roller at the exit nr. 1 toothed drive roller at the inlet Electric Deck Lift 4-speed feed Star/delta starter Shaft rotation speed 4500 rpm Weight kg. 687 CE compliant

Dressing table length 2200 mm Dressing width 500 mm Max. rebate depth 15 mm Thickness table 500 x 850 mm Max. thickness height 235 mm Max. chip removal 8 mm Feed speed 7.5 - 15 m/min Weight approx. 910 kg  Slotted Hole Device  Table dimensions 300 x 550 mm Weight 90 kg Total wt. with slotted hole 1000 kg

Automatic planing and moulding machine WEINIG Powermat 700 Year of construction 2023 Tool arrangement (u-r-l-o-u) 1. Spindle bottom 11 Kw 6,000 rpm 2nd spindle right 11 Kw 7,000 rpm 3. Spindle left together with right spindle driven 7,000 rpm 4. Spindle top 15 Kw 7,000 rpm 5. Spindle bottom 15 Kw 8,000 rpm Feed rate 5 Kw Feed speed infinitely variable 5 - 40 m/min Total connection 60 Kw

Table dimensions 3,500 mm x 530 mm Infeed table length 2,300 mm Wave speed 5,000 rpm