planing machines used for sale (526)

Exhibition MachineProfessional Wood Professional Commercial and Industrial Surface Planing Machine for Professional Use. The machine is characterized by its stable construction and good operability. CE-compliantTechnical data:Dressing table length 2750 mmDressing table width 550 mmPlaning width 530 mmPlaner blade 4 pcs 550 x 35 x 3 mmKnife shaft 120 mmChip removal max. 7 mmLength stop ruler 1300 mmMotor output power S1 4 kW, 400 VAnflung swivel 0-45Suction connection 150 mmWeight 570 kg

AD planing machine Scheppach HMC3200, built in 1993, good condition, 2.9 kW, 320 mn table width, 1380 mm table length, 150 kgPrices subject to change, errors, printing and typesetting errors excepted

Rojek 410 AD planer, good condition, built in 1997, standard equipment, 3.4 kW S1, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, very good condition, year 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, incl. spiral planer shaft, 230 mm thickness planerPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

Technical data:Total table length 2350 mm, thickness table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, dressing stop swivel 90 - 45, feed speed 6/12 m/min, max. chip removal 6 mm, motor output power 5.5 kW (7 kW S6), weight 920 kg, with automatic star delta switching.Options: - Motor output power 7.5kW (9.5 kW S6)- electric table lift; - 2 under-table roller - Digial height display of the thickness table - Knife adjustment gauge

AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Heavy two-sided planing machine in special design - used (overhauled in 2015), . The machine is designed for demanding suitable for machining slats and beams. SPECIFICATIONS Work dimensions: Working width: up to 220 mm Working thickness: 20 - 80 mm Working length: min. 1,500 mm Table height: 900 mm Feed speed: 20 – (120) m/min. The machine will run at Tilly max. 60m/minute Drive motors Dressing shaft: 22 kW Thickness shaft: 30 kW Feed: 7.5 kW Lifting gear motor: 1.5 kW Tool: Horizontal shaft speed: 5,000 rpm Diameter of the tools: Horizontal shafts: 200 mm Chip removal: The maximum decrease depends on the feed speed of the workpiece width, wood texture, installed drive power and the depends on the desired surface quality. For specific information, please for your inquiry. Dressing shaft: up to 10 mm with full working width approx. 2.0 mm Thickness shaft: up t ...

Automatic planing profile milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm(140) 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plastering bottom 5.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Auto. Lubricant pump Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is WORKSHOP OVERHAULED in GOOD - CONDITION from stock Lieboch

Specifications: Planing width: 245 mm Planing depth: 0 - 4 mm Nominal stroke rate: idle 8500 1/min Cutting speed: 32.9 m/s Rated power consumption: 2300 W Weight: 13.2 kg Knife head diameter: 74 mm Universal motor: 230 V / 50 Hz

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

Specifications Spindles: 2 Spindle arrangement: Bottom (5.5 kW) – Top (5.5 kW) Working width: 220 mm Working height: 120 mm Feed: 3 kW // 32 m/min Spindle diameter: 50 mm Jointer Counter bearings Short Parts Package

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

WEINIG high performance planer Type Hydromat 22 BL (full checked!) Built in 1995 With safety hood and soundproofing cabin! Machine specifications: - Planing capacity 220 x 120 mm - Feeding, 8- 80 m/min, motor 18.5 kW Spindle layout: Bottom-right-Links Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared gap unit, consisting of 1 right and 1 left spindle 30 kW each (4500 rpm) incl. table roll, sliding roller, spray indentation and wedge dissipation 4 Roller pull-out Special printing and fittings for the production of top layer slats Feed (divider) for slats and pull-out tape

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kWSpindle speed 6000 rpmVariable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mmDriven table rollerMechanical/digital read-out Centralised lubrication CE sound/safety hoodInterior lightHopperfeed EM 11, upt to 60 cycles/minWorkpiece length: 350 to 3000 mmWorkpiece width: 20 to 230 mmWorkpiece thickness: 12 to 70 mmAir requirement: 8 bar, connection DN8Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/sTooling not included

Capacity: 230 x 130 mm.Number of shafts: 9Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kWKardan drivePneumatic pushersFront surface tableFeed rollers for short workpiecesManually operated pump for bed lubricationShaft diameter: 50 mm.Powered rollers in the tableFeed: 6 - 36 m/minMotorized height adjustment

Capacity: 220 x 120 mm.Spindles: 5Bottom 4kW, fence 4kW, near 4kW, top 4kW, universal 4kWSpindle diameter: 40 mmMotorised thickness adjustment, motor 1,5 kW digital displayInfeed table1700 mm longSiko reading on the shaft positioningProtective hood with electrical contactExtension 5 x 140 mm

Capacity: 230 x 130 mm.Spindles: 7Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kWspindles 2, 3, 4 and 5 are 8000 tr/minstraight jointer on 2nd bottom spindleCardan shaft drivePneumatic pressuresIntermediate driven feedroller for short pieces0,8 m infeed straightening tablemanual bed lubricationSpindle diameter: 50 mm.5 driven rollers in tableFeed: 6 - 36 m/min, motor 7,5 kWmotor height adjustment

Capacity: 230 x 120 mm.Spindles: 4bottom 4 kw fence and near 5,5kWtop 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kWPneumatic pressuresInfeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed tableIn the machine 4 driven feedrollersHardened table (with exception of the infeed table)Separate controll cabinet and electrical cabinetAutomatic bed lubricationPneumatic pressuresOutfeed table with height adjustment 0/0,5/1 mmSound enclosure with electromagnetic securityCapacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm)Feedspeed: 6 - 36 m/min, motor 7,5 kWNumber of spindles: 8Spindle diameter: 50 mmSpindle speed: 6000 rpmBottom 7,5 kW, outboard bearingFence 7,5 kWNear 11 kWFence 11 kWTop 15 kW, outboard bearing, straight jointerBottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm)Top 11 kW, table prepared to take wooden insertsBottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 125 mm.Number of axes: 4Axis diameter 40 mmBottom 6.3 kW, right/left 7.5 kW, top 7.5 kWMobile axis for various widthsPneumatic pressersVariable feed speedMotorized height adjustment of the top barFeed table 2000 mm lengthKnife heads included

Capacity: 260 x 130 mm.Spindles: 5Shaft diameter 40 mmBottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kWCardan shaft drivePneumatic pressuresFeed speed variable, motor 3 kWMotorised height adjustment of top presssure beamInfeed table 2200 mm lengthtools not included

Four-sided planerWorking height: 740-750 mmMax working width: 305 mmMin working width: 50 mmMax workpiece height on 2 sides: 310 mmMax workpiece height on 4 sides: 160 mmMin workpiece height: 17 mmFeed speed steplessly adjustable: 10-60 m/minmotors: bottom 11 kW, top 11 kW, right 7.5 kW, left 11 kWfeed motor: 7.5 kWmotor height adjustment: 1.5 kWspeed 5,500 rpmdriven top and bottom feed rollers

Maximum feed width: 800 mmMaximum feed height: 230 mmVariable feed speed: 8 - 20 m/minPlaning head with 4 bladesExtraction diameter: 200 mmMotor 5.5 kW

Capacity: 180 x 100 mm.Spindles: 4Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kWMotorised thickness adjustment4 cutterblocks ChaindriveInfeed table 1m70. long

This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details.