peripheral equipment (e.g. heating,cooling,drying) used for sale (238)

Very good condition

1 x Mill Turner 1 x Mill Wanner

A gravimetric dosing and mixing unit for plastic granulate Motan is available. Dosing stations: 4, throughput capacity: approx. 150kg/h, reference bulk weight: 0.6kg/dm³, container volume: 4x18l. Machine dimensions X/Y/Z: approx. 600mm/650mm/920mm, weight: approx. 100kg. An inspection on site is possible.

A total of 5 material separators a vacuum pump with filter incl. control bus system ( Wittmann ) 2 Koch dry air generators 2 L-bands 1 separating drum

Key data: 140 °C, 6 kW, 45 W

Special items Various temperature control units pressure-overlaid up to 140 C°

Control System: Touch-screen operator panel Operation: Automatic color mixing and dosing Components of the Machine - Touch-screen control panel (CMA Challenger 151) - Integrated dosing & mixing system - Agitator / stirring unit (working components for mixing) - Pneumatic system / pressure control (pressure gauge and pneumatic connections) - Quick-release connections for tools/stirrers - Recipe management software (AURORA MIX / formula control system or equivalent), with integration into color-matching systems.

Colortronic CTT 30 Granulate Dryer For climate- and air-independent drying of thermoplastic granules and regrind before processing in order to remove the remaining moisture from the inside and outside of the granules. Colortronic dry air dryers work according to the absorption principle. The air is not heated, but the moisture in the drying funnel is absorbed and extracted. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 More items - new and used - can be found in our shop! International shipping costs on request!

Laser welding system Föhrenbach

2 x Alpha 18 W-S with integrated redundant pump station Standard Hyfra equipment: Frame construction in stainless steel Economical low-noise scroll compressors Pump built into the housing; Attention: Required Inlet pressure: at least 0.05 bar! Machine with control transformer, no neutral conductor necessary Flow monitors Antifreeze monitoring Fault message with digital display Collective fault message, potential-free External power-on Automatic fan switching from low to high speed Highly efficient condenser with Micro Channel technology Non-cleanable flap evaporators for water Extras: Cooling capacity approx. 25kW at +13°C tank temperature and ambient temperature of +32°C Medium: Water Water-bearing pipes insulated Radiator designed according to the current ECO Design guideline 2021 (adapted compressor, condenser, evaporator) Housing LxWxH 1640 x 71 ...

System Cooler ERS

Wittmann Robot W813 BJ 2011

OMSO DM44N/ PAGOmat 6HS, 2-Lane Lid Labelling Line. Age 2004, Consisting of:, Base Machine is a OMSO DM44N 2-Lane Lid Machine without the Print Heads and UV-Tunnel, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumalator as well 2 x Denesting unist each with a Vertical Magazine with Universal Helical Screws with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Label Dispenser, Label dispensers, with PLC Controls manufactured by Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Vision System to monitor the Color and positioning of the Labels 400 V, 3 phase, 50 Hz, Max. Lid dimensions: [Round Lids]: Dia. 125 mm, Height: 25 mm. [Rectangula ...

Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...

Temperature range: Max. 30 °Cheating capacity: . kWCooling capacity: . Wcirculating medium: 30 Gradtotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Hydraulic power unit with pressure accumulator

Key data: 300 °C, 2 kW, 144000 W

used oil temperature control unit with 5.5 kW pump max. pre-fuse 80 A electr. Connection 35 kW little used

carrying capacity: 500 kgweight: 930 kgdimensions: 1250 x 2590 x 1500 mmOperating instructions availabletechnical data see attached PDFThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuous melt filter The Berlyn Corporation, today: Berlyn ECM S/N 109F160

Countertop dryer with conveyor

machine measurements: 6,5 x 4 x 6,3 mmachine weight: -- kgpower capacity: 37 kWCondition: usedSpecification: Big-Bag-Station for PE-granulates - second-hand, almost NEW, only commissioned- Year of construction: 2015- product: various PE granulates, no powder- bulk density: 0.5 - 0.6 kg/l- Grain size: lenticular, diameter approx. 3 mm- Temperature: Ambient temperature 10 - 30°C- Product temperature: 10 - 30°C- Moisture: dry- Consistency: free-flowing, not sticky or lumpy- Capacity: approx. 8 t/h- Conveying distance: approx. 82 m, of which horizontal approx. 30 m, 8 bends- Finish: produktberührte Teile Edelstahl 1.4301 inless steel 1.4301- Other parts steel: painted RAL 5010- Power supply: 400V, 3Ph, N. 50Hz- Energy efficiency: Motors with IE 3- Cont ...

Centrifuge for lateral feeding of an extruder with flakes / scrap the centrifuge is equipped with a loading tank previous use was on a 100 mm extruder with a conveying capacity of approx. 330 kg for PET flakes at call

with compressed air accumulator 120 ltr, few operating hours

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

used hydraulic unit with accumulator

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

CONVEYOR STATION LORANDI / OLI / SIPA 30/15

Suction conveyors with side channel compressor and time control various capacities available

Suction conveyors with 3 kW side channel compressor various capacities available

Vacuum pump