446 peripheral equipment (e.g. heating,cooling,drying) used for sale

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Used HB-Therm tool temperatureizers, W-90, AW-90, CW-90, SW-90, SW-140 for sale. They have an output of 6-15 kW, for 90-140C of water.

ready to work

horizontal conveyor belt with hydromotor

UNDERWATER PELLETIZER, up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger holder unit with blade pressure adjustment on the die via an air piston an ...

BAG FILLING STATION WITH LIFTING AUGER, single or double bag filling station for 1000 kg. (apprx) big bags, all made in sturdy carbon steel structure

HERBOLD PU500 PULVERIZER, used for PVC, PE, PP, Output: 500-600 kg/h depending on materials, Constructed in th 90s but refurbished in 2010, Granulator with 55 kW drive, Siemens control, Blower, Grinding discs: Old and new ones, Electrical connections overhauled in 2010, Bearing housing in need of repair (possible supply of the machine reconditioned), installed power - used power in work: about 60-65% : 55 KW, capacity: 500-600 kg/h, type: PU500

AIR SEPARATION SYSTEM, for labels, dust, light weight contamination on flakes, granules and regrinds, An effective way to remove dust and light contaminants from chips is to pass material through an aspirator-type cleaner. In the aspirator, the reground plastics fall through an upward airflow that is set to suck up the light particles, while the cleaned regrind falls through the outlet at the bottom of the aspirator., For a capacity max 1.000 kg/h depending on material, constructed in painted steel + galvanized steel elements Complete system with Ø 160 mm.pipes, curves, clamps, cyclone, hoppers, sleeve Central body, lower and upper hoppers,, bolted hatch for cleaning purposes 0.37 Kw 4-pole motor Reducer, regulation valve, Complete with 0.75 Kw vent., Possible addition of big bag supporting structure with weighing system, For higher capacity, see ref. [GE461](.germanplast.eu/listings/41 ...

ZERMA PM 500 PVC PULVERIZER, average throughput rate 500 kg/h, Disc diameter: 500 mm, 24 kW drive, Total installed power: 79 kW (200 A), including metal detector, Vibrating screen, 2-place big bag filling station, Loading screw and cyclon, Centralized dust extraction system Donaldson TDS8 year 2018, N.2 new spare discs, Complete valve and piping system, Test possible, installed power - used power in work: about 60-65% : 79 kw, conditions: testable

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

CORONA TREATMENT UNIT, can be fitted n sheeters, extrusion plants, bag makers, prints, working width 1.200 mm, machine dimensions : 1,28 x 0,5 x 0,8 mt. kg.120, 6 KVA 3ph 400 V, 50 Hz IP43 protection, control panel, Working frequency 30khz - sine wave -, - Digital display with constant power indication, - Start and stop buttons, - Manual power control, - Panel control of opening and closing of discharge cylinders, - Simple and comprehensible diagnostic LED panel with alarm indication, in the language of the target country, - VISUAL and ACOUSTIC alarm signal, - Electronic protection against short circuits, temperature, and excessive load, - Uniformity of discharge, - Automatic adaptation to different load conditions, - Selector switch for small band treatment and sophisticated power adjustment, - Connection cable length 8 m (Customized wiring on request), - Ozone suction fan control and p ...

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

VOBAU PROFILE DOWNSTREAM EQUIPMENT, Max Profile Section 250 x 100 mm,, Maximal Traction Force 20 kN, Maximal Speed 8.5 m/min, CALIBRATOR - 4000, Fixing Surface Calibration Tools 4.000 x 400 mm, 3 Vacuum Pumps 5 kW Each, Adjustments :, Longitudinal Lenght , Vertical Motorized,, Lateral Manual ., HAUL OFF - 175, Oscillating Pneumatic Top , Manual Down,, Carterpillers Adjustment, Carterpiller Length 175 x 2300 mm, 2 Gears Motors 2.2 kW , Each, Inverter Control , Maximal speed 8.5 m/min, SAW - 450, Ascending Saw , Suction Shaves, Translation Trolley Cut - 600 mm, Disc Ø 450 mm, Motor 2.5 kW, Tilting Table ., availability: immediate

Bausano Modular Compact Line , All 7m Lenght + Tilting, Maximal Profile Section 180 x 100 mm,, Maximal Traction Force 10 kN, Maximal Speed 15 m/min, Specifications: Calibrator type BP/2P/ML, Lenght Calibrator Holder 2500 mm, Longitudinal Adjustement 600 mm ( Gear Motor- Traverse Motor 0.37 kW ), Transversal Adjustment 40 mm, Vertical Adjustment 880 / 1130 mm, Cooling Water 12 Connections, Vacuums Pumps 2 x 4 kW, Vacuum 16 Connections, Haul-off unit type TNP 15 -150 MB, Tracks Lenght x Wide 1500 x 150 mm, Track Max Opening 95 mm ( 2 Pneumatic Cylinders ), Max Speed : 25 m/min, Max Take Off 23 kN, 2 Direct Gear box Motor to everyone carterpillar , 2 x 1.1 kW, Saw type TAV 90, Max Vertical Adjustment 95 mm, Max Cutting Lenght 300 mm, Motor 1.5 kW, Shaves Suction Motor 1.1 kW

CALIBRATING TABLE BATTENFELD K 160 V2, 2 Speck v-pumps 4 kw / 2 sections, 16 x vacuum-connections, 12 x water-connections, Blower for drying, HAUL OFF BATTENFELD P 100 SV, 2-belt haul-off (type caterpillar), Contact 1.200 x 160 mm, Speed approx. 0,5 – 15 m/min., Motor-power approx. 4 kw, Pulling-power approx. -6.000 N maxi., SAW BATTENFELD SPR 32 P, Profile-saw upstroking, Blade Ø 300 mm, Chip/dust-suction, control panles,, Electric manuals available

BECCARIA USED VERTICAL MIXER, mod.TS 8000, Nominal capacity 8.000 lt., complete with horizontal feeding screw and hopper, control panel, good overall conditions, availability: immediate, capacity: 8 m3, conditions: good

BECCARIA USED VERTICAL MIXER, mod.TS 8000, Nominal capacity 8.000 lt., complete with lloading hopper, electric panel, good overall conditions, availability: immediate, capacity: 8 m3, conditions: good

WASHING and SEPARATING TANK, Constructed in AISI304 stainless steel, dimensions approx 5 mt.long x 1,5 mt.wide, horizontal+diagonal extraction auger for sunk materials, n.4 moving and dipping rollers with paddles, extraction screw for floating material, 12 kw installed power, CENTRIFUGAL DRYER, horizontal type, 700 mm. diameter, constructed in AISI304 stainless steel, basket with 2 mm.holes diam., 55 kw drive, Machines in good working conditions, offered checked and reconditioned, installed power - used power in work: about 60-65% : 67 kw, availability: approx 5 weeks, conditions: reconditioned

SINGLE SCREW WASHING TANK, dimensions about 800 x 2500 mm, simple washing system for plastics, including:, hopper and screw conveyor to fill the buffer silo, buffer silo for regrinds, screw conveyor to the tank, n.1 horizontal screw with dipping paddles to sink the material with 1 gearmotor, extraction screw to centrifuge, DRYING CENTRIFUGE, 1300 mm long,, 22 kw drive, blower and pipes, installed power - used power in work: about 60-65% : 28, availability: immediate, options available: reconditioning , capacity: 300 kg/h depending on material and contamination

CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC

PREVIERO CUTTING MILL for strands, Mod.TA 400 G 40, n.3 cutting rotors, constructed in 2002, complete with control panel, Machine RECONDITIONED

BD PLAST NON-STOP SCREENCHANGER, Machine reconditioned Screen Ø 300 mm, suitable for 160 - 180 mm extruders, Heating capacity approx. 25 kW N. 4 heating areas Hydraulic pack., Machine offered reconditioned, complete with Users manual, CE compliance, el.drawings, installed power - used power in work: about 60-65% : 25

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, ---------------------------------------------------------------------- -----------------, SEE ALSO OUR[OTHER FIMIC SCREENCHANGER](.germanplast/listings?q=GEMA100), installed power - used powe ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5, ...

WHEELED TANKER TRUCKS LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge height 4,5 m.from floor, Screw length 8.300 mm, The screw can be lowered for storage, The bearings are dust-tight ...

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, capacity ca.60 m3//h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, adjustable height by manual hydraulic pump, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible discharging pipe with Capacity sensor, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See also other versions with different features [GE752-](.germanplast/listings/7553190-wheeled-tanker-loader-7-mt-long -4-5-mt-discharging-point-or-bespoke)[GE753](.germanplast/listings/755 3224-wheeled-tanker-loader-adj-height-with-automatic-retractable-sleev e)-[GE750](.germanplast/listings/6874982-tanker-loading-system-60-m3-h -automatic-retractable-sleeve), capacity: 60 ...

AMUTEC TCR S 1200, reel-to-reel pre-cut bags, Construction year 2003,, totally revisioned in 2024 by Constructors technicians, very well maintained

vibrating screen, used, reconditioned, vibrating surface 1.400 x 480 mm., height from floor 900 mm., 2 ways out: 1st screen 8 mm Ø to separate clogs, 2nd for good material

SINK-FLOAT SEPARATION TANK for PLASTIC SCRAPS, Constructed in thick AISI 304 STAINLESS STEEL with reinforced plates and profiles, Dimensions 5,0 X 1,5 mt., Inlet hopper for shredded plastics, Flanged water in/out ports, taps and ball valves, n.2 x 1,5 kw.driven rollers for material movement with Bonfiglioli gearboxes, n.1 chain conveyor on bottom to extract the sunk materials, n.1 diagonal stainless steel chain conveyor, collection drained auger for extraction of floating material, size: 5,0 x 2,4 mt., capacity: 800-1.500 kg/h depending on materials