peripheral equipment (e.g. heating,cooling,drying) used for sale (419)

Cooling capacity: 3000 kcal/hcoolant: dest. Wasser tank: 7,7 lvolume capacity: 3 l/minoperating pressure: 3,25 barconnected load: 0,5 kVAconnected load frequency: 380 V• water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tempering device Hahn Automation Built: 09/2010, occasionally worked Weight: 600 kg Heating: 2x 24kW , 80 A Pumps: 2x 3.0 kW , 20 A

Continuously working melt filter New and unused machine Visit possible by arrangement.

Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters

Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.

We sell a Bush SB0310 pump with 3 kW and hopper. It has promoted granules up to 700 kg / h. It's been about 4 years in operation.

CKT 500 52 kW heating to dry cooking dryer is sold by granulate or regrind. Container for approx. 800 kg bulk.

Hopper loaders with separate blower switching box with timer control different capacities available

AutoScreen screen bedside 125 mm width other screen changers (hand-screen changer, hydr. Screen Changer) available

- Stainless steel - Bag of 4 with 1.2 m centrifuge - 40 hp - Label separator - Double Big bag holder

Brand: Pieri Dimensions: 4.5 x 1.20 m Type: Motorized Rollers Geared motor: 1.5 hp (1.1 kW)

Brand: Altech, engine: 15 KW (20 hp), stainless steel.

Head for sheet: 1.45 with 3-roller calender: 1.45 m x 300 mm Ø, brand: Khune. Stretching and cuttering. Brand: Khune with film sheet weighing unit.

Water-based head cutting, brand: Gamma Meccanica, type: TFD150, year: 1996. Centrifuge: 4 hp (3 kw).

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

Screw compressor, make: Worthington Creyssensal, model: RLR 4000 AX2, motor: 30 Kw (40 hp), Bar max: 8, m3/h: 318, working hours: 16.159.

Robot WITTMANN W643, Control: CNC 6.2 Horizontal axis Z : 10000mm Demoulding axis X : Robot 1: 1200mm, Robot 2: 1200mm Vertical axis Y : Robot 1: 2600mm, Robot 2: 2600mm 2 vacuum, 3 pressures Euromap 12

1000KW Cooling Power Sale without guarantee, as is, where is. For more information please sent inquiry

Gravimetric feeder, for example for injection moulding machines. The control system allows the dosing quantity and time to be adjusted. How it works: The rotating screw drips particles into the base material. This can be dyes, lubricants, foam concentrates or others. Base, funnel and material filler neck are optional.

Key data: 95 °C, 12 kW, 45 W

This temperature control unit is in good condition inside and out. Thanks to the powerful pump and the many outlets, it can supply several water circuits. Make an offer. Please also see my other advertisements.

Piovan air blowing station with ELMO-G vacuum pump, Siemens 3 kW electric motor and dust collector with pneumatic valve. In beautiful condition. Please see our other advertisements.

Key data: 100 °C, 8 kW, 30 W

HB-Therm HB-100Z1 temperature control unit with water medium for a maximum temperature of 100 °C. Heating 8 kW, cooling 30 kW, pump 1 kW, 60 l/min, 60 m. In good condition, ready for use. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

The THERMOLIFT 100-2 from ARBURG offers the possibility of drying and feeding a wide range of plastics with just one system. The THERMOLIFT is easy to operate thanks to its compact, modular concept and small size. All programming steps can be integrated into the machine control system. With a capacity of 100 l, you can feed up to two machines. A suction system enables the automatic filling of your THERMOLIFT. Please also note our large selection of other used plastic processing machines. All our machines can be viewed on site via video and tested in person.

Key data: 250 °C, 8 kW

This temperature controller can heat up to 250 degrees with oil medium. It can also be used for injection molding tools, extruder screws, and metal processing machines. Everything works perfectly. Pump, heating, heat exchanger and control are good. I have 1 of these, but there are also other types of temperature controllers for lower temperatures and other machines in the plastics industry. Please see my other ads.

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

Colour and mixing unit with screw Ø 16. Can also be installed on medium-sized injection moulding machines, bottle blowing machines and extruders. Everything works perfectly. You are welcome to visit and try it out. There are 2 pieces available.

60 x 300 cm without stand

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.