other metal working machines used for sale (11,583)

Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550?C useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Tool cabinet for bending toolssuitable for AMADA/PROMECAM or type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allows the two-sided access to the tools-any adjustment of the inserting-robust steel construction, powder-coated-side fork guide rails for transport by means of forklifts (cavity under the cabinet)-the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled- Number of drawers: 4 squares- Mass of a drawer :- Total height 1200mm / Total width 850mm / Total depth 1050mm- Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel)- Fachhoehe total usable without intermediate boeden 990mm- Tray width usable 130mm- Depth usable 980mm- Number of intermediate boeden: 3 stueck

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time

Tool cabinet for bending tools / exhibition objectsuitable for AMADA/PROMECAM or type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg- for AMADA/Promecam tools-extendable drawers, allows double-sided access to the tools-any adjustment of the inserting roofs-robust steel construction, powder-coated-side fork rails for transport by forklift (cavity under the cabinet)-the drawers run on roller slide rails ( serve as additional stabilization)-the cabinet can be disassembled- Number of drawers: 4 squares- Mass of a drawer :- Total height 1200mm / Total width 850mm / Total depth 1050mm- Mass of the faeces in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Fachhoehe total usable without intermediate boeden 990mm- Fachbreite usable 130mm- Technical depth usable 980mm- Number of intermediate boeden: 3 stueck

Tool cabinet for press brakeGood for AMADA / PROMECAM or Type AL / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg-extendable drawers, allowing access from both sides of the tools-any height adjustment of shelves-sturdy steel constructionFork-lateral guide rails for transporting by forklift (cavity under the cabinet)-The drawers run on Rollengleitschienen (serve as additional stabilization), the cabinet can be broken- Number of drawers: 4 pieces- Dimensions of a drawer:- 1200mm Overall height / Overall width 850mm / 1050mm Overall depth- Dimensions of the compartments in a drawer:- Fachhhoehe set to 210mm (is varriabel)- Total compartment height 990mm shelves available ohnen- Usable shelf width 130mm- Usable shelf depth 980mm- Number of shelves: 3 piece

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from wellrenowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

Continuous ageing furnace, make VEI-Engineering type: KADL 2 120 x 240 tracks: 2 furnace output: approx. 2.000 kg/h gross heating zones: 2 gas heated, 3 electrically heated max. temperature: 280°C working temperature: 180 - 200°C useable dimensions (l x w x h): 15.250 x 2.530 x 2.200 mm external dimensions (l x w x h): 28.500 x 5.800 x 6.200 mm

Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good

wire diameter: 3,0 - 5,5 mmnail length: 15 - 80 mmoutput: 150/300 St./min.-for steel pins-; very good

wire diameter range: 1,0 - 5,0 mmring diameter range: 100 - 600 mmwire feeding length: max. 2.000 mmoutput: 10 - 120 pcs./min.; very good

working width: 2.000 mmnumber of line wires: max. 16distance of cross wires: 6\", 12\", 18\", 24\" od. 36\"distance of length wires: 1/2\" to 1/2\"wire diam. length wire: 2,5 - 3,25 mmwire diam. edge wire: max. 4,0 mmwire diam. cross wire: max. 3,25 mmwire diam. knot wire: max. 3,25 mm; ready for operation

Loading capacity: max. 300 Kg.Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mmCoil width: max. 180 mm; good

wire diameter range: 1,8 -9,0 mm number of kalibers: 13; verry good

Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min.machine has been completely repainted; very good

wire diameter range: 1,0 - 4,0 mmcutting length: up to 2.000 mmwire feeding speed: 5 - 90 mtr./min; ready for operation

wire diameter range: 1,0 - 5,0 mmringdiameter: 80 - 600 (1.000 mm)wire feeding length: max. 10.000 mmoutput: 12 - 30 rings/minwelding capacity: 10 kVA; ready for operation

1 Qty. 1 Second-hand profiling machine – P16 Mfc.: TBA Built: 1973 Overhauled 1990 Type: P16 Material to be profiled: S185 to S355 Quality of the material: Black, pickling, galvanised Strip thickness: 1 to 3.5 mm Strip width: 500 mm Max. profile height: 81 mm Profile length: 3.5 to 8 m 2 Qty. 1 Second-hand profiling machine P-17 Mfc.: TBA Built: 1985 overhauled 1990 Type: P-17 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.5 mm Max. strip width: 230 mm Max. profile height: 41 mm Profile length: 3 to 6 m 3 Qty. 1 Second-hand profiling machine P-20 Mfc.: TBA Built: 1989 Type: P-20 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.0 mm Strip width: 350 mm Max. profile height: 80 mm Profile length: 3 to 6 m 4 Qty. 1 Se ...

TFT replacement monitor for MAHO machines with Philips control CNC 432 2 year warranty!; New

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Various threaded rollers

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

WIELAND IS 75 R Mobile Spaene extractor extractor system Manufacturer WieLAND Type IS 75 R Consisting of suction system type IS-75 R and Cooling agent tank, type FS 300, built 1986 Dimensions (LxWxH) approx. 1500 x 1200 x 1700 mm Weight approx. 550 kg Special price

Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price

They are offered from a working measuring machine Electronic components and Heidenhain External impulse formers All prices VB or against bid 1st 1St Renishaw Autochange Control Unit ACC2-2 Closing at the back: Pics in ; Pics out ; RS232 ; CMM ; Rack Price 890.-EUR 2. 1 Pcck Renishaw Probe Head Controller PHC 10 Serial K14908 Connection at the back: output ; IEEE ; RS232 ; Head ; PHD10 Price 490.-EUR 3. 1 Pcs Renishaw Sample Interface Price 490.-EUR 4. 3 Stueck Heidenhain External Pulse Converter Electronics (Measured value converter) EXE 610 C with manual Price 190.-EUR / Stck Special price

Glass scale by Heidenhain Type LS303 LS603 LS703 Only types and lengths listed below are available. 1 x ML 1020mm LS703 1 x ML 1740mm LS703 1 x ML 1140mm LS603 1 x ML 220mm LS303 1 x ML 370mm LS303 Price on request Special price

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

conventional haertepruefer for the Processes Rockwell C , B , A Analog measuring watch, manual operation, weight load system Standard compliant according to ISO6506 Performance 2 years At the price, no used hardness tester is worthwhile. Better to spend a little more, but with a guarantee. More info schuetz-licht.de/produkte/haertepruefer/haertepruefgeraete-rockwell/ha ertepruefgeraet/