other metal working machines used for sale (11,583)

ram weight: 1000 kgstroke: 1000 mmthroat: 800 mmimpact capacity: 4200 mkptotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 7000 mmwidth: 7000 mmnumber: 8 Thickness: 350 mmT-slot - width: 36/58 mmT-slot - distance: 285 mmdepth of the T-nuts: 62 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPanel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2000 mmfloor-plate height: 350 mmwidth of T-slots: 36/60 mmT - slots distance: 285 mmnumber of T-slots: 8 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 4000 mmfloor-plate width: 1600 mmfloor-plate height: 300 mmT-slot - distance: 175 mmT-slot - width: 28/48 mmnumber of T-slots: 9 total power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4000x1600x250 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 4 kgworkpiece length: 200 mmdia. on complete length: 200 mmControl: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hzdimensions: 4,1 x 4,2 x 2,5 mconnected load: 12 kVAflange diameter: 250 mmweight: 4,5 tBalancing machine for rotors - Turbocharger fuselage groups- hydraulic measuring station- Compensation station- Pulsation measuring table- Chip extraction- Measuring instrument CAB 950T- feeding device- Schenck/Lauer Control on Dase of WindowsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mmfloor-plate width: 2400 mmfloor-plate height: 300 mmwidth of T-slots: 45/78 mmT-slot - distance: 300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mmround steel bars: 30 mmU-iron on the x-axis: 60 x 40 x 6 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 118 - 148 mmturning speeds: 9,3 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,425 tdimensions of the machine ca.: 1,5 x 0,8 x 0,8 m• Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5.further roller sets optionally:for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4,Surcharge for each extra roller set: € 440,-/setMachine in unused condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 5000 mmfloor-plate width: 2100 mmfloor-plate height: 300 mmT-slot - width: 40/63 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram hammer weight: 480 kgstroke: 710 mmthroat: 550 mmimpact capacity: 1250 kpmno. of strokes: 210 Hub/minram hammer stroke: 710 mmwork height max.: 720 mmtotal power requirement: . kWweight of the machine ca.: 7,4 tdimensions of the machine ca.: mpressure: 400 kgSteam driveThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mmheight: 700 mmdepth: 350 mmthickness of clamping plate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThere are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mmAbout usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 800 mmmeasuring range X-axis: 520 mmTable dimensions: 700 mmweight: 900 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 40 x 40 x 5 mmU-iron on the x-axis: 80 x 45 x 5 mmroll diameter - bore: 40 mmroll diameter -toolpieces: 150 mmturning speeds: 10 U/minvoltage: 400 V / 50 Hztotal power requirement: 1,5 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: 0,8 x 0,92 x 1,4 m• Machine has a standard set of rolls for profile: flat (upright) 60 x 10, flat 80 x 15, Square 35, square pipe 45 x 45 x 2, rectangular pipe 60 x 30 x 3, Further sets of rolls can be supplied optionally,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 3000 kgProduction capacity: 1500 kg/hdegree: 1200 °cheating capacity: 1700 kcal/KWtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 800 mmwidth: 500 mmheight: 1000 mmpower capacity: kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: m2 unitsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mmthreading length: 20 mmturning speeds: 400 U/minworking area: 500 - 1600 mmweight of the machine ca.: 25 Kgdimensions of the machine ca.: m• pneumatical thread cutting device, M3 - M12,• with 6 adapters of thread cuttings, Size 1,• control valve with lubrication,• order no. 31681,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

type: gas-fired rotary hearth furnace with central recuperator and air preheating max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

Tensile testing machine Manufacturer: Karl Frank GmbH Type: 81559 Year of construction: 1980 Duck test: height: 1000mm, width: 400mm, depth ungraenzt Force ranges: 2000N, 1000N, 500N, 200N, 100N, 50N Original price at that time: 49.855,00 DM ATTENTION: The device has not been tested for functionality. All information without guarantee

Number of tools: 36 St.dimensions: 0,72 x 0,56x 0,95 mweight: 27 kgNew movable tool trolley for toolholders with 40 taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of tools: 30 St.dimensions: 0,72 x 0,56x 0,95 mweight: 27 kgNew movable tool trolley for toolholders with 50 taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

table length: 1000 mmtable width: 1000 mmtable load: 1,5 tflange diameter: 700 mmturning speed: max. 0,04 U/minweight of the machine ca.: 1,2 tdimensions of machine L x W x H: 1,60 x 2,0 x 1,50 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 7 units, drilling and thread cutting8 units, drilling and sinking 5 units, drilling, sinking and thread-cutting 2 unit),spindle taper SK 40 each, engine power of the individual unitsbetween 4.0 and 4.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW= transfer machineShift drum with 10 workpiece stations,22 machining units (drilling 10 units, drilling and thread cutting5 units, drilling and sinking 3 units, drilling, sinking and thread-cutting 1 unit, thread cutting 3 units),spindle taper SK 40 each, engine power of the individual unitsbetween 4.5 and 5.5 kW,SIEMENS control SIMATIC OP 3, assembly robot ABBAccessories.: chucks (without jaws), chip conveyor, coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 450 mmy-travel: 400 mmz-travel: 320 mmtool taper: HSK 63 spindle turning speed range: 0 - 10000 U/minrapid traverse: 30 m/minSystem for processing fittings, valve housings, etc.consisting of1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 1-0 / 1-V, YOM 2010, with 2 pcs. 3-axis machining modules, each with 8-pos. tool turret, travel paths module 1: X1 / Y1 / Z1 = 450/400/320 mm, travel paths module 2: X2 / Y2 / Z2 = 450/400/320 mm, tool fixture HSK 63, rotary table with 2 integrated workpiece carriers á 400 mmø (B axis per workpiece carrier 360 x 1 °), coolant through spindle Acc.: chip conveyor, coolant deviceconnected by ABB handling robot with1 used flexible manufacturing cell (transfer machine) make RIELLO, model VERTIFLEX VFX 450-2 / 2-0 / 1-V, YOM 2003, with 3 pcs. 3-axis machining modules, each with 8-pos. tool t ...

diameter: 400 mm= pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2000 mmgear width: 0 mmmax. module: 0 dimensions of the machine ca.: 2x1,2x1,5 muncomplete machine body with drive motor. drive unit fully functional. Without grinding unit.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 680 x 450 x 430 mmoperating pressure: 3 - 6 barAir consumption: 250 l/min.weight of the machine ca.: 28 Kg: 0,76 x 0,5 x ,75 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sandblasting system, blasting cabin, double blasting cabin, core box blasting cleaning device used The system consists of the blasting cabin for 2 workers with extendable rotary table, work platform and control cabinet. A suction and filter system with cyclone and compressed air purification as well as the blasting device. Hesteller: unknown Type: BFA-2-2 Rotary table diameter approx. : 1,1 m max height of the workpiece: approx. 0.8 m Dimensions cabin approx. 2 x 1.8 x 3.7 m Total dimensions with entry device: approx. 4.9 x 2 x 3.7 m Dimensions pedestal: approx.: 4.9 x 1 x 1.8 m Dimensions filter: approx. 1 x 1 x 2.7 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...