other metal working machines used for sale (11,036)

Complete professional powder coating plant in excellent condition, available from today. 00000 00000 00000 Turnkey delivery, we take care of all the work Control units from Gema We will respond to your inquiry immediately with all the details. Smooth processing, since 2010 With plastic booths, powder center, pump delivery, automatic guns, visual controls from Siemens Simatec 3D scanners, according to the latest technology... and of course pre-treatment with nano-coating Drive only e.g. 2 hours and look at a reference plant, one of many in the DACH region (since 2010) Contact us now, it's worth asking See PDF for all details powceq com (project page) , see also video here

Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible.

A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lo ...

X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6

Key data: 200 kN, 1600 mm

We are selling our SSIA 20/1600 broaching machine, which we are currently still using in production. The machine has a pulling force of 20,000 kg and a broaching length of 1,600 mm.

Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Various metalworking machines are available. 1) Larger BBM guillotine shears, year of manufacture: 1995. 2) Nimak spot welding machine, year of manufacture: 1990s. 3) Roundel machine Schwartmanns, year of manufacture: 1987. 4) Smaller lathe Weiler, year of manufacture: 1966. 5) Table-top stud welder Soyer, year of manufacture: 2000s. 6) Freestanding grinding motor. 7) KSM deburring machine, year of manufacture: 1980s. 8) Larger Tox hydraulic stamping press, year of manufacture: 1990. 9) TES 15 hydraulic press, year of manufacture: 1972. 10) Single-column table press, year of manufacture: 1955. 11) Landert honing machine. On-site inspection is possible.

- Power consumption: 26 kVA 3P400V /N/PE/50HZ; Fuse 63A - Compressed air connection: min. 5bar, max. 7bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa min. 20 m/s, run-on time 15s The plant was cleaned, packed by the manufacturer, preserved and stored. It is complete and ready for operation. The facility can be visited at any time, by appointment.

power capacity: 63 / 93 kWvolt: 380 Vampere: 122 / 178 Aweight of the machine ca.: 0,5 tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bar length 1,500 mm Bar diameter 4 – 85 mm Weight approx. 400 kg UNUSED!

A coolant separator is available. Volume flow: 4000m³/h, total pressure: 2000Pa, power: 4kW, connection diameter: 75mm, material: stainless steel. Documentation available. On-site inspection is possible.

table-size: Breite: 800 mmtable-size: Tiefe: 350 mmworkpiece height: mmDimensions (L/W/H): 4600 x 3200 x 2500 mmweight of the machine ca.: 4,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: - mmthreading length: - mmthroat: ca. 2000 mmtotal power requirement: 0 kWweight of the machine ca.: 0,2 tdimensions of the machine ca.: 1,30,82,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1300 mmy-travel: 610 mmz-travel: 600 mmtaper: Aufnahme 50 Axis: 3 control: Heidenhain 530 : : ja : 20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 450 mmturning length: 380 mmcontrol: FANUC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tstroke: . mmtotal power requirement: . kWweight of the machine ca.: 3 tdimensions of the machine ca.: . mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 1008 rated current: 20 A voltage: 24 Vweight of the machine ca.: 3,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 3 - 10 mmTools speed: 120 - 600 U/mintable-size: 250 x 350 mmthroat: 250 mmvoltage: 380 Vthreading length: 80 mmtotal power requirement: 0,55 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 0,7 x 0,7 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 12 mm: max. 600 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgElectric tapping machines for M3 - M12 threads,8 pcs. quick-change chuck with slipping clutch.Adjustable via display:variable speed, adjustable depth, choice ofMain direction of rotation, torque.Documentation in English!Options:- Clamping table with T-slots: 990x700x800mm.- Magnetic base.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 1113-23 turning length: 500 mmturning diameter: 220 mmchip conveyor: ja kW: Werkzeugwechsler 12-fach spindle turning speed range: 5000 U/mintail stock: automatisch Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 200 kg: 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 80 lworking pressure: 4 - 8 barAir consumption: 250 - 800 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile jet unit with extractionConsisting of:microfilterBoiler 80 litersBlasting gun with 2.5m supply hoseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speeds: 40/80 U/min: 0025 voltage: 380 Vclamping: ja kWmiter: ja weight: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 205 mmx-travel: 600 mm: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: M3 - M12 mm: 400 U/min.: 25 Nmair pressure: 6 - 8 barworking area: Radius 1000 mmweight of the machine ca.: 12 kgDemonstration machine!Pneumatically driven tapping machine for M3 - M12 thread with:- stable and flexible working arm.- 6 pcs. Quick-change chuck with slip clutch.Documentation in English optional:- Clamping table with T-slots clamping surface 900 x 600mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Receiver capacity: 2 x 37 lworking pressure: 4 - 8 barAir consumption: 170 - 500 l/min.weight of the machine ca.: 36 Kg: 1020 x 460 x 520 mmMobile beam unit (soda blasting)Consisting of:Nozzle set and moisture separatorBoiler 2 x 37 litersBlasting gun with 2.5m supply hoseSoda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1000 mmweight: 88 kgheight: 390 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3 Stück Dimensions (L/W/H): siehe Bilder mmweight of the machine ca.: . tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 0 mmy-travel: 0 mmtable length: 600 mmtable width: 400 mmtotal power requirement: 2 kWweight of the machine ca.: 1500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.