other metal working machines used for sale (10,917)

oven 700 Uterna Europe 80KW 700 Celsius Ziel des Spannungsarmglühens schoenheider ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeumwandlungen, Kaltverformung und durch spanende Bearbeitung. Wichtig für ein gutes Ergebnis ist nicht nur die richtige buerstlein Temperatur, sondern auch eine umsichtige Abkühlung. Nur so lässt sich eine erneute Spannungsbildung vermeiden. Typischerweise findet das Spannungsarmglühen bei Temperaturen um 600 °C (bei zuvor vergüteten Bauteilen jedoch 30-50 °C unter der letzten Anlasstemperatur) statt. Die Wärmebehandlung ist das häufigste Veredelungsverfahren, mit dem die Eigenschaften der Stähle gezielt verändert und ihre optimalen Gebrauchseigenschaften für den jeweiligen Einsatzzweck herbeigeführt werden. Erst durch eine der Stahlzusammensetzung, dem Verwendungszweck und der Ba ...

pressure:15 tstroke:160 mmweight of the machine ca.:330 kgOil tank capacity:10 l

CNC-Portal Cutting Machine Manufacturer: Sato Type: Satronik D5765 Built: 2016 CNC control: Satocontrol CNC 3010 Track width: 5,750 mm 6 x oxyfuel torche without a career without table without filter

Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

Used nipple holders Nipple holder with internal voltage, up to 2", self-exciting

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

Powder incineration oven 4,500 x 1,900 x 2,000 mm electric 1 inner dimension length 4,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m3/hr 10 Electric motors 2 pcs. 2x 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 74 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual f ...

Powder incineration furnace 3,500 x 1,900 x 2,000 mm gas operation 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW = 49,880 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 burner 1 pc. oven is heated with gas burner. 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration oven 3,500 x 1,900 x 2,000 mm electric 1 inner dimension length 3,500 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m3/hr 10 Electric motors 1 pcs. 3 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 58 kW 12 sash doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heating electrically heat-resistant fans and heat-resistant bearings, thermoblock has overheat protection 14 Burner 1 pc. oven is electrically heated 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide

Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Mobile marking station Marking of metal parts - was used in Faurecia Machine checked - fine, ready for use

Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm

Qty. 1 Second-hand basket transport and storage system Mfc.: Mannesmann Built: 1994 Storage capacity: 154 baskets Transport system for linking the drawing cascades with following drawing machines to storage of tube coils in baskets - warehouse management system.

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

Delta powder hand system from 1900 €

Immediately available New ovens - Exhibition e.g. SLS-15o Electric circulating air oven , Horde wagon Inner BHL: 1200x1800x1600 mm Price from 8,900 + freight

Romer Immediately available Gravitational Furnace SLS-9 New - Exhibition Price from 6,900 € Net + Freight

Immediately available New cabins KPO-3o and KPZ-3o e.g. 2800 2240 920 Price from 6,900 + freight

Immediately available New cabins KPO-2 and KPO-2o 900 x 1800 x 880 Price from 4,900 + freight

GAS incineration furnace powder furnace Chamber furnace SOFORT LIEFERBAR Gas oven with circulating air SGS-320O Price 47,444.00 EUR net • Working dimensions ca.in mm 1800 width x 2500 height x 6500 depth • External dimensions ca.in mm 2320 width x 3410 height x 7300 depth • Operation NG • Heating capacity 320 kW • Heating time of the empty and cold oven approx. 15-40 minutes from room temperature 20 °C to 180 °C • Max temperature 230°C • Circulating air • Fans 1.1 kW x4 3P 380-400V • Insulation thickness from 240 mm to 300 mm • Transport in the oven 5 rails

Key data: 500 , 350 , 300

Travel X 500 / Y 350 / Z 300, Water bath machine, automatic wire threading, incl. 20 KG option incl. cooler

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

Complete system Powder cabin KPZ-4 PSN Automatic washing system (2-zones) Gas oven with circulating air SGS-80O Hand slide track

Service - Creation of an offer for powder coating plant from Romer. directly from the manufacturer romer-Germany Manufacturer of powder coating plants and industrial furnaces, plant construction Delivery time approx. 10 to 16 weeks Shipping costs must be charged separately.

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available