other metal working machines used for sale (10,916)

through-put width: 820 mmworking heigth: 810 mmAir consumption: 680 l/min.air pressure: 8,6 bar: 148 Liter0: Arm Loch 180 mmair clutch: 3/8 Zollweight: 160 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1110 x 820 x 810 mm (LxWxH)- very stable construction- including sandblasting gun (usable grain size 0.149 - 0.250 mm)- including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Transport dimensions / packed: 1350 x 1000 x 1100 mm- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 1000 x 900 x 900 mmrange L-W-H: 1300 x 1750 x 2200 mmweight: 350 kgDescription:- Compact and elegant design- Easiest operation- low material consumption- optimal use of space- highly effective dedusting- efficient way of working- Environmentally friendly working without dust nuisance- controllable material consumption- Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 120 kgtotal power requirement: 1,2 kWweight: 115 kgrange L-W-H: 1225 x 935 x 1640 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- With gas pressure springs for quick and easy loading and unloading- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Container for ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System Marking Laser FOBALAS F 94S Laser Marking System Laser Type: FOBALAS 100 CW/QS - ND: YAG Performance class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Volts: 15 V Wavelength 1064 Hours: 43927 More items - new and used - can be found in our shop! International shipping costs on request!

max. wheel diameter: 400/500 mmCNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mmcrown gear diamter max.: 500 mmx-axis: +/- 70 mmy-axis: 200 mmz-axis: 200 mmaxis angle: 90 Gradspeeds:: R 0 - 3000 / T 0 - 5000 1/minrated current: 30 kVAweight of the machine ca.: 6,2 tdimensions of the machine ca.: 3,2 x 2,5 x 2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in very good condition and ready for operation. An on-site inspection is possible.

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

Two digital calipers Digital caliper in lightweight construction, Garant 800, identical to Mahr MarCal ESA 800, measuring range 800mm with wooden box Digital caliper Mitutoyo 700-111, measuring range 150mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Assortment of measuring tools, calipers Digital depth caliper Mitutoyo 571-203-10, measuring range 300mm Digital gate valve Garant 412601/150 (manufacturer probably Mitutoyo), measuring range 150mm Digital caliper unknown, measuring range 150mm Analogue caliper Expert, measuring range 300mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Measuring machine (horizontal) TYPE: 0167.15.12.35

x-travel: 4000 mmy-travel: 1000 mmz-travel: 1500 mmControl: Heidenhain 355 weight max.: 10 thead swivability: °: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: 600 mmhydraulic: ja : keins dabei weight: 3,7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 880 mmweight: 60 kgheight: 320 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2,5 mmwidth: 2,5 mmheight: 2,4 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

loading area: mit Untergestell weight: 125 kglength: 900 mmheight: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

Working range: 1.050 x 650 x 250 mmmax. workpiece weight: 400 (800) kgcontrol: Agievision AGIEmax. conicity: 30° / 100mm travel -x axis: 500 mmtravel -y axis: 350 mmtravel -z axis: 426 mmtravel U x V-axis: +/-70 / +/-70 mmrapid traverse X-axis: 3 m/minrapid traverse Y-axis: 3 m/minrapid traverse U-axis: 0,6 m/minrapid traverse V-axis: 0,6 m/minrapid traverse Z-axis: 0,6 m/minwire dia.: 0,2...0,33 mmtotal power requirement: 12,1 kVAweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mDocuments: Wire Eroding MachineAGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 580 mmworking heigth: 580 mmair consumption: 400 - 800 l/minworking pressure: 3,4 - 8,0 barsuction capacity: 17,4 m³/htotal power requirement: 1,2 kWweight of the machine ca.: 115 kgdimensions of the machine ca.: 1225 x 935 x 1640 mm- Suitable for various blasting materials, e.g. quartz, glass ball, Plastic ball, etc.- Ideal for cleaning, derusting or removing paint from all metal parts Type, e.g. engine parts, fittings, signs, housings, rims, hinges- High-quality latex work gloves are firmly attached to the housing- Optimal visibility and occupational safety when machining workpieces because of the Window with glued protective film- Dust-free work due to all-round seals on the cover and door frames- Stable storage grid enables workpieces to be placed in the cabin interior- With drain opening for changing the blasting material- Suction pipe for the blasting materia ...

An old plano milling machine (guideway grinding machine) Waldrich Coburg is available. Bed length: 5500mm, bed width: 750mm, machine dimensions X/Y/Z: approx. 12000mm/300mm/3000mm, weight: approx. 37500kg. An on-site inspection is possible.

cutting diameter: 650 mmsaw band length: . mmcutting width: 1000 mmCutting height: 650 mmweight of the machine ca.: 6,4 tdimensions of the machine ca.: mCutting speeds: 16–170 m/minWorking area: approximately 670 mmMaterial support height: 700 mmThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 Koffer: . The technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: SK50 weight: . kgmaterial: . 34 piecesThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of floors: 7 Einsätze Width of floors: 1000 mm Depth of floors: . mmheight: 1950 mmdepth: 600 mmwidth: 1050 mmRoller shutter defectiveThe technical data is provided by the manufacturer or operator and is therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items Accessories for your workshop If you want to sell machines, production lines, or your business, then talk to us. You can find more offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 4000 mmy-travel: 3000 mmz-travel: 1000 mmw-travel: 1500 mmTable area: 2000x2000 mmTable load: 30 tFeed: 3-3500 mm/minRapid movement: 5000 mm/mintransmission ratio: 2 spindle power: 37 kWtotal power requirement: Heidenhain kWvoltage: 380 Vfrequency: 50 HzControl: type: ITNC mmweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward t ...