other metal working machines used for sale (10,916)

3D coordinate measuring machine XM 1600 control unit Measuring range on the table 200 x 200 x 200 mm Maximum measuring range 2000 x 1200 x 1000 mm Accuracy: +/- 7μm Repeatability: +/- 3μm

Wire EDM Machine Charmilles Robofil 4030 SI BJ 2001

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible.

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

FOBA G5 Laser Engraving Machine LP100 with Swing Doors - With IMP-EMC Intelligent Mark Positioning for engraving systems (Camera for optical detection of the component position and alignment of the laser marking) - Jacket engraving unit - X/Y cross table round shaft guide - Deflection unit (TS10), mounted on the laser head, with standard lens (f=163 mm), Labeling field approx. 120 x 120 [mm] - Water/water cooler - Z-axis (with gearbox and servo drive), travel 500 mm - X/Y cross table round shaft guide Table top 250 x 250 [mm] with steel stop bracket, Travel distances 480 x 500 [mm], Max. load: 100 kg - - Servo axis control for all axes Operating System Windows XP Engraving Management Console (IMP-EMC) application software package Control panel with monitor, keyboard and mouse Design in laser protection class 1 Dimensions (W/H/D) 1100 / 2200 / 2200 [mm] � ...

A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible.

Extraction Lissmac Type: DD 3200 BJ 2014 for Deburring Machines

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure, Software path management, Filter system with chiller for dielectric fluid, Automatic fire extinguishing system DIN 14497, Standard programs for measuring, eroding etc., Program for chamfering of workpiece cutting edges,, Automatic Diagnosis program for machine operational status with text output on screen, Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine,, 6 sided erosion wheel changer,, Workhead SK 50 with adapter to 12 HSK 63 A,, Turntable workpiece magazine for 12 workpieces SK 50,, Turntable workpiece magazine for 4 workpieces SK 50,, 6 flush sets, QXD250 CAD/CAM for external PC workstation ...

An external whirling unit ProCon for external machining of threads and rotationally symmetrical shapes is available. Installation height: 180mm, motor power: 7.5kW, through hole of hollow spindle: 160mm, tilt angle right/left: 28°/45°, speed: 1800rpm, angular resolution: 0.1°, cutting circles: SK70/SK90, cutting circle pockets SK70/SK90: 4(6)/8, cutting circle bore SK70/SK90: 100mm/120mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible.

3D Measurement Macroscope Controller VR 3000K Measuring head VR 3100 Measuring range 24 x 18 x 10 mm Measuring diagonal 30 mm Magnification: 12x – 160x Resolution 0.1 μm Automatic edge detection

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

Power Pack generator power 60 A Table size (width × length) 350 mm × 600 mm Travel (X × Y × Z) 400 mm × 300 mm × 300 mm Control: CNC Incl. extinguishing system

Image sensor 1", 6.6 megapixels, CMOS Dual telecentric lens Z-axis travel 30 mm Z-stage stage maximum load 3 kg

Zeiss UMESS 850 measuring machine

Faro Gage Plus 6-axis measuring arm Measuring arm length 4ft (approx. 1.2m) Accuracy 5+8L/1000μm with trolley, accessories and associated transport case Incl. software and operating instructions Never used/Unused - Mint

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. In ...

Qty. 1 Second-hand Shot-Blasting Line Mfc.: COGEIM – SAS Eng. Built: 2016 Dismantled and in storage Type: 4 Turbines Material to be processed: Bars’ length: min. 6.000 – Max. 12.000 mm Approximate work pieces dimensions and weight: Dimensions: round Ø 30 - 110 mm No. of simultaneously processed bars 7 up to Ø= 60 mm; 4 for bigger diameters

Trumpf Haas HL 4006D Solid-State YAG Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and a range of up to 100 meters via flexible light guides. Applications Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed to be integrated into automated production lines with industrial robots. Precision machining: The high performance and precise beam quality enable precise work in industrial machining. Specifications Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Nominal voltage: 400 V Rated power:132 kW N ...

EDM machine Gantry Eagle 500 Year 2011 Travel: x/y/z = 525x400x450 Changer: 24 times Weight: 5000 kg

Tool presettler Zoller smile 400 pilot 2 BJ 2008

EDM machine Fanuc Robocut a1iB BJ 2002

EDM machine Agie Charmilles Cut e 600 BJ 2018

A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace

weight of the machine ca.: 6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various metalworking machines and peripheral equipment are available. 1) 2x B-axes. 2) 2x flat gear motors FH77DER. 3) 3x helical gear brake motors R87DRS132S4BE11. 4) Flat gear motor FH77GDRS. 5) Variable displacement axial piston pump. 6) 2x Eisele saws with roller conveyor. 7) Drilling machine. 8) 2x pallet trucks. Some of the machines are defective. An on-site inspection is possible.

Measuring machine Tesa Xcel 7107

Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.