other metal working machines used for sale (11,423)

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set-Top jaws: Jaw set for four-jaw chuck, hard-Jaw width: 34 mm-Dimensions: see photo technical drawing-Dimensions total: 130/136/H80 mm-Total weight: 7.3 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck-four-jaw chuck: chuck size Ø 190 mm-Passage: Ø 57 mm-Bolt circle: Ø 170 mm-Interchangeable jaws: Width 20 mm not included, can be supplied at an additional cost-Dimensions: Ø 190 x 65 mm-Weight: 8 kg

Bezel, steady rest, lynette-Bezel: max. opening Ø 170 mm-Centre height: 325 mm-Support: ball bearing-technical drawing: in the photos-Dimensions: 520/260/H590 mm-Weight: 77 kg

Try square, locksmith square, hair square, precision hair square, control square-Manufacturer: Hommel, stop angle DIN 875/0-Type: 600 x 400 mm-Accuracy level: 0-Dimensions: 615/400/55 mm-Weight: 6.6 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks-clamping force: max. 1800 kp-with: interchangeable jaws-Chuck size: Ø 140 mm-short taper-Transport dimensions: 200/200/H150 mm-Weight: 12.1 kg

Key data: 30 kN, 1000 mm

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Title: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Type: RS 30/1000 Machine No.: 3813 Year of Make: 2019 Never put into operation Full documentation without broaching needles Workspace Stroke: 1000 mm Gross tractive force: 30 kN small/large cutting speed: 1.0 – 7.5 m/min small/large return speed: 1.0 – 7.5 m/min Indoors: Tool feeder: by hand/independently Large workpiece Ø: 300 mm Outdoor spaces: fixed/movable/rotatable workpiece clamping plate Area of clamping plate: 255mm x 400mm T-slots: 2 pieces, 14mm wide, parallel/perpendicular to the clamping surface of the tool carriage Accessories/special equipment: Coolant Setup Broaching tool safety Machine hood to protect the working area Area requirement: 0.72m x 1.3m x ...

Screening machine in good condition for sale. Type Schwanog Rapid SBM 63 GDS - Year of construction 1973 - Machine No. 1198

length: 800 mmwidth: 600 mmheight: 1200 mmweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Zippel single-chamber cleaning system is available. Number of containers: 2, container volume: 300l, usable volume: 600l, usable height: 850mm. On-site inspection is possible.

Measuring machine Zeiss WMM850 BJ 1988 generalueb. 2008

Surface Grinding Machine Aba FF450/30 BJ 1980

Measuring machine Zeiss Prismo 7 BJ 1997 generallueb. 2024

Zeiss Pro T advance 16/21 measuring machine

2 x die-sinking EDM machines ZK Genius 700 BJ 1010 and 2019

Omron LD90 mobile robot

Omron Tm 5 700 robot

Trackscan Sharp 49

Measuring arm from Hexagon, demonstration device, in-house since August 2024 but not in use

The machine we would like to offer you is an Agie Hyperspark 2 and is from 2004. The machine is very well maintained and enjoyed annual AGIE/GF service. Operating hours 122,829 h and EDM hours 23,101 h

cutting diameter: max 400 mm: mit Sägeblättern weight of the machine ca.: 1,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ampere: 330 A: mit Kabel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja : Hydraulische klemmung weight of the machine ca.: 3,3 t tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 8 tNumber of working hours: 2633 hheight of stroke: 3750 mmweight of the machine ca.: 11600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 tstroke: 600 mmweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: . tthroat: . mmstroke: . mmtotal power requirement: . kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain centre distance: 1400 mmweight of the machine ca.: 3,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 3 tox-travel: 750 mmmilling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: . mmgrinding width: . mmworkpiece height: . mmTable: 870x130 mmtotal power requirement: 2,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2x1x2 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dividing head, dividing head, gear, gears, lathe-Gear: 70 teeth module 1.5-Tooth width: 12 mm-Shaft mount: Ø 20 mm-Dimensions: see photo parts list-Quantity: 1x gear available-Dimensions: Ø 108 x 12 mm-Weight: 0.5 kg.