other metal working machines used for sale (11,421)

feed pressure: 10,0 barintake capacity: 345 L/minEffective free air delivery: 228 L/minReceiver capacity: 50,0 Ltr.motor: 230 Vpower capacity: 2,2 kWweight of the machine ca.: 51,0 kg.dimensions of the machine ca.: 800 x 390 x 750 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2 cylinders and optimal efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings are sealed with easily removable special adhesive and can easily be exchanged if necessary- the start-up relief takes place via a mechanical v ...

feed pressure: 10,0 barintake capacity: 727 L/minEffective free air delivery: 582 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 4,0 kWweight of the machine ca.: 91,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed, 2-stage compressor block- with 2 cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head for optimal temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings a ...

feed pressure: 10,0 barintake capacity: 539 L/minEffective free air delivery: 377 L/minReceiver capacity: 90,0 Ltr.motor: 400 Vpower capacity: 3,0 kWweight of the machine ca.: 80,0 kg.dimensions of the machine ca.: 1040 x 450 x 850 mmDescription :- mobile craftsman piston compressor- High-quality processed 1-stage compressor block- with 2x cast iron cylinders and optimum efficiency- Finely ribbed cylinder and cylinder head- for optimum temperature dissipation- low compressor speed to reduce the compression temperature and minimizing wear and tear- Very low residual oil content in the compressed air thanks to precision piston rings- Generously dimensioned solid rubber wheels and castors at the front- the start-up relief takes place via a mechanical vent valve- Powder-coated compressed air tank in RAL 7035- Built in accordance with the European Pressure Equipment Directive- all fittings  ...

weight max. in kg: 1000 kgtable width: 800 mmstroke height: 190-1010 mmtable length: 1300 mmstroke of worktool slide: 40 mm/sek.weight: 220 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kgtable length: 1300 mmstroke height: 190-1010 mmtable width: 800 mmstroke of worktool slide: 22 mm/sek.weight: 280 kgFurnishing:- For ergonomic work at the optimal working height- With closed platform- Separate control unit with 3 meter cable, control buttons and emergency stop switch- Stepless lifting and lowering- Stable powder-coated steel construction- Guaranteed stability- Circumferential safety strips- Meets the safety criteria of EN 1570- High pressure cylinder with double safety functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems 3 pieces -min. height: 50 mm -max. height: 62 mm -Shipping/Price: complete -Dimensions: 165/75/H58 mm -Weight: 2.6 kg/piece

feed pressure: 10.0 barEffective free air delivery: 700 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 397 kg.total power requirement: 5.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price: 8.848 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.950 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 467 kg.total power requirement: 15.0 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 13.576 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 10.0 barEffective free air delivery: 1.000 L/minmotor: 400 V0: 250 Literweight of the machine ca.: 410 kg.total power requirement: 7.5 kWrange L-W-H: 1915 x 650 x 1640 mm Exhibition machine / not yet in use new BOGE SOLID model series ~ List price : 9.450 euros / special price on request Made in GermanyFurnishing:- with container and dryer / can be used immediately- Microprocessor control SOLID base control- Network pressure sensor- Belt driven drive system- low compressed air temperature due to effective aftercooler- lying underneath compressed air tank- including cold compressed air dryer automatically working with pre- and post-filter ( mounted )(also available with 7.5 bar)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mmWheel width: 500 ( 450 ) mmwork height max.: 880 (+/- 60) mm MADE IN GERMANY Description:- 3000 mm roller and measuring track type Exakt A standard- with digital position indicator el. connection 230 V 50 HZ with power pack- Display in mm display (measuring range: +/- 0.5 mm on 1,000 mm)- Measuring stop can be adjusted from the workplace by means of a hand wheel- with pneumatic brake for fixing the dimensions.- Stable material stop trolley, 12 ball bearings- on a large guide profile.- The stop is adjustable and can be folded back manually.- Basic version of roller and measuring track- in stable steel construction, all versions are stationary- The max.measuring length is the track length minus 450 mm- Ball-bearing support rollers Ø 60 x 2 mm- Galvanized conveyor roller with axis Ø 15 mm- Load capacity per meter of roller conveyor approx. 300 kg- Roller pitch 250 mm- Web  ...

through-put width: 580 mmworking heigth: 615 mmdiscs: 570 x 260 mmAir consumption: 400 l/min.air pressure: 2,7 - 5,5 bar0: 184 Liter0: Luft .. 3/8 Zollweight: 125 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1220 x 615 x 580 mm (LxWxH)- including sandblasting gun (grain size 0.149 - 0.250 mm can be used)- Including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

through-put width: 820 mmworking heigth: 810 mmAir consumption: 680 l/min.air pressure: 8,6 bar: 148 Liter0: Arm Loch 180 mmair clutch: 3/8 Zollweight: 160 kgrange L-W-H: ca. 1350 x 1300 x 1800 mmFurnishing:- Working space: 1110 x 820 x 810 mm (LxWxH)- very stable construction- including sandblasting gun (usable grain size 0.149 - 0.250 mm)- including container for blasting material- including dust extraction- freely movable foot switch- Lighting in the work area- Transport dimensions / packed: 1350 x 1000 x 1100 mm- Instruction manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area L-W-H: 1000 x 900 x 900 mmrange L-W-H: 1300 x 1750 x 2200 mmweight: 350 kgDescription:- Compact and elegant design- Easiest operation- low material consumption- optimal use of space- highly effective dedusting- efficient way of working- Environmentally friendly working without dust nuisance- controllable material consumption- Any conventional, dry abrasive is suitable as a blasting material such as B. corundum, steel sand, glass grain, glass beads, ceramic beadsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions:: innen 1160 x 580 x 580 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 120 kgtotal power requirement: 1,2 kWweight: 115 kgrange L-W-H: 1225 x 935 x 1640 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- With gas pressure springs for quick and easy loading and unloading- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Two fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Light switch with double function: suction and cabin lighting are switched on and off at the same time Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Container for ...

dimensions:: innen 1160 x 870 x 850 mmAir consumption: 400 - 800 l/min.air pressure: 3,4 - 8,0 barworkpiece weight: max. 150 kgtotal power requirement: 1,2 kWweight: 160 kgrange L-W-H: 1320 x 1200 x 1760 mmFurnishing:- Very large front flap that opens upwards- Suitable for various blasting materials e.g. quartz, glass ball, plastic ball, etc.- Integrated suction system with exchangeable air filter- Jet gun without a finger trigger The air flow is controlled by a foot pedal- Four fluorescent tubes (230 volts) in a separate housing with protective screen and exchangeable protective film- Switch for suction and cabin lighting Regulation of the working pressure via pressure regulator with manometer- Jet head (grain size 0.125 - 0.42 mm can be used)- Cross struts on the feet easy transport with the pallet truck- Container for blasting material- dust extraction- foot switch- Operating instruct ...

table length: 840 mmtable width: 600 mmampere: 60-120 Atotal power requirement: 15-23 kVAweight of the machine ca.: 2,75 tdimensions of the machine ca.: 2760 x 1110 x 1840 mWith controlled C-axis and 16-position tool changer.WORKTABLETable size: 840 x 600 mmDielectric above table: 360 mmMaximum workpiece weight: 1000 kgT-slots: 4 x 10 mmDistance table to quill without chuck (max / min): 595 / 180 mmWORKHEADX - Y travel: 565 x 400 mmZ travel: 415 mmX - Y - Z resolution: 0.001 mmC-axis resolution: 0.001 deg.Rapid traverse speed: 800 mm/minMax. electrode weight without rotation: 100 kgMax. electrode weight with rotation: 15 kgDIELECTRIC SUPPLYTank volume: 400 litersPaper candle filters: 4 piecesGENERATORDimensions (height x width x depth): 1800 x 600 x 920 mmWeight: 300 kgRated current: 60 – 120 APower rating: 15 – 23 kVADimensions (height x width x depth): 2760 x 1110 x 1840 mmWeight:  ...

filling capacity: 400 LiterUsable Volume: 300 Literfilling amount: max. 850 kgworkpiece sizes: max. 850 x 200 mmIndividual weight of workpiece: max. 30 kgturning speeds: 4.0 - 15.0 U/minInner drum width: 925 mmdrive motor: 380 Vweight of the machine ca.: 1950 kg.range L-W-H: 3100 x 1600 x 2000 mm good / well-maintained condition ()Description:- LIMA cleaning machines for long concrete formwork parts, formwork clamps for flame-cutting parts, plasma-cutting parts, laser-cutting parts for punching and sawing parts- environmentally friendly, cost-saving, low-noise- drive with 5-fold V-belt via worm gear- maintenance-free spherical roller bearings- entire machine is highly soundproofed- dust extraction installed as standard- drum running time adjustable- speeds variably adjustable- the drum can be moved into any position using jog mode- space-saving thanks to compact design- extraction system ...

thread dia.: 20 Mturning speeds: 400 U/minthread: M 4 - M 20 Mworking area: 1900 Rmax.working range: 200 Rmin.Description:The AT models have a radius of up to 1900 mm and theirconstruction a flexible workspace. For professional use.Easy to mount on a worktop.Furnishing:- including 7 thread cutting inserts• M3 20111812 DIN 371 19• M6 20111823 DIN 371 31• M8 20111824 DIN 371 31• M10 20111826 DIN 371 31• M12 20111827 DIN 376 31• M16 20111829 DIN 376 31• M20 20111831 DIN 376 31- Control valve with lubrication- Including air motor- Adapter connection size 2- The cutting head can be pivoted vertically downwards by 90 °- The cutting head is pivoted and rotatable through 360 °- Operating instructions in German without the perforated table as per Fig.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System Marking Laser FOBALAS F 94S Laser Marking System Laser Type: FOBALAS 100 CW/QS - ND: YAG Performance class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Volts: 15 V Wavelength 1064 Hours: 43927 More items - new and used - can be found in our shop! International shipping costs on request!

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Dimensions total: 90/80/H70 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws-Interchangeable jaws: 3-piece soft top jaw set-Width: 20 mm-Dimensions total: 84/63/H38 mm-Total weight: 1.1 kg

max. wheel diameter: 400/500 mmCNC-Control: GE FANUC Series 160i-M pinion diameter - max.: 400 mmcrown gear diamter max.: 500 mmx-axis: +/- 70 mmy-axis: 200 mmz-axis: 200 mmaxis angle: 90 Gradspeeds:: R 0 - 3000 / T 0 - 5000 1/minrated current: 30 kVAweight of the machine ca.: 6,2 tdimensions of the machine ca.: 3,2 x 2,5 x 2,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet - Tool cabinet. Drawer cabinet Stumpf Series 3000, sturdy design, total load 4400 N -6 drawers: layout/height see photos -Load capacity: see photo type plate -lockable: with key -Dimensions: 500/500/H1000 mm -Weight: 43 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in very good condition and ready for operation. An on-site inspection is possible.

We are selling our die-sinking EDM system here because of a new acquisition. This is a machine that was sold by the company MATRA at that time. This is a DECKEL DE35C. In the meantime, the company Exeron has taken over the service. The travel is: X=600mm Y=400mm Z=400mm The die-sinking EDM system has a 4-fold electrode changer The control system on the machine was recently overhauled, the power supply and the UPS were renewed. The machine was also otherwise continuously checked and maintained by the Exeron company in the event of malfunctions. Machine is running and is still on the power for a possible test. Operating hours are: 33196 hours. Various tool holders can be part of the price negotiation.

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 1 ...

With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible.

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.