other machines and plants used for sale (14,190)

Dryer type SD2250/426W Properties: Type SD2250/426W Machines Serial No. 021 / 15089 /07 Total length 1300 mm Width 1400 mm Total height 2000 mm Engine power 2.9 kW Description: Refrigerant: R 134a 7.5 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 380-400V3 ͂/50Hz 2.90 kW 20A / IP 54 RWTÜV Reg. No. 2540/98

Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW

Compressor Type Q52 - 8.0 W Properties: Type Q52 - 8.0W Identification number 052-000103 Order no. 14988/ 14989 Compression medium AIR/LUFT Length 2500 mm Width 1800 mm Total height 2000 mm Weight 2600 kg Volume flow 51.6 m³/min Suction pressure 1 bar Full load current 525 A Step pressures 8 bar g Speed 60600 min ̄¹ Installed motor power 300 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz

Evaporator/ Evaporator/ Evaporation 52,000 litres of milk /at 7.5% - 10% fat content Description: At 7.5% fat content, 50% water = 26,000 litres At 10% fat content, 66% water = 17,333 liters

Counting machine tested and cleaned.

Feeder WGOMA VS 34 -used-incl. Tripod---------- Technical data ----------castors: 3 pieces, number of speeds: 4

Table milling machine MARTIN T21 -used-finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1,000 x 930 mm, Spindle diameter: 30 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Suction nozzle Ã: 120 mm, Weight: 630 kg

Table milling machine SCM T130 NPS -used-fine-adjustable milling fence, dispensing and slotting table, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1,080 x 750 mm, spindle diameter: 30 mm, speeds: 3,000/4,500/6,000/7,000/10,000 rpm, suction nozzle Ã: 120 mm, suction nozzle à bottom: 120 mm

Slotted hole drilling machine SAMCO AS 16 -used-engine movable, dowel drilling device---------- Technical data ----------Work table dimensions: 550 x 285 mm, drilling width: 190 mm, drilling depth: 120 mm, speed: 2,840 rpm, motor: 1.5 kW, weight: 220 kg

A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

Technical data of the steel girder: Manufacturer: Stow Type: Pal Rack NS The scope of delivery includes: 01x Steel beams, used Material colour: orange Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Overall length: 3,835 mm Note: The steel girders were attached to a length of between 2,700 - 2,800 mm welded on a plate. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH) Since these are second-hand goods, scratches, damage, welds or rust roots! General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.

A cutting, creasing, and scoring machine Bahmüller is available. Passage width: 2300mm, min. strip width: 230mm, passage speed: 150m/min, cutting and creasing roller diameter: 127mm, height adjustment: 20mm, table dimensions X/Y: 2600mm/1480mm, cutting width: 2200mm, circular knife outer diameter: 220mm, coarse scoring outer diameter: 200mm, min. coarse score distance 1/2: 60mm/0mm, fine score distance 1/2/3: 28mm/5mm/15mm. Processes: cutting, coarse scoring, fine scoring, scoring with version R, vacuum feed with version V, and ruler insertion with version L. Machine dimensions X/Y/Z: approx. 2850mm/2600mm/1200mm, weight: approx. 4800kg. Documentation available. An on-site inspection is possible.

Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools

Right-angle gears, as good as new

Pneumatic diverter, electric, as good as new

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour

Rotary valve 1.1 kW, as good as new

Hardly used, in very good condition. There is no longer any need for sale.

Gear Motor - Motor: Motovario, Gearbox: Neri Motori 2.2 kW

Right-angle gears, as good as new

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground

800 litre cleaning tank/ storage tank made of V2A Properties: Volume 800 L Material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm Inner diameter 1000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Last Use: Chemical Industry Description: Topsoil: curved bottom Threaded Socket DN 65 Manhole DN 400 Agitator with steam heating inlet Tank cylinder: Beading Subsoil: Cone base screwed on with pedestal forward-drawn residual drain pipe with disc valve DN 50

Geared motor

Reach: 1960mm, payload: 60kg, axes: 6, positional repeatability: +/-0.06mm, path repeatability: +/-0.09mm, base dimensions X/Y: 920mm/640mm, weight: approx. 1040kg, operating hours: 32367h. The Profinet IO device module is missing. Documentation available. An on-site inspection is possible.

Sliding table saw ALTENDORF F 35 Type 3 - 1000-Exhibition-Machine-5.5 kW (7.5 HP), 3 speeds, Motorized height and swivel adjustment, Large protective cover, Double trolley 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, Cutting width 1,000 mm, Angle mitre stop 3,450 mm, without length compensation, Table top extension/table top extension:, With high-quality CDF surface---------- Technical data ----------Swivel range: 0 - 46 Â, Carriage length: 3,200 mm, Cutting length: 3100 mm, Cutting width:

Cordless angle drill, cordless angle drill, -Manufacturer: Bosch, cordless drill type GWB 7.2 VE -incl.: charger -Quantity: 1x drill driver available -Price: per piece -Transport dimensions: 240/180/H240 mm -Weight: 6 kg