other machines and plants used for sale (14,190)

X-axis: 400mm, Y-axis: 250mm, Z-axis: 200mm, table dimensions: 560x426mm, acceleration: 500mm/s², resolution: 0.1μm, measuring temperature: 20 ±0.5°C, max. workpiece weight: 50kg. Length: 930mm, width: 870mm, height: 1570mm, weight: 530kg. On-site inspection is possible.

An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible.

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Year of construction 2000 Inclusive Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates

Properties: Length 1000 mm Width 650 mm Total height 1000 mm Operating temperature range 80° C Working overpressure range 5 bar Volume 2000 L Material V2A (AISI 304) 1.4301 Fabr No. 30178 Ab. Operating overpressure 5 bar Ab. Operating temperature 80°C

Volume 16300 L Material V2A Isolated design Horizontal design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Description Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food

1 horizontally installed NH3 collection tank for the 4 chillers in the room Manufacturer: Witt Content: 2,254 l. outside with black insulating material surround. standing on frame with ammonia high-pressure valve with the Fittings.

Elements: Double-sided grinding machine 2500 C4/0E. General equipment per machine: motorized width adjustment with automatic positioning, coolant pump for coolant recirculation, 1x solenoid valve for water supply, manual glass thickness adjustment, transport belts with Low-E kit. Automatic destacking of large glass formats (6000x3210mm) from main production, which are then cut into corresponding individual panes. Further processing: individual panes can be flexibly processed further (cutting, grinding, drilling). Cleaning: afterwards the panes pass through an industrial washing and drying unit. Quality control: after cleaning, an automatic quality control is carried out using a scanner. Tempering process (ESG): panes can be fully automatically destacked or optionally passed through a tempering furnace. In the furnace, the glass is heated to approx. 600°C and then cooled to produce tempe ...

Complete Zn drum system, double row, footprint 21 x 7 m, built-up operational condition any components NEW and unused (only test run with water) 11 stations zinc bath à approx. 0.8 m³ / wet turner / 19 static rinsing, pre-- post-treatment / loading - unloading Manufacturer: Fey Galvanotechnik, Solingen / year 2020 (individual components partly 2019) The system essentially consists of: ATB S7 control system in 12x Rittal cabinets, Simatic HMI Touch Tank park: 1x stainless steel tub (double E-def), 15x PP bathtubs (triple, double and single tubs) Drain ball valves, level bar probes, temperature sensors Immersion bath warmer: 20x double E-def, 16x single E-def, 12x zinc bath, 2x zinc electrolyte attachment, 9x (3x each) thick layer, blue, yellow; Rotkappe T-QS 630/1,25-230Ws, 1250W Oil separator (degreasing): Stainless steel Friess W20 31x drum units: filling volumes up to  ...

General: Year of construction 2002 Power 1.5 kW Weight 172 kg

Progressing cavity pump SCHUBAG 4,300 l/h with pre-prepared hopper Properties: Length 2750 mm Width 500 mm Total height 950 mm Weight 290 kg Motor power 5.5 kW Working pressure range 12 bar Material V2A (AISI 304) 1.4301

Infinitely variable variable with variable motor Dimensions: Length: 3100 mm Width: 820 mm Height: 1300 mm

Flow rate: 143 m³/h Operating pressure test: 32 bar Motor: 11 kW - With connections: suction side DN 65 and pressure side: DN 80 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1020 mm Width: 520 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Flow rate: 6,300 l/h Operating pressure test 1.9 bar Motor: 5.5 kW Connections: suction side and discharge side: DN 65 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 750 mm Width: 500 mm Height: 1040 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Centrifugal pump FRISTAM Capacity: 2,500 l/h Flow rate: 2,500 l/h Operating pressure test 2.3 bar Motor: 2.2 kW Connections: suction side and discharge side: DN 80 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 850 mm Width: 500 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.

Description: Operating pressure test: 6 bar Engine: 37 kW - With connections: suction side: flange DN 80 and pressure side: flange DN 150 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 650 mm Height: 1120 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Description: Rotary Lobe Pump Flow rate: 2.0 m³/h Operating pressure test 0.8 bar Motor: 1.1 kW - With connections: suction side DN 40 and pressure side: DN 40 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1100 mm Width: 620 mm Height: 1100 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Eccentric screw pump with 19 m³/h capacity Description: Operating pressure test: 6 bar Motor: 7.5 kW - With connections: suction side: flange DN 85, Print side: DN 100 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1200 mm Width: 410 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

For sale: Workshop crane KR-F50H without ballast filling Specifications: Manufacturer: Meiller (DE)· Metrics: Chassis width 810 mm Chassis length 1330 mm Overall height 1740 mm Chassis width: 810 mm Chassis length: 1330 mm Height/ Boom: - Height of hook boom extended: 3200 mm - Height of hook boom inserted 2400 mm Other: - Wheel Ø 200 mm Polyamide tyres -Load capacity: 500 kg -Load capacity at boom radius kg/mm: 500/830 435/980 370/1130 330/1280 300/1430 275/1580 250/1730 Equipment: 1x Hydraulic hand pump with hand lever and finely adjustable drain valve Chassis securing by foot brake RAL 2000 lacquer (orange-yellow) With minor rear-end collision damage or transport damage. Otherwise like new, never used! NP:4628 Euro

3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.

1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

1-deck swashscreen with a screening area of 0.72 m² per deck, drive 1.5 kW via V-belt (engine renewed). Including 1 piece sieve insert (current mesh size approx. 20 mm).

An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible.

Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible.

Printing units outside/inside: 2/1, doctor blade units: 3, production capacity: 800 envelopes/min, window unit: Mini-Splice 356 CMG, roll/splicer: Winkler + Dünnebier 191, web guiding: BST EKR 1000, gumming: standard remoist (moisture-activated gumming for sealing flaps), ink pumps: 2, extraction: window punching waste. Documentation available. An on-site inspection is possible.

Batch mixer for the production of chemical products, foodstuffs, building materials, plastics, animal feed, etc., max. usable volume: 2,000 l., parts in contact with the product made of stainless steel 1.4301 (AISI 304), mixing unit drive 30 kW (with external fan), equipped with 2 cutting rotors (18.5 kW each), 2 liquid lances for injection directly onto the cutting rotors and pneumatic spiral cleaning. Emptying via pneumatically operated bottom flap. The scope of supply also includes: control cabinet with frequency control for the mixing unit (0.25 to 2.8 m³/s circumferential speed), weighing frame with 4 load cells, 4 machine feet to raise the mixer body, jet-cleaned cartridge point filter with 4 m² filter area and 3 kW blower (ATEX, 2,580 m³/h air flow), silencer, water dosing and technical documentation. Available for an extra charge: Suitable frame for filling the mixer  ...