other machines and plants used for sale (14,191)

400 V / 50 Hz

Supply air system Al-ko, Alko Therm AT4 41x32 Bj. 2016 2 pieces For sale now. Fully functional.

Sliding table saw ALTENDORF F45 -used-double trolley, swivelling, rip fence with fine adjustment, boom table, table extension anodised aluminium, table extension anodised aluminium, angle mitre stop, upper protective cover narrow and wide---------- Technical data ----------swivel range: 45 Â, carriage length: 2,500 mm, cutting width: 800 mm, max. saw blade Ã: 450 mm, motor power: 5.5 kW, extraction nozzle Ã: 80 / 120 mm

A bucket drop tester Lansmont for performing standardized drop tests to evaluate product shock resistance is available. Test load: 80kg, max. package depth: 610mm, drop height range: 305mm-1800mm, flatness accuracy: +/-2°, guide rod diameter: 76mm, plate thickness: approx. 13mm, machine dimensions X/Y/Z: approx. 920mm/1410mm/2640mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.

Air compressors from Kostal Industrie Elektrik

Water-cooled rectifier from plating electronics

Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.

Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible.

A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible.

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

Granulator Manufacturer: Retsch Type SM 1 The Retsch type SM 100 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry.

Granulator Manufacturer: Retsch Type SM 100 The Retsch type SM 100 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry. Key features of the Retsch SM 100: 1. Grinding principle: The granulator works on the principle of cutting crushing. Thanks to the integrated blades made of high-quality stainless steel, precise and even shredding is achieved. 2. Application: The SM 100 is ideal for shredding soft to medium-hard materials, such as plastic, paper, food and many other organic and inorganic substances.

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Composed of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories

BR-G17 18038 Testing Machine Manufacturer: Kirschenhofer Including Yaskawa ERAR-1000-06VX8-E10 robot Camera The Kirschenhofer testing machine type BR-G17 18038 is a specialized device that was developed for automated test processes in industry. It is particularly suitable for quality control of various products and components. Here are some of the key features and functions of this testing machine: Main features of the Kirschenhofer BR-G17 18038: Automation, versatile inspection methods, high speed, user-friendly user interface, robust design, data management.

Tensile and compression tester Manufacturer: Zwick Type Z2.5/TN1S Inclusive Force transducer 2 kN Pneumatic Specimen Holder Pneumatic control unit testExpert testing software Upgrade Packet testExpert II Documentation Calibration certificates Documents available

The complete conveyor technology is from CSF. The control system of all system components including a visualization, all control cabinets, all FUs and many other components have been completely renewed in the last 5-7 years. The plant was decommissioned in Q1-2025, but can be restarted at any time if necessary. All system components are on standby and can be immediately put into operation and presented to a potential interested party. The system has one hand and two automatic cabs. The complete part size 7000x2300x800 mm can be moved and coated across all cabins. The system is designed in such a way that all 3 cabins can coat at the same time. Hanger throughput approx. 14 hangers per hour Water dryers as well as powder dryers are each heated indirectly via an oil-air heat exchanger. The system has no maintenance backlog and has been regularly maintained by our own maintenance ...

CompaCLEAN III, For customers who prefer traditional dishwashers, CompaCLEAN offers the type of cleaning many are accustomed to while minimizing the shadow effect thanks to its unique linear tangent spray technology. PCBs are loaded into a typical kitchen dishwasher like plates., Application: Standard SMD assemblies., ���Capacity: Medium volume, ���Contamination solubility: slightly too moderate, To achieve sufficient cleaning quality and minimal cross-contamination, perfect filtration is required. Each PBT cleaning machine uses an independent closed circuit with a dedicated pump and filter system for each individual process step., CompaCLEAN can be easily configured to clean any size and shape of part by selecting different clamping solutions for larger or smaller PCBAs and using a single or double basket setup., Subject to prior sale, changes and errors!, Application: Stand ...

A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible.

A fully automatic SPEA bed-of-nails in-circuit tester for SMEMA production lines is available. Type: inline ICT tester, slots: 2x768/Core, conveyor width range: 50mm-380mm, conveyor length: 450mm, resistance measurement range: 1mΩ-1GΩ, capacitance measurement range: 0.5pF-1F, inductance measurement range: 1µH-1H, dimensions X/Y/Z: approx. 900mm/1000mm/1750mm. Including various feeders (8x2-56). Documentation available. An on-site inspection is possible.

630 liter MÖSCHLE storage tank cubic upright in V2A Description Tank topstock: Threaded socket 1 x D 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 430 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet Properties Volume 630 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 1100 mm Inner diameter 600 mm Surface marbled on the outside Number of feet 4 Manufacturer: Möschle

We want to reduce our machinery and therefore have a Statomat Elmotec bandage machine BK2 from 2018 for sale. The machine is equipped with a stator mount for Ø120mm. If you are interested in our machine, please feel free to send us a price offer.

Complete car wash for sale only for self-dismantling and self-collection. - 4 boxes to wash yourself, each with a stand-up high-pressure pump with steam jet and brush. Dimensions per box: 4.5 x 6 meters - Continuous washing system: chain shaft is 25 m long, squat pressure water 160 bar Nilfisk, 4 dosing pumps. The car wash is for sale complete with office, gas heating and complete accessories (see pictures). The car wash can be visited at any time. If you have any questions, please do not hesitate to contact me by phone.

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

Edge Grinding Machine Gartner FLK 4 -used-incl. Mitre stop---------- Technical data ----------sanding belt width: 200 mm, sanding belt length: 2,350 mm, dimensions work table: 870 x 400 mm, belt speeds: 4, suction nozzle Ã: 80 mm, motor: 3 kW

Aluminum pickling / zinc plant

Procedures used Nickel Chromium Nickel phosphorus Sulfuric acid pickling Software ICOM Automation GmbH

A CNC contour processing system HML for precise edge processing and contour milling of technical laminates or printed circuit boards (PCBs) is available. Weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Intensive mixer with hydraulically fold-out tool bridge, usable filling per batch (max.): 75 l. / 120 kg, emptying via central bottom flap (hydraulically operated), tools: star agitator and wall-to-floor scraper. Agitator drive: 11.0 kW via V-belt, drum drive: 3.0 kW via friction wheel, hydraulic unit: 0.75 kW for lock operation and tool bridge. Including a modern control cabinet with Yaskawa frequency converters for agitator and drum drive.