other machines and plants used for sale (14,191)

A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible.

A soldering system SMT with pin chain conveyor for the printed circuit board industry is available. Temperature: 300°C, heating time: approx. 30min, convection zone: 1660mm, cooling zone: 1030mm, process length: 2780mm, usable width range: 10mm-460mm, clearance height top/bottom: 30mm/30mm, max. speed: 1.8m/min, machine dimensions X/Y/Z: approx. 3300mm/1350mm/1550mm, weight: approx. 1100kg, operating hours (estimated): approx. 55000h. Documentation available. An on-site inspection is possible. Expected to be available from Q1 2026.

An X-ray inspection device Mekitec for the food industry is available. Measurement device type: Rad Eye B20, max. power: 60kV/1.66mA/100W, method: inline inspection, test object: packaged food products, tunnel clearance X/Y: approx. 250mm/100mm, belt length: 1200mm, belt width: 250mm, max. belt speed: 1.3m/s, max. product weight: 5kg, machine dimensions X/Y/Z: approx. 2000mm/550mm/1200mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

Two identical swing arm robots Bosch are available. Reach: 300mm, quill stroke: 200mm, quill diameter: 20mm, max. operating pressure: 8bar, max. payload: 5kg, control panel: Bosch PHG 2000, weight: approx. 50kg. Documentation available. An on-site inspection is possible.

We offer a high-performance mobile extraction system for painting work. The offer includes a new filter mat. Engine power 2.5 Kw Device can be tested on site. Forwarding possible by arrangement. No indication of VAT in accordance with § 19 UStG (small business regulation).

Properties: Volume 1530 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1250 mm Cylinder height 1800 mm Diameter width 850 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 430 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet

Properties: Volume 2900 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 3400 mm Cylinder height 1800 mm Diameter width 800 mm Inner diameter 1300 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 430 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 Forward-drawn residual drain pipe with disc valve DN 32 4 feet

Properties Volume 1530 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 850 mm Inner diameter 2000 mm Surface on the outside marbled at the front Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 430 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet

Properties Volume 2160 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 1200 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet

An HPLC separation column YMC for the analysis and purification of chemical substances in liquid samples is available. Phase: C18, particle sizes (analytical): 3µm/5µm, particle sizes (preparative): 10µm/15µm/20µm/50µm, pore size: 12nm, surface area: approx. 330m²/g, carbon content: 14%, pH range: 2–7.5, max. operating pressure: 200bar. An on-site inspection is possible.

Dressing MARTIN T51 -used-noise-insulated table lips, joining bar, motor brake---------- Technical data ----------planing width: 51 mm, table length: 2,520 mm, max. chip removal: 16 mm, diameter planing shaft: 120 mm, number of blades: 2 pieces, swivel range dressing stop: 0-45 Â, suction nozzle: 140 mm, motor power: 4.8 kW

Thick SCM S 63 -used-link pressure beam, under-table roller, separate feed motor---------- Technical data ----------planing width: 630 mm, number of knives: 4 pieces, passage height: 235 mm, feed speed: 6 /9/12/18 m/min., suction nozzle Ã: 180 mm, weight: 1035 kg

Properties: Volume 1500 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1500 mm Cylinder height 1800 mm Diameter width 800 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description: Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 forward-drawn residual drain pipe with disc valve DN 32 4 feet

Subject to prior sale - errors possible! Internal reference number: D-1143-5

Thickened SAC RS/530 -used-link pressure beam, electric height adjustment, under-table roller, separate feed motor---------- Technical data ----------planing width: 530 mm, number of blades: 4 pieces, passage height: 240 mm, feed speed: 7 / 14 m/min., suction nozzle Ã: 140 mm, motor: 4 kW, weight: 840 kg

Screw compressor, compressor, compressed air unit, compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Manufacturer: JUBA, compressor with dryer -Compressor: Type JB 1500WX4 -Volume flow: 520 l/min -Engine power: 6 kW -Pressure: 7 bar -Tank capacity: 160 l -Dryer: Type JB-10AC 0.5 kW -Drying capacity 1.5 m³/min -Individual components: see photos -Transport dimensions: 1320/820/H830 mm -Total weight: 180 kg

Manufacturer: Wagner / J. Wagner GmbH Type: SuperFinish SF 23 Plus Voltage: 230 V AC Frequency: 50 Hz Motor power: 1.3 kW Maximum flow rate: 2.6 l/min Maximum operating pressure: 180 bar Maximum nozzle size: 0.023" Weight: 29 kg Technology: Diaphragm pump (airless) Suction: Top tank or rigid suction system Workable materials: varnishes, primers, glazes, impregnations, oils Special: Brushless motor, low-maintenance, robust design for professional applications

bale press, which had been used for cardboards. serial numbers: PES354653, PES354654 pressing force 50 tons Bale Size: 1200 x 800 x 1100 mm Bale Weight Paper: 350 - 450 kg

BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

A vacuum mixer/homogenizer Olsa for the cosmetics industry is available. Usable volume: 400L, total volume: 470L, vessel diameter: 850mm, vessel height: 730mm, discharge valve diameter: 30mm, inlet nozzle diameter: 25mm, speed: 30rpm, material inside/outside: AISI316/AISI304. Documentation available. An on-site inspection is possible.

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Combination machine FELDER BF6-26 -used-circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, self-adjusting knife shaft---------- Technical data ----------planing width: 260 mm, number of knives: 2 pieces, planing shaft Ã: 86 mm, passage height: 220 mm, dressing table length: 1300 mm, cutting width: 780 mm, swivel range circular saw: 0- 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 0-45 Â, useful length milling spindle: 120 mm, max. cutter diameter: 220 mm, max.

Ceiling laser LAP LASER CAD-PRO -used retrofit set suitable for:, e.g. HOLZ-HER ProMaster, Dynestic, Epicon, incl. Ethernet gateway LAP, 4 targets, swivel, with bracket---------- Technical data ----------Projection color: green, Supply voltage: 24 V DC, LAP connection cable: 25 m

Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg

Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: unfortunately without type designation -Operating pressure: 0-16 bar -Dimensions: 120/100/H95 mm -Weight: 0.4 kg

Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: LR-D-MINI -Operating pressure: 0-16 bar -Pressure: max. 16/12 bar, see photo nameplate -Number: 3x valves available -Price: per piece -Dimensions: 110/80/H95 mm -Weight: 0.5 kg/piece

Pressure control valve, pressure control directional valve -Manufacturer: Festo, pressure regulator valve -Type: LR-D-7-I-MINI 192299 -Operating pressure: 0-4 bar -Pressure: max. 16/7 bar, see photo nameplate -Number: 3x valves available -Price: per piece -Dimensions: 110/80/H95 mm -Weight: 0.5 kg/piece

Filter control valve, on-off valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance device combination, filter control valve -Manufacturer: Festo, maintenance unit D-MIDI -On valve: HE-D-MIDI / HEE-D-MIDI-24 -Branch module: FRM-D-MIDI -Control valve: LFR-D-MIDI -Pressure: max. 16 bar -Individual components: see photos -Dimensions: 340/100/H270 mm -Weight: 3.1 kg

Pressure control valve, pressure control directional control valves-Manufacturer: Festo-Type: MS4-LRB-1/4-D6-A8-AS-Operating pressure: 0-10 bar-Number: 1x valves available-Price: per piece-Dimensions: 130/60/H40 mm-Weight: 0.22 kg

Properties: Volume 10500 L Material V2A (AISI 304) 1.4301 Vertical design Total height 5000 mm Diameter width 1800 mm Surface marbled on the outside Number of feet 4 Last Use Food Description: Tank topstock: Clapper bottom Crane eyelets Cylinder: Level indicator without scale in plastic Threaded nozzle DN 60 and disc valve DN 60 Manhole 300 x 400 mm Tasting tap Ladder hooks Tank underbody: Clapper bottom forward-drawn residual drain pipe with disc valve DN 60 4 feet