649 milling machines wood used for sale

SAUTEREAU TD 82Double tenoner equipped with two Ø 180 mm tool shafts with manual carriage.Rotational speed: 3000 rpmPressers: with adjustable stops Table: cast iron with integral enclosureMotors: three-phase 380 VSuction: Ø 2 × 120 mmSerial number: 2459 TD 116Condition: Good conditionDimensions (mm): 3500 × 1600 × 1600Weight (kg): 900 Auction-ID: A1-39769-17

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40575-24

travel -x axis: 630 mmtravel -y axis: 765 mmtravel -z axis: 600 mmcontrol: MAZATROL Matrix number of spindle speeds: 18.000 U/mina-axis: +30 ~ -120 °c-axis: +/- 360 max. working diameter: 730 x 500 mm0: 500 mmnumbers of positions in the tool changer: 80 tool taper: HSK 63T 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with a rotary function (turntable)The machine is in a well-maintained condition and can be inspected under power at any time in the factory location.The machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II TThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

reus: 8000 min-1 U/minWeight: 5500 kgYear: 2007 Control: Siemens 840D Dimensions (L/W/H): 3600 x 2800 x 2400 mmtravel -x axis: 1035 mmtravel -y axis: 560 mmtravel -z axis: 510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of knives: - z=Diameter: - mmLength: - mmShank diameter: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1.200 x 780 mmMotor output: 7,5 kWSpindle diameter: 30 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1,5 tweight of the machine ca.: 400 kgdimensions of the machine ca.: - mAccessories for a 4th axis machining centerused on a HEDELIUS machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mmy-travel: 650 mmz-travel: 560 mmControl: 3D HEIDENHAIN TNC 640 table-size: 800 x 650 mmrotary table: 650 mmtable weight: 600 Kgc-axis: 0,001(+/-360) °b-axis: -120+120 °Tool diameter: 840 mmtoolpiece height max.: 500 mmrapid taverse: 40.000 mmturning speeds: 20.000 U/minTool adapter: HSK-A63 Torque: 130/86 0engine output: 35 kWInternal cooling system: 40 barMachine on: 26.972 hSpindle hours: 11.412 htool change unit: 60 pos.Internal cooling system: 40 bartotal power requirement: 49 kWweight of the machine ca.: 11.600 kgdimensions of the machine ca.: m-Tool charger-No. Positions in the tool charger 60-Tank with 500l paper filter-Active refrigerator cabinet-Infrared measuring probe Heidenhain piece-Blum laser probe measuring device-chip extractor-Cleaning gun with 2 bar 40 l/min pump-3D quick set-HEIDENHAIN HR-510 Portable Steering WheelThe data for this ad was created wi ...

x-travel: 1035 mmy-travel: 560 mmz-travel: 510 mmControl: Heidenhain type: iTNC 530 table surface area: 1400x650 mmworkpiece weight: 1000 kgTool changer: . spindle taper ISO: SK40 Spindle capacity: 10 KWturning speeds: 8000 U/mintotal power requirement: 20 kVAweight of the machine ca.: . tdimensions of the machine ca.: . mSerial number: 15425033554Chip conveyor2 hydraulic visesOperating hours: 53005Spindle hours: 12233The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tou ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 400 x 1600 mmMotor output: 21 kWWeight: 4000 kgtool taper: ISO 50 table load: max 1,5 tmovement longitudinal: 200 ... 1400 mmmove cross: 55 ... 505 mmmove vertical: 100 ... 525 mmspindle turning speed range: 45 ... 2240 U/minweight of the machine ca.: 0,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis GANNOMAT ProTec 571 was manufactured in 2017, featuring a precise steel worktable and a working stroke length of 1000 mm on the X-axis. It includes a drilling unit with 13 vertical and 6 horizontal spindles, a milling unit with a power range of 3000-18000 rpm, and a grooving unit in Y. If you are looking to get high-quality woodworking capabilities, consider the GANNOMAT ProTec 571 machine we have for sale. Contact us for more information.

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

ROOT START REDUCER LOG END REDUCER60 m / min for logs with diameter 60 cm - 4 logs / min at roller conveyor feed rate 30 m / min for logs with diameter 60 cm - 3 logs / min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm measured 1500 mm from the root and length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm

According to the PDF prospectus!

Kettenstemmer (chain Mortiser) carpentry: â?¢ handy Kettenstemmer with strong pulling engine â?¢ Adjustable depth stop to 125 mm â?¢ Adjustable RIP fence 25-180 mm â?¢ Chain guide with integrated lubrication â?¢ Housing, handles and base plate made of sturdy die-cast aluminium â?¢ Security Beidhandschalter for the protection of the user â?¢ Including high-quality chain set Technical specifications: â?¢ wattage 1350 Watts â?¢ Idling speed min-1 3,400 â?¢ Maximum mortising depth 100 mm â?¢ Press width 40 mm â?¢ Dimensions 261 x 320 x 382 mm â?¢ Weight 10 kg Scope of delivery: â?¢ power cord 5 m â?¢ RIP fence â?¢ Open end wrench â?¢ Allen key â?¢ Chain set (sword, chain, grea ...

BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...

) Mortising depth 100 / 150 mm-) nominal no load speed 1/min - 4050) rated power 2500 W-) weight 8.7 kg-) universal motor 230 V / 50 Hz transverse stop best. No. 200954 1 Allen key 4 mm best. No. 093074 1 Allen key 8 mm best. No. 093070 1 connection cable 10 m best. No. 087612 â?¾Zapfenlöcher â?¾Materialeinsatz such as: Solid wood, laminated wood â?¾Ergonomische handle and switch arrangement - for safe, efficient and energy-saving work. â?¾Geringes weight - ideal for use on construction sites. â?¾Extrem powerful motor - for high efficiency and saving time. â?¾Einzigartiges light-weight 8.7 kg. â?¾Der long cross fence holder with large adjustment range allows you to work on large-scale wood. â?¾DAS clamping system in the LS 103 EC allows a quick chain change. Even a tighten ...

Kervenfräse (carpentry): The machine is almost as good as new, and there is also a warranty on the machine! Technical data "MAFELL Kervenfräse ZK 115 EC": -) Smoothing depth: 0-83.5 mm ) Milling tool - standard: 150 x 115 mm mm -) Swivelling range: 0-60 ° -) Nominal no-load speed: 4050 1/min -) Rated power: 3000 W ) Weight (with standard milling head): 21.1 kg ) Universal motor: 230 V / 50 Hz Scope of delivery: 1 Kervenfräskopf, complete, Ã? 150 x 115 mm 1 RIP fence 1 spanner 10 mm 1 wrench, Torx T-15 1 connection cable 10 m

Spindle moulder with tilting spindle, table with extensionsTable length: 2,50 m.Support rail in the frontSpindle diameter: 35 mmMotor 5,5 kWSpindle speed, manual adjustment, 3000/4500/6000/7500/10000 r/min

Cast iron tableLateral tenoning carriageSpindle diameter 50 mm.Table 110 x 90 cmSupport rail in the frontMotor 4 kW5 spindle speeds: 2900 - 4400 - 6000 - 8000 - 10000 tr/min

Spindle moulder with fixed spindle, table with extensionsTable length: 1750 x 500 mmSupport rail in the frontsiko reading for setting input and output supportLateral tenoning carriageSpindle diameter: 50 mmHeight motorised with digital readoutMotor 5,5 kWSpindle speed,3000, 4500, 6000, 8000, 10500

Spindle moulder with fixed spindle, table with extensionsTable length: 2,50 m.Support rail in the frontSpindle diameter: 50 mmMotor 5,5 kWSpindle speed, manual adjustment, 4000/6000/8000 r/min

height of spindle adaptable: by handspindle diameter: 35 mmmotor: 3/4 kW

Milling spindle diameter: 50mmUseful span: 240mmMilling spindle speeds: 4400/6400/7000/9400 tr/minMotor: 7.5 kWTable dimensions: 1100 x 800mmMax milling diameter: 220mmExtension table: 200x1000mm + 200x2000mmAttachments: 2pcs 145x500mmDust extraction diameter: 150mm

max tenon width: 115 mm + thicknessmin and max tenon thickness: 0-42 mmmin and max tenon depth: 10-45 mmTable adjustments: vertical: 80 mmtilting upwards: 0° - 15°tilting downwards: 0° - 30°side tilting: 0° - 20°fence on table for mitre positioningcutter spindle motor: 3 kWmotor for drum rotation: 0,75 kW