649 milling machines wood used for sale

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Sueri Alfredo TS80 Single Spindle Moulder with Felder F38 Power Feed Auction-ID: A7-40792-22

Auction-ID: A7-39846-8

SAMCO C/30SS-STCombination machine with vertical router and integrated circular saw.Router: shaft Ø 30 mm – speeds 3750 / 7500 rpmSaw: Ø 250–315 mmMotor: 3 kW – 380 V – 50 HzInclination: 0–45° by graduated handwheelTop: one-piece cast ironSuction: Ø 100 mmSerial number: 850586Condition: FunctionalDimensions (mm): 1300 × 1000 × 1200Weight (kg): 400 Auction-ID: A1-39769-20

Total installed power 7.50 KW Maximum workpiece width approx. 400 mm Workpiece length from 200 mm to 1500 mm Drawer front thickness from 7 mm to 50 mm Drawer side thickness from 8 mm to 20 mm Loop spacing approx. 25 mm 8 milling heads, rotation speed 16000 rpm Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-38450-45

Blade length approx. 175 mm, motor power approx. 1.5 kW, landing gear, incl. various accessories Auction-ID: A7-39274-7

MECANOBOIS – Double TenonerDouble Tennoner with 2 Opposing Shafts and Pressers.Feed: manual by trolley on slideEnclosure: integral aluminiumTable: ground cast iron with adjustable guideCondition: Good conditionDimensions (mm): 3500 × 1500 × 1600Weight (kg): 900 Auction-ID: A1-39769-16

Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40439-61

Applying to make unprocessed parts of machine, mould shelf which is not easy to move. It is convenient and easy to operate. It is easy to replace stand tungsten steel quadrilateral edge, and can use an old cutter. It is accurate and with perfect surface. The max. chamfering range is 2mm to 3mm everytime. Chamfering angle: 15°- 45°, Speed: 2800rpm, Power: 380V/50HZ/3 phase/750W. Machine condition: unchecked. Approx. Transport dimension: LxWxH 380 x 240 x 245 mm; Approx. Weight: 13kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40439-24

0.75 HP, 380 V, stroke approx. 100 mm Auction-ID: A7-39274-27

- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-38450-56

Machine type: Double-end tenoner / Profiling and squaring machine Manufacturer / Brand: STEMAC Macchine Lavorazione del Legno (Italy) Model / Type: SSQ/1-2500 Year of manufacture: 1991 Serial No.: S90005 Working width: up to 2500 mm Workpiece thickness: 10–60 mm Feed speed: 6–30 m/min (adjustable) Number of working units: 2 main heads (each side) + scoring / trimming units Spindle diameter: 40 mm Max. tool diameter: 250 mm Voltage / Frequency: 380 V / 50 Hz Total installed power: 85 kW Air pressure: 6 bar Control system: Pneumatic and electronic control with central panel Drive system: Chain feed system with variable speed motors Dust extraction outlets: 4 × Ø 150 mm Remarks / additional equipment: STEMAC SSQ/1-2500 industrial double-end tenoner equipped with heavy-duty feed chains, profiling heads, and pneumatic clamping system. Designed for precise tenoning, profiling, and  ...

• Dovetail machine Serial number 103502 Total installed power 2 KW Maximum workpiece width approx, 250 mm Milling template with 10 notches in each zone Distance between the notches approx, 25 mm Motor power 1,50 KW 8 milling spindles 2 pneumatic clamps • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 900 x 1200 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-38450-157

1800 W, 4400 rpm, 220 V Auction-ID: A7-39274-12

Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40575-38

Bar length approx. 350 mm Auction-ID: A7-39274-14

It is easy, quick to change the cutter, no need to clamp, easy operate, perfect chamfering, easy adjust, and economic, suitable for batch parts of mechanism or mould. In-house developed straight line bevel edge function can make 15 °– 45° adjustment. Need no attire clamping, simplicity of operation, neat bevel edge, easy adjustment greatly enhance operation efficiency. This bevel machine is suitable for batch machine parts production, mold bevel edge. Using high-speed bevel machine is the current trend of the development of mechanical industry. Chamfering range : straight 0-3mm,curved 0-2.5mm. Power: 380V / 750W. Speed:straight 8500rpm,curved 12000rpm. Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 600 x 600 mm; Approx. Weight: 62kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-4 ...

Power 1.8 HP, 2800 rpm, blade length approx. 150 mm Auction-ID: A7-39274-22

• Spindle moulder • Serial number 1152 • Motor power 5,50 KW • Spindle diameter 50 mm • Table size 1000 x 630 mm • Working height from the floor 850 mm • Maximum tool diameter under table approx, 150 mm • Operating conditions of this machine: unchecked. • Transport dimensions approx. 1200 x 800 x 1300 mm. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-38450-143

Table surface approx. 1000 x 1000 mm, right/left barrel, 3-roller feed Holz-Her type ETX, 380 V, milling fence and extensive accessories Auction-ID: A7-39274-5

HOFFMANN PP2-H-DB-SDE-10EHorizontal/vertical milling machine with SPS control, suitable for machining light frames and curtain facades.Power: 1.7 kWAir pressure: 6 barSpeed: 25,000 rpmVoltage: 400 V – 50 HzSerial number: SO 7.186-5Condition: RefurbishedDimensions (mm): 1000 × 750 × 1600Weight (kg): 265 Auction-ID: A1-39769-4

Pneumatic tool for manual chamfering with a range up to 2-3 millimetres. Chamfering capacity C0.1-C1.5; radius R1.5. No-load rotation speed 3000 rpm, bore 0.1 - 0.9 mm, pneumatic supply 0.4 m³/min, operating pressure 0.6 - 0.8 mpa. Item weight 0.44 kg. Machine condition: unchecked. Approx. Transport dimension: LxWxH 155 x 100 x 60 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40439-38

Bench linear chamfering machine for angles from 15° to 45°. Height 0-3 mm, power 550 W, 2800 rpm. Item size 535 x 385 x 300 mm, item weight 38 kg Machine condition: unchecked. Approx. Transport dimension: LxWxH 450 x 550 x 300 mm; Approx. Weight: 38kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-40575-61

It is easy, quick to change the cutter, no need to clamp, easy operate, perfect chamfering, easy adjust, and economic, suitable for batch parts of mechanism or mould. In-house developed straight line bevel edge function can make 15 °– 45° adjustment. Need no attire clamping, simplicity of operation, neat bevel edge, easy adjustment greatly enhance operation efficiency. This bevel machine is suitable for batch machine parts production, mold bevel edge. Using high-speed bevel machine is the current trend of the development of mechanical industry. Chamfering range : straight 0-3mm,curved 0-2.5mm. Power: 380V / 750W. Speed:straight 8500rpm,curved 12000rpm. Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 600 x 600 mm; Approx. Weight: 62kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-4 ...

• Hand-operated dovetailer, dovetailing machine • Serial number 010361 • Total installed power 0,75 KW • Max, Workpiece width approx, 420 mm • Workpiece length from 200 mm up to 1500 mm • Drawer front thickness from 7 mm up to 60 mm • Drawer side thickness from 7 mm up to 30 mm • 4 possible distance between notches: 25 - 40 - 50 - 80 mm • Milling motor working vertically from bellow • Motor power 0,75 KW, rotating speed 16500 rpm • 2 horizontal pneumatic clamps and 2 vertical ones • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-38450-110

Maximum tool diameter under the table approx. 250 mm With MAGIK/34 3-roller feeder Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-38450-217

Vertical head stroke 180 mm Head longitudinal stroke 200 mm Head cross stroke 80 mm Head rotation +/- 45° 2.20 KW Motor Tilting table +/- 45° Operating conditions of this machine: unchecked. Dimensions for transport approx. 1200 x 900 x 2250 mm. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-38450-64

FESTO Spigot Cutting and Slitting Machine ZA Characteristics: • FESTO machine from the renowned manufacturer G. Stoll (Esslingen) • Robust design with casting table and hand guide • Saw blade holder and adjustable milling spindles • Including approx. 30 milling tools (various profile and slot milling cutters) • Instruction manual included in the original Condition: • Used workshop condition, • Slight traces of rust, dusty, cleaning necessary • Ideal as a workshop replacement or for restoration Auction-ID: 03Y-AWU-1

machine: SCM MULTIFLEX Angular Center Year: 1990 saw: Ø400 mm Tenon Shaft: L 320 mm, bore 50 mm Profiling Shaft: L 320 mm, bore 50 mm Glazing bead recovery shaft: Ø200 mm blade Pointing: Pneumatic Stop: revolver Grooved axle: 320 mm Max. working circle: 320 mm Spindle Profiling: 320 mm Max. working length: 2800 mm Workpiece width: min. 30 mm / max. 140 mm Splinter height: max. 115 mm Engine power: 4 PS Speeds: 3000 rpm cut-off saw, 3250 rpm slotted spindle Split spindle stroke: 265 mm Slotted spindle Ø: 50 mm Ø Grooving tools: 350 mm aspiration: Ø120 mm x2 Feed speeds: 1.5 - 16 m/min Auction-ID: A1-39805-10

3000 W, 380 V, 2990 rpm Auction-ID: A7-39274-24