machines and plants for process engineering used for sale (7,699)

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

2 PIECES HEAT EXCHANGER TYPE PLATE HEAT EXCHANGER at call Tel.01715213204

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container  ...

For sale is a pilot plant or small production plant for the production of composites (granulars) from fibrous materials, plant fibers or waste paper with clay flours. Description: A complete technological line consisting of the following machine components: 1. Two tall silos for storage 1,000.00 € 2. Twin shaft mixer 500,00 € 3. Shredder with upstream magnetic drum for the selection of magnetic metals – 20.000,00 € 4. Collagen press type Kahl 18.000,00 € 5. 2 conveyor belts for transfer to the mixing drum € 1,000.00 6. Kitzmann Mixing Drum 25.000,00 € 7. Conveyor belt – €500.00 8. Floor dryer including heating system € 12,000.00 9. Product discontinuation with cyclones 2,500.00 € 10. Electrical distribution and control cabinets 5.000,00 € Original new price of the entire system 465,000.00 € Recommended retail price Total price net 85.500,00 €  ...

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Filter Manufacturer: Sartorius Type: SM 38001

Filter Manufacturer: Hunter Type: ZVA 01 ABTE

Crossflow filter Manufacturer: Sartorius Type SM 17521

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...

Comprimo B.V. / Shell Diisopropanolamin (DIPA) Regeneration (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Regeneration of DIPA and stripping of H2S for further processing in the Claus Units. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput DIPA Regeneration max. 1112 t/d (DIPA with 2,79m% H2S load) Operational operating temperature = 102 to 106°C (max. 160°C) Operational operating pressure = 0,5 to 0,8 bar (max. 6,0 bar) 2015 – Complete CUI Program on main column (new coating and insulation) 2022 – Decommissioning

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Edeleanu GmbH / Shell Fuel Gas Treater (HG Treater) (1978) Year: 1978 Make: Edeleanu GmbH / Shell Treatment of process gases (removal of H2S) by Diisopropanolamine (DIPA) washing. Year of manufacture 1978 Process Design by Shell Process Engineering by Edeleanu GmbH Throughput max. 180 t/d (DIPA-circulation max. 260 t/d) Operational operating temperature = 30 to 50°C (max. = 120°C) Operational operating pressure = 4,0 to 5,0 bar (max. = 12,5 bar) 2022 – Decommissioning

Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning

Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...

Sour Water Strippers (SWS-1 and SWS-2) (1981) Year: 1981 Two redundant units for removal/reduction of H2S and ammonium (NH3) from plant wastewater by using stripping steam. Year of manufacture 1981 Process Design by Shell Process Engineering by Comprimo B.V. Throughout for each SWS max. 1289 t/d (incl. 1,58 t/d NH3 and 2,82 t/d H2S) Operational operating temperature SWS-1 = 102°C, SWS-2 = 95°C Operational operating pressure SWS-1 = 0,1 bar, SWS-2 = 3,3 bar 2022 – Decommissioning

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Squeeze kneader Volume : 1500 ltr. Material : Areas in contact with the product in stainless steel Drive paddle : 90 KW Screw drive : 45 KW

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

1 horizontal cooling water stacking tank, insulated with black plastic mats Contains 41.000 l Manufacturer Behälterbau Bremen, Fabr. Item No. 223/216-L with various centrifugal pumps, all controlled by frequency converters. with complete piping with control cabinet system was used for cooling water production for PET bottle blow molding machines. The entire system is in perfect condition, not dismantled.

1 cooling tower system, manufacturer Karlsruhe with 1 fan, type KD2/18-34-3 Engine BG 180C 220 kW with 1,460 rpm Brik No. 8222, power 1200 kW stands on the roof, not dismantled with steel frame and stand frame rust removal Withdrawn from production at the end of 2023

Laboratory mixer Papenmeier, 3l and 10l pot available

Machines No 53423, 5.5KW incl. soundproof booth

1 large evaporative condenser plant, manufacturer Thermofin GmbH Prod. No. 703543-010-001; Type: TACD=90-1-29-N B%. Year of manufacture 2008 permissible Operating pressure 21 bar Curb weight 4,500 kg with frame and walk-through platform all around standing on the roof, with frame for sale In very good maintained condition, immediately available

2 identical evaporative condensers with 6 fans each with frame standing on a roof Year of manufacture 2002, in the best maintained condition is written as parked on the frame