machines and plants for process engineering used for sale (7,696)

Edeleanu GmbH / Shell 3. Sulphur Recovery (Claus-1) Year: 1956 Make: Edeleanu GmbH / Shell Conversion of the hydrogen sulfide produced in the 3 DIPA regenerators into elemental sulfur. (H2S recovery efficiency = 95.4%) Year of manufacture 1956 (1996 new furnace) Process Design by Shell, Claus Process Process Engineering by Edeleanu GmbH Operational operating throughput = 6 to 36 t/d H2S Operational operating temperature = 250 to 340°C Operational operating pressure = 0,3 bar 2022 – Decommissioning

Year: 1965 Make: SHELL / BADGER N.V. Crude Oil Atmospheric and Vacuum Distillation and Naphtha Stabilizer. Year of manufacture 1965 Process Design by Shell Process Engineering by BADGER N.V. Feed = Original design, paraffinic crude (21 d/month), naphthenic crude (7 d/month), after 2015 Revamp is 100% naphthenic crudes. Crude oil with Total Acid Number (TAN) up to 4,2 (TJP), 3,3 (Laguna), (range of Viscosity = 5,5 – 144 cst/100°C) Throughput max. 12.000 t/d – original design Current Process Parameters (after 2015 Revamp) Atmospheric Distillation: Throughput max. 6000 t/d Operational operating temperature = 355°C Operational operating pressure = 2,5 bar Vacuum Distillation: Throughput = max. 4500 t/d Operational operating temperature = 380°C Operational operating pressure = 0,2 bara Naphtha Stabilizer C-0807: Throughput = max. 2000 t/d Operational operating temp ...

Sour Water Strippers (SWS-1 and SWS-2) (1981) Year: 1981 Two redundant units for removal/reduction of H2S and ammonium (NH3) from plant wastewater by using stripping steam. Year of manufacture 1981 Process Design by Shell Process Engineering by Comprimo B.V. Throughout for each SWS max. 1289 t/d (incl. 1,58 t/d NH3 and 2,82 t/d H2S) Operational operating temperature SWS-1 = 102°C, SWS-2 = 95°C Operational operating pressure SWS-1 = 0,1 bar, SWS-2 = 3,3 bar 2022 – Decommissioning

36,000 m3 thermal oil supply system/exhaust air purification plant (special plant construction) WK, Year of construction: 2012, with heat recovery and cooling supply, The system is currently designed for two printing systems. Depending on the Machine equipment for 3 - 4 printing systems. The system consists of the following components: - 1 roof-mounted thermal post-combustion system / exhaust air purification WK Thermal Engineering Plant, boiler and apparatus construction WKTNV, year of construction: 2012, exhaust air volume at the inlet 36,000 m³/h, maximum permissible combustion chamber temperature max. 730 °C, burner type WK/H1 gas cone, Burner power 6,600 kW, fan power 200 kW, maximum permissible inlet temperature 210 °C, Maximum permissible solvent throughput 500 kg/h, natural gas heating medium, calorific value of the heating medium 32693 kJ/m³, max. heating fuel con ...

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Squeeze kneader Volume : 1500 ltr. Material : Areas in contact with the product in stainless steel Drive paddle : 90 KW Screw drive : 45 KW

Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

1 horizontal cooling water stacking tank, insulated with black plastic mats Contains 41.000 l Manufacturer Behälterbau Bremen, Fabr. Item No. 223/216-L with various centrifugal pumps, all controlled by frequency converters. with complete piping with control cabinet system was used for cooling water production for PET bottle blow molding machines. The entire system is in perfect condition, not dismantled.

1 cooling tower system, manufacturer Karlsruhe with 1 fan, type KD2/18-34-3 Engine BG 180C 220 kW with 1,460 rpm Brik No. 8222, power 1200 kW stands on the roof, not dismantled with steel frame and stand frame rust removal Withdrawn from production at the end of 2023

Laboratory mixer Papenmeier, 3l and 10l pot available

Machines No 53423, 5.5KW incl. soundproof booth

1 large evaporative condenser plant, manufacturer Thermofin GmbH Prod. No. 703543-010-001; Type: TACD=90-1-29-N B%. Year of manufacture 2008 permissible Operating pressure 21 bar Curb weight 4,500 kg with frame and walk-through platform all around standing on the roof, with frame for sale In very good maintained condition, immediately available

2 identical evaporative condensers with 6 fans each with frame standing on a roof Year of manufacture 2002, in the best maintained condition is written as parked on the frame

Subject to prior sale - errors possible! Internal reference number: M-1190

Subject to prior sale - errors possible! Internal reference number: M-1189

Subject to prior sale - errors possible! Internal reference number: M-1188

Sludge filter system in sea containers Specifications: - Sludge filter press JUNGHANS with cylinder unit + conveyor belt - Flocculation plant -Pump - Control cabinet with electrical equipment - Aluminium water drip tray in the entire container floor -Lighting - Sea container 4 doors - Space requirement approx. W 6.0 x H 2.4 x D 2.4 m - Weight approx. 5000 kg - Separate conveyor belt L 8.0 m

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

Herbold Fine Mill PU 500 Suitable for fine grinding of plastics and soft to medium-hard materials Drive power 55 kw Grinding disc diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Dissolver Agitator Geppert Mixing Technology SV 30 Power 0.55 kW Speed range 350-1500 1/min Switchboard with integrated FU mobile, mobile on castors Very good condition, straight from production

Dissolver Pendraulik Disperlux TD 200 EX protected design Power 1.5 kW Speed range 930-8400 1/min Very good ready-to-use condition, straight from production

Main voltage: 400V, 50Hz Air pressure: 5-6 bar

Powder disperser Manufacturer: Pierre Guérin Type: F2116 Machine No.: 9914350 Year of Manufacturing: 1989 Power: 2.2 kW very good condition with hopper (diameter: 610 mm; height: 500 mm) on a mobile stainless steel frame with control panel with power plug LWH: 1000 x 550 x 1410 mm

Powder disperser Manufacturer: Ytron Type: XC1/1/5.50-2 Machine No.: 03030247 very good condition with control cabinet and control system with hopper (diameter: 470 mm; height: 700 mm) on a mobile stainless steel frame LBH: 1050 x 500 x 1600 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S Machine No.: 200731001 Power: 5.5 kW very good condition Mixing tool as good as new mounted on stainless steel frame LBH: 1050 x 600 x 560 mm

Inline homogenizer Manufacturer: Ystral Type: Z 5.500 S/W3DGA-124P Machine No.: 208490703 Year of Manufacturing: 2003 Power: 5.5 kW very good condition mixing tools as good as new mounted on stainless steel frame LWH: 1050 x 600 x 560 mm

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Granulator for high loading (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw