machines and plants for process engineering used for sale (7,696)

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Dissolver IKA Ultra Turrax T 65 S 5 Power 1.6 kW Speed 3600 1/min, 7200 1/min IKA Dispersing Tool S 65 with tub and container lid mobile, mobile on castors Very good ready-to-use condition, straight from production

Disc mill with 2 counter-rotating shafts, in stainless steel, for herbs and similar products

Pelletizing Mixing Conditioner Pellet Mill Amandus Kahl Diameter 400 mm, length 2500 mm, stainless steel, as good as new

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

A refurbished Aerzen screw compressor type: VM 410 - 2 is offered. All bearings and sealing elements have been renewed. This is the compressor stage.

Machine name: Passavant 1500 Manufacturer: Passavant Type: 1500 Year of Make: 1977 Design: Bridge spar press Filter pressure: 15 bar Press capacity: 3,000 liters Expiration:Closed Filter area: 215 m2 Plate format: 1500 x1500 mm Number of plates: 60 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloths: No Filter Cloth Washer: Yes Panel package length: 4,400 mm Cake thickness: 30 mm Closing pressure: approx. 400 bar Dimensions: L 8,300 x W 1,950 (2,400) x H 2,930 (700) mm Accessories: A hydraulic system, a light barrier, a filter cloth washer Condition: Used Price: On request

Throughput Steel & VA 700 kg/h Brass 400 kg/h Grey cast iron 1000 kg/h Aluminium 280 kg/h Drive power 3 kW Drum diameter 400 mm max. load 30 kg throughput depends on the shape of the chip and the material and is therefore swaying

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

2 PIECES HEAT EXCHANGER TYPE PLATE HEAT EXCHANGER at call Tel.01715213204

Gas Chromatograph Agilent Technologies 7890A GC System/7683 D Injector Manufacturer: Agilent Technologies Model: 7890A GC System/7683 D Injector Complete List of equipment available on request.

Multi Range Viscometer Herzog PAC HVM472 Manufacturer: Herzog PAC Model: HVM472 SN: 10720574 power rating 1,300 W, with 2 capillaries Complete List of equipment available on request.

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container  ...

For sale is a pilot plant or small production plant for the production of composites (granulars) from fibrous materials, plant fibers or waste paper with clay flours. Description: A complete technological line consisting of the following machine components: 1. Two tall silos for storage 1,000.00 € 2. Twin shaft mixer 500,00 € 3. Shredder with upstream magnetic drum for the selection of magnetic metals – 20.000,00 € 4. Collagen press type Kahl 18.000,00 € 5. 2 conveyor belts for transfer to the mixing drum € 1,000.00 6. Kitzmann Mixing Drum 25.000,00 € 7. Conveyor belt – €500.00 8. Floor dryer including heating system € 12,000.00 9. Product discontinuation with cyclones 2,500.00 € 10. Electrical distribution and control cabinets 5.000,00 € Original new price of the entire system 465,000.00 € Recommended retail price Total price net 85.500,00 €  ...

Trowalizing machine Engine Type OUX 160M6 6.9 KW, 380 V, 1455 rpm, 15.2 A, 50 Hz Speed range 965 to 10455 rpm. Dimensions: H 1700 x W 1730 x D 1900 Weight: 1450 kg net

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request

Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: KD 613-G Year of Make: 1980 Degree of protection: IP 44 Speed: 455 rpm Operating voltage: 380 / 660 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 55 kW Flow rate: 266 L/min. Dimensions: L 1900 x W 1000 x H 800 mm Curb weight: Approx. 1500 kg Condition: Used Price: On request

- Type: RS 10 (Rotoscreen) - Year of construction: 2003 - Consisting of a fixed and a movable slat grille - Material: stainless steel

We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Filter Manufacturer: Sartorius Type: SM 38001

Filter Manufacturer: Hunter Type: ZVA 01 ABTE

Crossflow filter Manufacturer: Filtron Type GH 142

Crossflow filter Manufacturer: Filtron Type GH 245

Crossflow filter Manufacturer: Sartorius Type SM 17521

Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...

Comprimo B.V. / Shell Diisopropanolamin (DIPA) Regeneration (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Regeneration of DIPA and stripping of H2S for further processing in the Claus Units. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput DIPA Regeneration max. 1112 t/d (DIPA with 2,79m% H2S load) Operational operating temperature = 102 to 106°C (max. 160°C) Operational operating pressure = 0,5 to 0,8 bar (max. 6,0 bar) 2015 – Complete CUI Program on main column (new coating and insulation) 2022 – Decommissioning

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Edeleanu GmbH / Shell Fuel Gas Treater (HG Treater) (1978) Year: 1978 Make: Edeleanu GmbH / Shell Treatment of process gases (removal of H2S) by Diisopropanolamine (DIPA) washing. Year of manufacture 1978 Process Design by Shell Process Engineering by Edeleanu GmbH Throughput max. 180 t/d (DIPA-circulation max. 260 t/d) Operational operating temperature = 30 to 50°C (max. = 120°C) Operational operating pressure = 4,0 to 5,0 bar (max. = 12,5 bar) 2022 – Decommissioning