machines and plants for process engineering used for sale (7,705)

Used 4-basket autoclave WSA-8 by Spomasz. Year of manufacture 2012. Diameter 1100 mm, acid-resistant design. Diameter 1100 mm. Working pressure 0.4 MPa Calculation temperature 151°C Sterilization temperature max. 132°C Water consumption approx. 400 dm3/8h Steam consumption during the entire cycle approx. 400 kg/h Installed power 5.5 kW Length 480 mm, width 2400 mm, height 2200 mm, weight 2020 kg.

Used centrifuge made by Alfa Laval type AFPX 407 BGP-74. Hydraulic capacity - maximum 5 m3/h. 2 pieces available.

Used matrix with a capacity of 1000 litres, acid-resistant design. Mixed cream or gel masses. Blade agitator - optional propeller agitator.

Used matrix with a capacity of 300 litres, acid-resistant design. Mixed cream or gel masses. Motor power 0.4 kW. Weight 260 kg.

Used Stork Wolf model MRS-2500.

Used vacuum tumbler by Nowicki model MA-5-2000 PS. The device will be perfect for meat processing plant for massifying and tenderising meat. Model: MA - 5- 2000 PS Power: 4,1 KW Weight: 1190 kg Capacity: 2000 litres Intake: 1200 kg Bowl speed: 0 - 9 / minute Length: 2860 cm Width: 1335 cm Height: 1670 cm

Used automatic cutter-mixer-emulsifier by Karll Schnell type FD9. Without emulsifying motors.

Used stainless steel conical mixer for bulk materials type MR-05. New 2015. Capacity 3000 L Rotational speed of screw 320 rpm, Power 5,5 kW, Total weight 500 kg.

Used vibration ito Virto-Cuccolini VPB 800 1/X. Year of construction 2023. Sieve for food powders and granules. Construction: - Parts in contact with the product made of AISI 304 acid-resistant steel - Other parts made of galvanised plain steel - Cover with D200 inlet, D200 inspection and D100 vent; complete with clamping ring and silicone V-gasket - Sieve deck H=118 mm with mesh support ring, with outlet D150; Silicone gaskets - Mesh wire diameter 0.16 mm, height 2850 mm, hole 0.25 mm in AISI 304 - Mesh support ring for size 800 tensioned in AISI 304 satin finish (fin. 3). Tension rings included. - Mesh opening 0.397 MM - AISI 304 - Sieve bottom with outlet D116 - 0.73 kW, 230/400 V 50 Hz, 4-pole vibration motor - Installed on the flange spring holder and on the 3-wheel trolley made of acid-resistant steel - Control panel ON/OFF - Sieve complete with Atex components and ce ...

Used decanter made by GEA Westfalia Separator AG typ CA 450-00-19. Control cabinet. Drum rotation: 3000 rpm. The decanter worked on wastewater - sludge dewatering.

Used centrifuge made by Alfa Laval, type VNPX 310-SGV-34. 1420-1500 Rpm. The previous owner doesn't have technical documentation.

Used milk centrifuge made by Spomasz, model: LWG-47 with upper and lower fittings.

Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW

Used LOOS DF 1000 steam boiler. Technical parameters: "WEM" type water treatment module water preparation module type "WSM-T 2.0" LOOS-DAMPFFIX steam generator type "DF 100010", new: 2006 total volume 110l max pressure 13Bar max temp 195 degrees Celsius 2,000L fuel oil tanks complete steam reduction station 10bar/4bar hot water preparation station with a 400l tank copper coil water treatment system

New filtercyclone made by Bühler. New sheepskin. Fan included.

Used colloid mill made by Młynkol type KMH700. New 2005. Power - 11 kW. Rotation - 2900 rpm. Reported output 700-1000 kg/h. Weight - 185 kg.

Used Buchi vacuum evaporator model Rotavapor R-210. Year of construction 2014. Water bath: 20-95 degrees C Flask capacity: 50-4000 ml Equipped with: vacuum controller, vacuum pump, radiator, thermostat.

Used spray dryer by ProCepT. Model SD1. Year of construction 2017. Dryer made in ATEX: EX II 3G. The ProCepT SD1 spray dryer is designed for formulation and process development as well as small-scale clinical production. The device enables spray drying of samples with a capacity of 0.5 ml to several liters. The equipment is used in preclinical and clinical applications with the ability to continuously process water in the range of 0.1-15 ml/min (0.01-11/h) (higher for organic solvents), with typical batch sizes from 100 mg to several kg dry product. The operator can monitor and control every critical process parameter using a computer with a touch panel. The software provides complete data recording with tracks. During the process, there is a negative pressure in the process column. The dryer uses a nitrogen recirculation system to process larger amounts of solvents. Solvents ar ...

Used rotary screener. Capacity: 500 L Cylinder dimensions: 700x1250mm. Material: stainless steel. 2 pieces available.

Used Glatt mixer for powders in bins. Type: Kontainer Mischer. Year of construction 1996. Leg spacing: 105 cm Paw length: 100 cm.

Used Kilian TX-40 AM rotary tablet press. Number of stations 40.

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

Used self-cleaning disc centrifuge by VEB type SMZA71. New 1977. Capacity 20000 L. 4800 rpm.

Used Gea Ahlborn VT 20 Locin flow pateuriser. Capacity 70 hL/h, full control panel, 16 Bar, 100 C. Lenght 330 cm, width 230 cm, weight 3000 kg. New 1991 r. CIP, equalizing tank. The largest product feeding pump according to my estimation, has a capacity of 50 000 liters / h (feed 2 ½ inch and 2-inch outlet) The pump does not have a nameplate. Its engine has an attached plate: 11-12,6 kW motor and connections that I mentioned above helped me specify the parameters of the pump. The pump is however stifled by giving large pressure and lower productivity. Supply systems for the beer and from there on to the pasteurizer have a diameter of DN40. The second pump section supports pasteurization (between the heat exchanger and a heating section in a large plate heat exchanger) is pump Fristam FP 722/145 A with an engine power of 1.5 kW. It should have a capacity of approx. 15 ...

Insulated tank-mixer with a capacity of 25,000 liters. Mixer for thick mass

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Used glass lined reactor with capacity 100 L. Manufacturer DeDietrich. Year of manufacturing 1986. Technical parameters: 1. Working pressure: - tank -1/6 - jacket -1/6 2. Working temperature: - tank -25/+250 - jacket -25/+250 3. Capacity: - 105 L tank - jacket 24 L

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...