machines and plants for process engineering used for sale (7,705)

Used plastic agglomerator, model GHX 300. New: 2021. Technical data: - Capacity 300 liters, - Recommended feed 200 liters, - Efficiency 220 kg/h (PE / PP PET / PA films), - Automatic or manual water supply, - 75 KW engine, - Installed set of six sets of fixed knives, - Rotating arm with double-sided knives, - Knife material 9 CrSi, - Pneumatic agglomerate discharge with the possibility of setting in automatic or manual mode, - Good condition / Used for only one year.

Used hermetic, self-cleaning centrifuge made by REDA, model: RE150T, capacity: 15.000 liters / hour, new: 1998 Centrifuge serviced. Last service on February 16, 2022.

Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 314. Capacity: 15.000 liters / hour.

Used, copper coating pan made by Spomasz Pleszew, model: CBA-2. Capacity: 100 liters, load: approx. 60 kg.

Used copper coating pan manufactured by Spomasz Pleszew with a tilting drum. Capacity: 100 liters, input: about 60 kg. After general renovation.

Used stainless steel egalizer, capacity: 1500 liters.

Used stainles steel mixer with dispersing agitator, capacity: 3000 liters.

Used stationary dissolver made by Teja, type: DDZ-90-7.5/2000, capacity: 2000 liters. Dissolver equipped with cooling jacket, anchor mixer with scrapers and dispersing mixer. Acid-resistant execution. Motor power 90 kW.

Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...

Used vacuum-drum filter made by Padovan, type Taylo 10. Filtration area 10 m2.

Used vacuum-drum filter made by Padovan, type: Taylo 20. New 2013. Filtration area 20 m2.

Stock# U2458-1 Used vertical stainless steel 1.4571 (AISI 316Ti) mixing tank by Heidelmeier (DE) with total volume 9000 l. Working volume up to 6000 l. Tank has internal diameter 2470 mm x length of the straight wall 1700 mm. Top flat, with bolted cover. There is an inspection manway with manually rised cover. Bottom welded, conical with central discharge. Tank is equipped with side wall agitator, type "jet stream" by Ystral type TFW-4. Driven directly by el motor 11 kW, 1475 rpm, 400/690 V, 50 Hz. Tank is mounted on 4 stainless steel legs. Last time used in chemical production.

Stock# U2456-2 Used two shaft dissolver by Vollrath (DE) model VDDX 15. Machine has two shafts, each with length 69 cm. Centers of the shafts are in distance 165 mm. One shaft has mounted two toothed discs, each with diameter 170 mm - distance between discs - 5 cm. Second shaft has one toothed disc with diameter 170 mm. Shafts are belt driven by el motor 10 kW, 1465 rpm, 380 V, 50 Hz Ex proof design (EExeIIte). Working rotation of shafts adjustable mechanically up to 3000 rpm. Dissolver has also baffle/scrapper agitator, with manually adjustable position. Top rised mechanically, driven by gearbox and el motor 0.55 kW. Mixer is equipped with stainless steel mixing pan with diameter 600 mm x length of straight side of wall 470 mm. Total volume about 130 l, working - 100 l. Discharge outlet on the side wall, equipped with manually operated valve. Mixing pan is mounted on carbon steel mo ...

The VTA VK100-10 vacuum distillation system is an advanced device designed for effective separation of substances under reduced pressure conditions. It is particularly useful in processes requiring gentle treatment of materials sensitive to high temperatures. Key features of the VTA VK100-10 system: • Efficiency: The ability to process large quantities of material, making it suitable for industrial applications. • Precise parameter control: The advanced control system allows for precise monitoring and regulation of temperature and pressure, ensuring optimal conditions for the distillation process. • Safety: Equipped with advanced security systems, it protects against potential hazards associated with working in a vacuum. • Versatility: The ability to adjust operating parameters to different types of materials, making the system universal in industrial applications. Th ...

Used pressure tank made by Urlinski, type: ZB 50 PF. New 2020. Working capacity: 50 liters Intended use: The ZB 50 PF-type mobile tank, vacuum-tight, designed for hygienic storage and transportation of pharmaceutical and cosmetic products of the second group of liquid classification (safe liquids). Technical data: -TYPE: ZB 50 PF -Working tank capacity: 50 liters, -Total tank capacity: 70 liters, -Grade of steel in contact with the product: 1.4404, -Tank inner diameter: 400 mm, -Fastener sealing material: VMQ, -Capacity: 56 kg, -Height: +/- 1300 mm, -Height with lid open: +/- 1420 mm, -Length: +/- 610 mm, -Length with open lid: +/- 940 mm, -Width: +/- 530 mm, -Drain spigot height from the ground: +/- 300 mm, -Surface area in contact with the product: 0.84 m2.

Used ball mill by TECHMASZ, model 150 L. New: 2016. Ball Mill is a device for the production of food like: creams, toppings, chocolate, fillings, pastes in the whole range of flavors and color palette with a fineness of 50-15 microns. Grinding is carried out with steel balls and an appropriately sized bottom. The mill is equipped with a bottom drain of the mass, which gives the possibility of washing with water and changing from dark mass to white or colored mass. Thanks to this technical solution, the plant is not limited by the production of one type of mass. The minimum charge of the Mill is 50Kg. The mill has the possibility of cooling by connecting cold running water or water from the cooling water unit (closed circuit), which allows precise temperature control. Mill after overhaul (drives, power supply, cleaning(whole + control cabinet).

Used Ruehle tumbler. Model MKR 600. Last service in 2021. RUEHLE MKR600 The RUEHLE drum tumbler-mixer combines many technical functionalities in the field of plasticizing technology. It is used, among others, in: - massaging - mixing - pickling - dry salting The RUEHLE tumbler model MRK600 is equipped with a highly efficient cooling unit and a very high-performance vacuum pump. In the computer software, we can determine the degree of product cooling. The band available to the user ranges from -15 ° C to + 15 ° C. The mass input determines the vacuum level, which can be changed at any time. The possibilities of plastic processing are just one of the advantages of the machine. It has also been equipped with a mixing function - thanks to which the raw material processing time is shortened to 10 minutes. Despite the typical massaging or mixing functions, the device  ...

Used screw press made by Italian company Bertuzzi. New 2002. Press application: Citrus juice from the extractors can be pulped to meet customers' pulp content requirements. Helicoidal depulpers model ESM and Super have been designed specifically for refining citrus juice. They take the high-pulp juice from the extractors and gradually squeeze the pulp, producing a low-pulp juice.

Used tablet press Manesty, model B3A. 16 stations, capacity up to 700 tablets/min., pressure 6 tons, 1.5 kW motor.

Manesty B3A tablet press. Condition - used machine. Technical parameters: 16 stations, pressure 6 tons. 1500 W motor. User manual available.

Used 2-stage evaporation station UNIPEKTIN. Year of manufacturing: 1997. Equipped in aroma trap Parameters for apple juice: Input quantity: 4212 kg / h / 2840 kg / h Input dry pulp: 12 / 17.8% Temp. entrance: 15/45 degrees C. Water evaporation: 3500 kg / h Output quantity: 2,840 / 712 kg / h Temperature output: 50/55/25 degrees C. Initial dry mass: 17.8 / 71% Aroma (15x): 26.8 l / h Temp. aroma: 7 degrees C. Fresh water consumption: 5 m3 / hour Steam consumption: 1450 kg / h

Used chamber filter press Year of production: 1971 Maximum filtration pressure - 8 bar Maximum filtration temperature - 100 OC Max. Clamping pressure - 280/300 bar Capacity - 1m3 Filtration area - 70 m2 Number of plates - 44 pcs Plate material - Polypropylene (PP) Central feed to the filter press. The set does not include a feed pump. The press has a separate panel for turning the filter press on and off.

Used 500 l capacity stainless steel mixer. Two agitators: - slow rotary (frame) 30 rpm Mixer speed adjustable as required. - fast-rotating (propeller) 1380 rpm. Installation and control for circulating pump.

Used cutter manufactured by Nowicki model KS B110 type 276 MM. New 2008. Zinastalled power 18.5 kW. Power supply 3x400V/50Hz. Max current 45A. Weight 500kg. Material - stainless steel.

Used evaporating machine for milk and caramel masses by Spomasz Pleszew type DUO CAA-9. After a complete overhaul in 2018, it meets all the parameters as DUO CAA-18. Technical data: - working capacity of one boiler: 50 dm3, V = 0.050m3 - total capacity of one boiler: 70 dm3, V = 0.070m3 - heated steam at a pressure of: 8 Bar - steam capacity: 274 kg / h - power demand: 4.1 kW - upper agitator: 74 rpm - efficiency of the milk mass: 220 kg / h, water caramel: 180 kg / h - a used motor-reducer from the Italian company Bonfigioli - inner coat made of acid resistant steel - external coat made of stainless steel - insulation shell made of acid-proof steel, tightly welded

Used mixer MK300

Used Alfa Laval Clara 20 HF - LAPX404 SGP centrifuge. New: 2014 Condition: very good Complete technical documentation Worked in food standard (vegetable proteins) Worked 328 h

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer  ...

Used production line for the production of fruit - vegetable products ( jams, mousses, pastes, soups) in glass jars. Capacity 2400 jars/hour. Line composition: 1. vacuum evaporator for jam Spomasz Pleszew, 2. vacuum evaporator for jam Spomasz Pleszew, 3. equipment set for product transport and line cleaning: - Pneumatic diaphragm pump, - Centrifugal pump. 4. buffer conveyor for loading empty jars Marba Sp. z o.o. 5. metallurgical clean jar washer Marba Sp. z o.o. 6. two-piston dosing device Marba Sp. z o.o. 7. twist-off lid remover Marba Sp. z o.o. Lid capper type: Twist off Marba Sp. z o.o. 9. 9. X-RAY Mekitec Sidemeki two-lamp contamination detector, 10. plate conveyors Marba Sp. z o.o. 11. cooling tunnel, type: TC-HRW 5 including HERMIS dehumidification, 12. water cooling tower CWT 5/600 CH Technika Chłodnicza Sp. z o.o 13. jar eliminator, type: ENS, Marba  ...

Used milk centrifuge by Nagema type SMZC 1.1. New 1987. Capacity 20000 L/h.