machines and plants for process engineering used for sale (7,710)

Used 5000 liter double-ribbon mixer from American Food Equipment Company. Internal dimensions: length 2500mm x width 2000mm x depth 1000mm. Supporting structure. Acid-resistant design.

Used paddle mixer in acid-resistant design with a capacity of 1700 liters. Italian-made mixer manufactured by Zanelli. Internal dimensions of the device: diameter 1.2m, length 1.5m.

Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.

Used dissolver from Diaf. 44 kW motor. Explosion-proof design of EEXE I I and T3.

Used hammer mill from Alpine type B 500.

Used self-cleaning disc centrifuge from Westfalia type 20-03-076.

Used decanter centrifuge from Westfalia type CA 360.

Used diatomaceous earth filter from Padowan model Greenfilter type G23. Filtration area 23m2. Operating pressure 6 bar. Year of construction 2005. CE Certified.

Used diatomaceous earth filter from Diemme type FA 10. Filtration pressure 6 bar. Filtration area 10m2. Year of construction 1986. Acid-resistant design.

Used plate pressure filter from Amafilter type MV WDCD 1100/1250/20/M. Year of manufacture 1992. Operating pressure 6 bar. Max. operating temperature 120 °C. Acid-resistant AISI 304 design.

Used plate-pressure filter for diatomaceous earth from Schenk type S 20. Maximum operating temperature 100 °C. Capacity 1100 liters. Operating pressure 5 bar. Acid-resistant design. Manufacturer's documentation.

Used shredder / shredder from Moco type AZ 17E/1210. Shredder MOCO AZ 17E, shredder with slow and quiet toothed working shafts. Low vibration and minimal maintenance, compact Robust welded structure, low power consumption, Individually interchangeable cutting discs. Very good inlet behavior, even for large bodies. High degree of fineness. The material is stopped by an optional sieve inside the cutting chamber for repeated shredding until its dimensions are smaller than the sieve openings. The control of the AC gear motors is equipped with an automatic overload-dependent reverse adjustment. BANDWIDTH EXAMPLE 15 to 18 cubic meters of loose mixed waste per hour. DIMENSIONS • Cutting section 932x912mm • External dimensions 2440x1112x730mm • Weight 4600 kg. • Drive power 2×15 kW • Voltage 400V/50Hz Year of manufacture 2010.

Used vacuum mixer from Fryma type DT 1500. The mixer has an anchor mixer with Teflon scrapers, an agitator with a dispersing disc and a heating jacket. PLC control. Total capacity 1500 liters. In addition, I have a colloidal mill / homogenizer from Fryma type MZ 120.

Used belt dryer from Hans Binder Specifications: belt width 2.62m Length of belts 14m total length 25m total height 6.2m total width 2.9m 5 levels of drying belt The dryer has 2 heating zones 1- 60-110 degrees. C, 2-70-90 deg. C The tape is made of perferized stainless steel tape. has brushes for cleaning the tape apples, celery, dill, beets were dried. Year of manufacture 1997 Gas burner dryer.

Used ultrafiltration by Membraflow. Capacity 12,000 litres/h. Year of manufacture 2004. CE The filter worked on concentrates and fruit juices.

Used ultrafiltration from APV with a capacity of 8000 liters/h.

Used ultrafiltration from Apex with a capacity of 18,000 liters/h.

Used milk centrifuge made by Alfa Laval, type: 3191 with upper and lower fittings. New: 1975

Used milk centrifuge made by Alfa Laval, type: 3191. New: 1973

Used disc centrifuge made by Westfalia, type: SA 80. New: 1998. Capacity: 15.000 l/h.

Used colloid mill made by JM Series Colloid Miller. New 2008. 11kW motor.

Type MZUT- EMBF 15 C Working capacity 15 liters Minimum working capacity ~ 5 liters Total capacity ~ 26 liters Tank inner diameter 294 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, NBR, PTFE, EPDM Task Mixer Weight ~ 276 kg Height ~ 1630 mm Length ~ 1390 mm Width ~ 720 mm EMBF Emulsifier Emulsifier drive Electric motor 5.5 kW, 2890 rpm Emulsifier rotation Continuously 1500-5500 rpm Emulsifier rotation during CIP Max 4500 rpm Heating jacket heating tank (7 kW) Minimum / maximum temperature in the tank 5 / 95° C Minimum / maximum operating temperature in the tank 20 / 90° C Minimum / maximum jacket temperature 5/ 130° C Minimum / maximum operating temperature in the jacket 25/ 120°C Permissible tank pressure 0 bar Maximum jacket pressure 4 bar Electrical power supply 3x400V+N+PE, protection 50 A Power Consumption -15kW Tank Lighting L ...

Type MZUTL 15 Working capacity ~ 15 liters Total capacity ~ 26 liters Minimum working capacity of 5 liters Tank inner diameter ø 292 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, SILICONE, NBR, PTFE, EPDM Homogenizing mixer weight ~ 474 kg Height 1760 mm Height with Raised Lid ~1950mm Length 1770 mm Length with tilted cabinet 2160 mm Width ~ 780 mm Width with tilted cabinet ~ 1050 mm PTFE double-acting scrapers Anchor Agitator Drive Electric Motor 0.55 KW, 1400/88 RPM Gear ratio reducer i=15.84 Rotation of the anchor agitator Continuously 32+160 rpm Comb homogenizer HZB N Homogenizer Drive Electric Motor 7.5KW, 2885rpm Max. sound pressure level 89 dB (characteristic A) Homogenizer rotation Continuously variable 1430+6630 rpm Jacket heating ZBG heating tank (7 kW) Jacket Cooling HE Heat Exchanger Minimum / maximum temperature in the t ...

Used 5-stage evaporation station made by Unipektin. Technical data: - Year of manufacture: 1986 - 5-stage evaporator with aroma trap - Input: raw juice: 22730 l/h - Input: filtered juice: 12810 l/h - Output: juice after the first cycle: 13825 l/h - Output: concentrated juice 70 Bx: 3745 kg/h - Heating steam requirement: 5450 kg/h - Electricity requirement: approximately 150 kW (without refrigeration units) - Water requirement: 10 m3/h - Aroma yield (150 times) 150 l/h - Aroma outlet temperature: 7 degrees C - Condensation efficiency: 9,200,000 kJ/h

Used Flottweg B-800 double-belt press. Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linear pressure rollers  ...

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

Used decanter centrifuge manufactured made by Spomasz Wronki type AWP 40-3.6. New: 1985 / 2000. Gear ratio: 159. Maximum gear load torque: 4,900 N·m. Max. drum speed 2900 rpm. Weight 3200 kg. 2 pieces available.

Used paddle mixer made by Steiner, model: MB 2000 with heating jacket. Usable capacity 2000 L. The Steiner MB 2000 with a usable capacity of 2000 litres is a professional device that can be useful for various applications in the food, chemical, cosmetic and pharmaceutical industries. It is equipped with a weighing system, a heating jacket and a paddle mixer with built-in Teflon scrapers, which enable accurate collection of the product from the bottom of the tank and prevent burning. The device can be helpful in a wide range of production processes, such as mixing, heating, defrosting or melting ingredients. By using cold water in the jacket instead of hot water or steam, it can also be used to cool products. Both the tank and the shaft with agitators are made of 304 acid-resistant steel. Teflon scrapers at the ends of the very sturdy agitators effectively collect the product f ...

Used double shaft paddle mixer made by Nowicki. Total capacity: 3500 liters. Stainless steel. Dimensions: 3600 mm x 1300 mm x 1700 mm.

Stock# U2475 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel.