injection moulding machines used for sale (791)

A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible.

Specification Injection Molding Machine Demag Systec 210/580-840 (Servo) General data Clamping force: 210 t Year of Make: 2019 Control: NC5 / MC5 Clamping unit Size of the clamping plates: 860 x 860 mm Lights spar spacing: 580 x 580 mm Opening travel: 790 mm Ejector travel: 180 mm Injection unit Screw diameter: 60 mm Injection volume: 636 cc Injection weight in hp: 579 g Spec. Spray pressure: 1352 bar L/D Screw Ratio: 20 Facilities Pump drive power: 26.0 kW Servo motor drive Bimetal, wear-resistant screw Flexible clamping unit with multiple ejector and core movements Ejector with position control Injection with control pump (p+v-controlled, closed loop) Pressure return system (RSP), 3-part Reinforced oil cooling system (supply up to 35 °C) Location: Aachen, Germany

Specification Injection Molding Machine Ferromatik Milacron Magna T150 General data Clamping force: 150 t Year of Make: 2016 Clamping unit Clearance spar spacing: 510 x 510 mm Max. plate spacing: 950 mm Injection unit: 630 Screw diameter: 45 mm Location: Aachen, Germany

Specification Injection Molding Machine Ferromatik (Milacron) Magna T Servo 110-450 General data Clamping force: 110 t Year of Make: 2017 Drive: Servo Clamping unit Lights spar spacing: 435 x 435 mm Tool installation height: min. 150 / max. 480 mm Opening travel: 350 mm Max. plate spacing: 830 mm Injection unit: 450 Screw diameter: 40 mm Location: Aachen, Germany

Specification Injection Moulding Machine Demag Extra 35-80 General data Clamping force: 35 t Year of Make: 2007 Control: NC4 / MC4 Clamping unit Size of the clamping plates: 390 x 390 mm Lights spar spacing: 280 x 280 mm Ejector force: 26 kN Ejector travel: 100 mm Injection unit Screw diameter: 22 mm Spec. Spray pressure: 2061 bar Spray volume: 42 cc Injection weight in hp: 37 g L/D Screw Ratio: 20 Machine weight: approx. 2,200 kg Equipment: hydraulic core pull, pneumatic valve Location: Aachen, Germany

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating h ...

This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This Krauss Maffei KM800-5700 MC features a clamping force of 8000 kN and an injection unit size of 5700. It has a maximum mould height of 1,100 mm and an opening stroke of 1,400 mm. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei KM800-5700 MC machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12 color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details.

Injection moulding machine Demag 1000 to BJ 2019

Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.

Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Key data: 4200 kN, 527 g/PS, 70 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit

A hydraulic Battenfeld plastic injection molding machine is offered. Clamping force: 1000kN, screw diameter: 40mm, shot weight: approx. 183g, mold mounting platens X/Y: 700mm/700mm, shot volume: 201cm³, max. injection pressure: 1968bar, max. screw speed: 290rpm, nozzle contact force: 79.2kN, machine cycles: approx. 1985087, operating hours: approx. 53578h, control system: Battenfeld UNILOG 4000. Dimensions: approx. 5440mm/1550mm/2300mm, weight: approx. 5060kg. Motor, pump and inverter renewed in December 2009. An on-site inspection is possible.

Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details.

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details.

Injection moulding machine Battenfeld BK T 2500 BJ 1991

Key data: 500 kN

Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

Key data: 250 mm, 21 , 18

Screw diameter: 18 or 25 mmStroke volume: 23 / 44 cm³Injection weight in polystyrene: 21 / 40 g/hpInjection pressure: 2,500 / 1,550 barClamping force: 25 t270 x 270 mmTool installation height min.: 200 mmOpening distance: 300 mmCONTROL: SelogicaScreen text: german / english Instruction manual: german / german Euromap 67 Pump drive power: 7.5 kWTotal weight: 2,500 kgDimensions L x W x H: 3.0 x 1.3 x 1.9 m Payment terms: 100 % before taking over the machine, net only

Key data: 1000 mm, 184 , 40

Screw diameter: 40 mmDisplacement: 201 cm³Injection weight in polystyrene: 184 g/hpInjection pressure: 2,000 barClamping force: 100 t470 x 470 mmTool installation height min.: 350 mmOpening distance: 350 mmCONTROL: SelogicaScreen text: german / german Instruction manual: german / german Multilift H Core pulls: 2xPump drive power: 22 kWTotal connected load: 36.0 kWTotal weight: 5,400 kgMachine dimensions L x W x H: 4.5 x 1.6 x 2.1 m m m Paymentterms: 100 % before taking over the machine, net only