injection moulding machines used for sale (1,087)

R1304Injection moulding machine ARBURG 270-350-90 Multronica thermoset the previous owner sold the Multronica controller for 2,500€ I wanted to convert the machine to thermoplastic. I also found a Multronica controller. There are the following options ---------------------------------------------------------------------- ----------- without control, without funnel, without thermoset device as Spare parts carrier (engine, pump, valves, cylinders, electrics, etc.) €800,-- ---------------------------------------------------------------------- ------------------- with thermoset module + replacement Multronica for assembly €1000.-- ---------------------------------------------------------------------- --------------------- with additional thermoplastic module €1200.-- ---------------------------------------------------------------------- --------------------- all prices +VA ...

Key data: 850 kN, 40 mm

R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

Price 4.900+VAT (claimable)free loading on truck Injection molding machine Locking force 200t Distance between the spars 520 x 520mm Screws D.=50mm = Injection weight in hp 297gr. Machine very well preserved comes from medical equipment manufacturer Dissolution of injection molding department .with operating instructions and 2 discs. Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

R1317 Injection moulding machine ARBURG A 221 - 250 - 55 Year of manufacture 1997 Control Multronica with handling device without hopper and water distributor converted to CF drive but without card, with operating instructions for Arburg and one for the robot Machine was freed up by the purchase of new machines. but no function check from us Price free loaded on truck € 1950.-- +VAT a viewing is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any guarantee for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

Injection molding machine Krauss Maffei KM 650-4300 CX BJ 2010

Injection molding machine Krauss Maffei KM 800-4300 MX BJ 2006

A two-component injection moulding machine Engel with piggyback configuration, including Engel Viper 40 robot and safety enclosure, is available. Clamping force: 1800kN, nozzle diameter: 35mm, min. mould installation height: 270mm, max. platen distance: 1020mm, tie bar spacing: 980mm, centering: 180mm. Screw diameter 1/2: 22mm/15mm, injection pressure 1/2: 2392bar/2203bar, injection weight 1/2: 66g/19.5g. Robot year of manufacture: 2014, robot travel X/Y/Z: 700mm/1300mm/2360mm. Machine dimensions X/Y: approx. 6700mm/2100mm, control: CC400, operating hours: approx. 38567h. The 22mm screw needs to be replaced. Without conveyor belt. Documentation available. An on-site inspection is possible.

Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

Injection moulding machine Arburg Allrounder 470 H 1000-170 BJ 2010 Clamping force 1000 kN Screw diameter 30mm Screw length 930 mm Shot weight 77g With Arburg robots

Ref. no.: 18586Hersteller: KRAUSS MAFFEIYear of construction: 2011Clamping unitClamping force: 180 tonOpening stroke: 450 mmDistance between tie bars: 560 x 510 mmMould height min.: 200 mmMould height max.: 600 mmOpening width: 1050 mmPlaten size (h x v): 790 x 740 mmInjection unitScrew diameter: 50 mmInjection volume: 393 cm³Shot weight: 357 gInjection pressure: 1892 barMeasurements and weightDimensions: 6,10 x 1,90 x 2,10 mMachine weight: 8400 kgRobotProducer: Krauss Maffei Type: LRX-100 Year: 2012

Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Injection moulding machine Arburg 470C 1600/625 Bj 1995

Injection moulding machine Arburg 320C 600/250 BJ 2002

Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001

Injection moulding machine Netstal synergy 600/110 BJ 2001

3 x Injection moulding machines Arburg 420C 1000-250 BJ 1994/1995/1996

Injection moulding machine Arburg 570C 2000/150 60 2 K BJ 2007

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Key data: 800 kN

Arburg 370 C (YOC: 05/2000) Weight: 3,180 kg 800 KN clamping force 35 cylinder

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998