injection moulding machines used for sale (791)

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Key data: 14000 kN

Machine + Robot

Key data: 27000 kN, 190 mm

incl. Viper Robot 90

Key data: 24000 kN, 150 mm

machine+robot

This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Key data: 6500 kN, 105 mm

Location is : Latino America !

Key data: 20000 kN

Angebot/Offer: Engel Duo 17060/2000 Viper Robot 60 approx. 4900h YOC 2021

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Key data: 4200 kN

Machine in production !1

Engel injection moulding machine old

machine in stock!

with spare screw, high-pressure hose and various spare parts - see pictures

various spare parts incl.

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA900ІІ features a clamping force of 900 kN and a mold opening stroke of 320 mm. It has a screw diameter of 36 mm and a theoretical shot volume of 153 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA900ІІ machine we have for sale. Contact us for further details.

SACMI rotary compression molding machine. Equiped with 64 cavities and mold for 37mm caps.

SACMI complete compression molding system with mold PCO1881. Includes rotary compression molding press CCM32MB with 32 stations, PMV224E lining machine with CVS053D inspection system.

For sale rotary compression machine CCM032, produced in SACMI (Italy). Perfect condition with control video system.

SACMI rotary compression line for plastic caps 38 mm. with control video system.

SACMI line for one and for two component caps, with control video system.

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details.

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details.