injection moulding machines used for sale (791)

Key data: 900 kN, 30 mm

Stock No.: 503672 Manufacturer: Battenfeld Type: HM 90-210 Control: UNILOG B6 Year of Make: 2013 Hours: 30533 h Clamping force: 900 kN Tie bar h x v: 420 x 370 mm Panel size h x v: 580 x 630 mm Min. installation height: 450 mm Plate spacing max.: 925 mm Opening travel: 475 mm Screw diameter: 30 mm Displacement: 106 cc Spray pressure: 2042 bar Machine dimensions LxWxH: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text German CEE socket 16A CEE socket 32A Core pull hydraulic 2x Air valve 1x Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Worm drive with three-phase servo motor Ethernet interface Interface EUROMAP 13 EUROMAP 67 Handling Interface Interface for coloring device Interface for temperature control unit Schuko socket 10A Tool heater 8x

Key data: 900 kN, 42 mm

Stock No.: 503452 Manufacturer: BOY Type: 90 E Control: Procan ALPHA Year of Make: 2012 Hours: 49130 h Clamping force: 900 kN Tie bar h x v: 430 x 360 mm Panel size h x v: 635 x 610 mm Min. installation height: 250 mm Plate spacing max.: 725 mm Opening travel: 475 mm Screw diameter: 42 mm Capacity: 214.7 cc Spray pressure: 1724 bar Machine dimensions LxWxH: 4.37m x 1.21m x 2.2m Total Weight: 3730KG

Key data: 800 kN, 35 mm

Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2019 Operating hours: 9000 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2429 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Interface BDE Interface for coloring device Schuko socket 10A Low-wear plasticizing unit Machine dimensions LxWxH: 4.4m x 1.7m x 2m Total Weight: 3900KG

Key data: 800 kN, 35 mm

Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 EX Control: MC5 Year of Make: 2008 Hours: 49673 h Clamping force: 800 kN Tie bar h x v: 520 x 420 mm Plate size h x v: 640 x 740 mm Min. installation height: 300 mm Max. plate spacing: 790 mm Screw diameter: 35 mm Displacement: 156 cc Spray pressure: 2429 bar Equipment Screen text German CEE socket 16A Air valve 1x Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 Handling Interface Interface USB Schuko socket 10A Tool heater 24x Machine dimensions LxWxH: 5.35m x 1.7m x 2m Total Weight: 6500KG

Key data: 800 kN, 25 mm

Stock No.: 503576 Manufacturer: ARBURG Type: Allrounder 900 T 800-150 Control: Year of Make: 2010 Hours: 72154 h Clamping force: 800 kN Tie-bar dimension h x v: 900 x 900 mm Min. installation height: 250 mm Plate spacing max.: 550 mm Opening travel: 300 mm Screw diameter: 25 mm Displacement: 54 cc Spray pressure: 2500 bar Equipment Screen text German Air valve 1x Machine with rotary table Machine with water battery Levelling elements Interface BDE Machine dimensions LxWxH: 3.8m x 1.85m x 2.15m Total Weight: 5000KG

Key data: 800 kN, 30 mm

Stock No.: 503561 Manufacturer: ENGEL Type: VICTORY 200-80 Tech Control: CC100 Year of Make: 2005 Hours: 76988 h Clamping force: 800 kN Plate size h x v: 670 x 600 mm Min. installation height: 250 mm Plate spacing max.: 700 mm Opening travel: 450 mm Screw diameter: 30 mm Displacement: 99 cc Spray pressure: 1450 bar Equipment Screen text German CEE socket 16A Core pull hydraulic 1x Machine including conveyor belt Machine including handling Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A Machine dimensions LxWxH: 4.05m x 1.93m x 2.2m Total Weight: 5200KG Technical Data Handling Machine type : Linear handling Make: Engel Control: ER-HLI 31 VC Year of Make: 2005 Handling weight: 2 kg On-screen text: German Total weight: 250 kg

Key data: 800 kN, 40 mm

Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of Make: 2021 Hours: 5646 h Clamping force: 800 kN Holm dimension h x v: 420 x 420 mm Panel size h x v: 670 x 670 mm Min. installation height: 250 mm Plate spacing max.: 750 mm Opening travel: 500 mm Screw diameter: 40 mm Displacement: 201 cc Spray pressure: 1860 bar Equipment 3 freely programmable inputs and outputs Screen text German Screentext Polish CEE socket 16A CEE socket 32A Increased ejector force Core pull hydraulic 1x Air valve 1x Machine with material hopper Machine with water battery Levelling elements Plasticizing unit highly wear-resistant and corrosion-resistant Interface BDE Interface for coloring device Interface USB Schuko socket 10A Machine dimensions LxWxH: 4.3m x 1.6m x 2m Total Weight: 3900KG

Key data: 500 kN, 25 mm

Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direct Year of Make: 2013 Hours: 36163 h Clamping force: 500 kN Min. installation height: 200 mm Max. installation height: 550 mm Plate spacing max.: 302 mm Opening travel: 225 mm Size rotary table D: 900 mm Screw diameter: 25 mm Displacement: 59 cc Spray pressure: 2500 bar Equipment Screen text German Turntable Core pull hydraulic 1x Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface EUROMAP 73 Ejector plate fuse interface Machine dimensions LxWxH: 3m x 1.6m x 3.48m Total weight: 3540 KG

Hydraulic injection moulding machine manufactured in 2007. This Krauss Maffei 300-1400 CX features a clamping force of 3,000 kN and a tie bar distance of 630 × 630 mm. It includes a hydraulic clamping unit drive and an injection unit size of 300–1400. If you are looking to get high-quality moulding capabilities, consider the Krauss Maffei 300-1400 CX machine we have for sale. Contact us for further details.

Well used Krauss Maffei free loaded truck to return.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

Specification Injection Molding Machine Demag Systec Servo 420/820-2300 General data Clamping force: 420 t Year of Make: 2015 Control: NC5 Total connected load: 78 kW Weight: 21,000 kg Dimensions (L x W x H): 8.02 x 2.21 x 2.57 m Clamping unit Size of the clamping plates: 1200 x 1200 mm Clearance spar spacing: 820 x 820 mm Tool installation height: 380 - 825 mm Opening travel: 770 mm Max. plate spacing: 1595 mm Ejector force: 96 kN Ejector travel: 230 mm Injection Unit 2300 Screw diameter: 70 mm Spray volume: 1212 ccm Injection weight in hp: 1,100 g Spec. Spray pressure: 1877 bar L/D Screw Ratio: 20 Hydr. Drive power: 51 kW Cylinder heating capacity: 27 kW Facilities Hydraulic core pull: 4 (+ 2 additional connections on the hard drive) Hydraulic cascades: 4 Hot runner control points (zones): 40 Servo-hydraulic pump drive activeDrive (energy-saving) In ...

Specification Injection Moulding Machine Demag Ergotech 650/1000-3300 General data Clamping force: 650 t Year of Make: 2005 Control: NC4 Clamping unit Size of the clamping plates: 1450 x 1350 mm Clearance spar spacing: 1000 x 900 mm Tool installation height: 450 - 950 mm Opening travel: 930 mm Max. plate spacing: 1880 mm Ejector force: 96 kN Ejector travel: 300 mm Injection Unit 3300 Screw diameter: 80 mm Injection volume: 1779 ccm Injection weight in hp: 1600 g Spec. Spray pressure: 1855 bar L/D Screw Ratio: 20 Facilities Hydraulic core pull: 4 Hydraulic cascades: 8 Hot runner control points (zones): 16 Robot Wittmann W 843 Pro, built in 2021 (Z 3,000 / Y 2,000 / X 1,200 mm, C-axis servo 180°, B-axis servo 270°) included in the scope of delivery

Specification Injection Moulding Machine Demag System 1300/1500-11500 General data Clamping force: 1300 t Year of Make: 2008 Control: NC4 Total connected load: 189 kW Weight: 86,700 kg Dimensions (L x W x H): 8.09 x 3.41 x 2.99 m + 6.25 x 2.58 x 2.99 m Clamping unit Size of the clamping plates: 2150 x 1880 mm Lights spar spacing: 1500 x 1250 mm Tool installation height: 700 - 1400 mm Opening travel: 1500 mm Max. panel spacing: 2900 mm Ejector force: 233 kN Ejector travel: 350 mm Injection Unit 11500 Screw diameter: 110 mm Spray volume: 5797 cc Injection weight in hp: 5200 g Spec. Spray pressure: 1971 bar L/D Screw Ratio: 24 Hydr. Drive power: 110 kW Cylinder heating capacity: 79.1 kW Facilities Hydraulic core pull: 4 Hydraulic cascades: 12 Hot runner control points (zones): 32 Robot Wittmann DR 853, built in 2014 (Z 3,500 / Y 2,500 / X 1,600 mm, C-axis ...

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

Key data: 2700 kN, 29 g/PS

We offer this DESMA D 969.250 Z (S3) rubber processing machine in mint condition, built in 2021. Clamping force: 2700 kN Injection volume: 500 cm³ Injection pressure: 3500 bar EUROMAP size: 2700-1750 Voltage: 400 V Frequency: 50 Hz Short circuit current max.: 10 kA Total current: 138 A Pre-fuse: 160 A Pump pressure: 265 bar Pump drive capacity: 72/39 l/min Pump drive current consumption: 32.0 A Pump drive power: 22 kW Nozzle application force: 58 kN Weight: 10.7 t Compressed air volume flow: 0.5 m³/h Compressed air pressure: 6 bar Cooling water volume flow: 1.6 m³/h Cooling water temperature max.: 20 °C Hydraulic motor hours: 730 hours, Hydraulic pump (clamping force): 65 Hours, Operating System: active 3,360 hours Ideal for the production of: - Technical moulded rubber parts - Seals and O-rings - Automotive and industrial components Condition & Avai ...

A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTM ...

Vertical injection moulding machine manufactured in 2016. This Battenfeld CM 40 features a machine weight of 5200 kg and a working height of 1000 mm. The machine is equipped with a robust safety system, ensuring operational safety. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld CM 40 machine we have for sale. Contact us for further details.

Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: ap ...

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999

Injection moulding machine Ferromatik K 125s/2f BJ 1995

Injection Molding Machine Ferromatik 110s-2F BJ 1999

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008

Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.